| Message ID | 20230314121216.413434-2-schnelle@linux.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v3,01/38] Kconfig: introduce HAS_IOPORT option and select it as necessary | expand |
On Tue, 2023-03-14 at 14:29 +0100, Arnd Bergmann wrote: > On Tue, Mar 14, 2023, at 13:11, Niklas Schnelle wrote: > > We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O > > Port access. In a future patch HAS_IOPORT=n will disable compilation of > > the I/O accessor functions inb()/outb() and friends on architectures > > which can not meaningfully support legacy I/O spaces such as s390. Also > > add dependencies on HAS_IOPORT for the ISA and HAVE_EISA config options > > as these busses always go along with HAS_IOPORT. > > > > The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs > > for HAS_IOPORT specific sections will be added in subsequent patches on > > a per subsystem basis. > > I think it would be helpful to enumerate which architectures > do not get HAS_IOPORT added, as they will be affected more. > > > Co-developed-by: Arnd Bergmann <arnd@kernel.org> > > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> > > If there are no objections, I could send this first patch for the > asm-generic tree as a preparation for 6.3, so we are able to merge > the other patches through subsystem maintainer tree for 6.4. > > arch/loongarch/ will now also need to select HAS_IOPORT > uncontitionally, this architecture was added after you > sent v2. Ah right. Added "select HAS_IOPORT" for LoongArch. > > > diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig > > index a98940e64243..5eeacc72e4da 100644 > > --- a/arch/parisc/Kconfig > > +++ b/arch/parisc/Kconfig > > @@ -47,6 +47,7 @@ config PARISC > > select MODULES_USE_ELF_RELA > > select CLONE_BACKWARDS > > select TTY # Needed for pdc_cons.c > > + select HAS_IOPORT if PCI > > It's also needed for EISA and I think you should select it > from CONFIG_GSC in drivers/parisc/Kconfig for this purpose. > > This could also be 'select HAS_IOPORT if PCI || EISA', but > that would require removing the 'depends on HAS_IOPORT' > under drivers/eisa/. I did use "select HAS_IOPORT if PCI || ISA || ATARI_ROM_ISA" in m68k so I think ideally we would handle both in the same way. I don't have a strong preference but I think the "select HAS_IOPORT if ..." puts it all in a single place which is nice. Also I think this would make it more similar architectures with unconditional HAS_IOPORT that thus don't need "depends on HAS_IOPORT" in their "config ISA" either. As also pointed by your comment below for x86. So will try to go this route. > > > select HAVE_DEBUG_STACKOVERFLOW > > select HAVE_ARCH_AUDITSYSCALL > > select HAVE_ARCH_HASH > > @@ -131,6 +132,7 @@ config STACKTRACE_SUPPORT > > > > config ISA_DMA_API > > bool > > + depends on HAS_IOPORT > > > > This line is not really needed since there is no way to > enable ISA_DMA_API. Removed > > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > index a6c4407d3ec8..f7de646c074a 100644 > > --- a/arch/powerpc/Kconfig > > +++ b/arch/powerpc/Kconfig > > @@ -188,6 +188,7 @@ config PPC > > select GENERIC_SMP_IDLE_THREAD > > select GENERIC_TIME_VSYSCALL > > select GENERIC_VDSO_TIME_NS > > + select HAS_IOPORT if PCI > > select HAVE_ARCH_AUDITSYSCALL > > select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP > > select HAVE_ARCH_HUGE_VMAP if PPC_RADIX_MMU || PPC_8xx > > @@ -1070,7 +1071,6 @@ menu "Bus options" > > > > config ISA > > bool "Support for ISA-bus hardware" > > - depends on PPC_CHRP > > select PPC_I8259 > > help > > Find out whether you have ISA slots on your motherboard. ISA is the > > This line looks wrong, I think we should keep that dependency. > Did you get a circular dependency if you leave it in? I don't recall why this was removed. I guess it happened when I was experimenting with adding "depends on HAS_IOPORT" for the ISA config options but that ultimately lead to circular dependencies, must have messed up when removing this here. > > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > > index a825bf031f49..634dd42532f3 100644 > > --- a/arch/x86/Kconfig > > +++ b/arch/x86/Kconfig > > @@ -162,6 +162,7 @@ config X86 > > select GUP_GET_PXX_LOW_HIGH if X86_PAE > > select HARDIRQS_SW_RESEND > > select HARDLOCKUP_CHECK_TIMESTAMP if X86_64 > > + select HAS_IOPORT > > select HAVE_ACPI_APEI if ACPI > > select HAVE_ACPI_APEI_NMI if ACPI > > select HAVE_ALIGNED_STRUCT_PAGE if SLUB > > @@ -2893,6 +2894,7 @@ if X86_32 > > > > config ISA > > bool "ISA support" > > + depends on HAS_IOPORT > > help > > HAS_IOPORT is selected unconditionally already, so this doesn't > really do anything. Removed. > > > diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb > > index 3b9a44008433..c68e4d9dcecb 100644 > > --- a/lib/Kconfig.kgdb > > +++ b/lib/Kconfig.kgdb > > @@ -121,7 +121,8 @@ config KDB_DEFAULT_ENABLE > > > > config KDB_KEYBOARD > > bool "KGDB_KDB: keyboard as input device" > > - depends on VT && KGDB_KDB && !PARISC > > + depends on HAS_IOPORT > > + depends on VT && KGDB_KDB > > default n > > This loses the !PARISC dependency, which I don't think is > intentional. The added HAS_IOPORT dependency makes sense > here, but I think this should be in a different patch > and not in the preparation. > > Arnd Agree will put into its own patch and re-add the !PARISC
On Tue, 2023-03-14 at 13:11 +0100, Niklas Schnelle wrote: > We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O > Port access. In a future patch HAS_IOPORT=n will disable compilation of > the I/O accessor functions inb()/outb() and friends on architectures > which can not meaningfully support legacy I/O spaces such as s390. Also > add dependencies on HAS_IOPORT for the ISA and HAVE_EISA config options > as these busses always go along with HAS_IOPORT. > > The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs > for HAS_IOPORT specific sections will be added in subsequent patches on > a per subsystem basis. > > Co-developed-by: Arnd Bergmann <arnd@kernel.org> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> > --- > @Arnd, I swear I asked you and then added Signed-off-bys for all these Co-developed-bys as suggested by checkpatch. Sadly that must have been during my failed attempt of converting to b4 prep / b4 send before sending this last Friday and then it got lost. It almost worked and is a very nice work flow except that b4 currently can only use a single list of To/Cc fields and for this treewide series that would probably hit mail server limits. Added it now. Thanks, Niklas
On Tue, 2023-03-14 at 13:37 +0100, Johannes Berg wrote: > On Tue, 2023-03-14 at 13:11 +0100, Niklas Schnelle wrote: > > --- a/arch/um/Kconfig > > +++ b/arch/um/Kconfig > > @@ -56,6 +56,7 @@ config NO_IOPORT_MAP > > > > config ISA > > bool > > + depends on HAS_IOPORT > > > > config ISA here is already unselectable, and nothing ever does "select > ISA" (only in some other architectures), so is there much point in this? > > I'm not even sure why this exists at all. You're right there's not much point and I dropped this for v4. I agree that probably the whole "config ISA" could be removed if it's always false anyway but that seems out of scope for this patch. > > But anyway, adding a dependency to a always-false symbol doesn't make it > less always-false :-) > > Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um Thanks > > > Certainly will be nice to get rid of this cruft for architectures that > don't have it. > > johannes Yes, also, for s390 the broken NULL + port number access in the generic inb()/outb() currently causes the only remaining clang warning on defconfig builds.
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 780d4673c3ca..a5c2b1aa46b0 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -27,6 +27,7 @@ config ALPHA select AUDIT_ARCH select GENERIC_CPU_VULNERABILITIES select GENERIC_SMP_IDLE_THREAD + select HAS_IOPORT select HAVE_ARCH_AUDITSYSCALL select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e24a9820e12f..4acb5bc4b52a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -70,6 +70,7 @@ config ARM select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD select HARDIRQS_SW_RESEND + select HAS_IOPORT select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 1023e896d46b..b740019c4aee 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -145,6 +145,7 @@ config ARM64 select GENERIC_GETTIMEOFDAY select GENERIC_VDSO_TIME_NS select HARDIRQS_SW_RESEND + select HAS_IOPORT select HAVE_MOVE_PMD select HAVE_MOVE_PUD select HAVE_PCI diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d7e4a24e8644..2e13ec8263b9 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -25,6 +25,7 @@ config IA64 select PCI_DOMAINS if PCI select PCI_MSI select PCI_SYSCALL if PCI + select HAS_IOPORT select HAVE_ASM_MODVERSIONS select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_EXIT_THREAD diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 82154952e574..40198a1ebe27 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -18,6 +18,7 @@ config M68K select GENERIC_CPU_DEVICES select GENERIC_IOMAP select GENERIC_IRQ_SHOW + select HAS_IOPORT if PCI || ISA || ATARI_ROM_ISA select HAVE_ARCH_SECCOMP select HAVE_ARCH_SECCOMP_FILTER select HAVE_ASM_MODVERSIONS diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index cc88af6fa7a4..211f338d6235 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -21,6 +21,7 @@ config MICROBLAZE select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK + select HAS_IOPORT if PCI select HAVE_ARCH_HASH select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e2f3ca73f40d..64760fcd7b52 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -47,6 +47,7 @@ config MIPS select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT + select HAS_IOPORT if !NO_IOPORT_MAP select HAVE_ARCH_COMPILER_H select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT @@ -3120,6 +3121,7 @@ config PCI_DRIVERS_LEGACY # users to choose the right thing ... # config ISA + depends on HAS_IOPORT bool config TC diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index a98940e64243..5eeacc72e4da 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,6 +47,7 @@ config PARISC select MODULES_USE_ELF_RELA select CLONE_BACKWARDS select TTY # Needed for pdc_cons.c + select HAS_IOPORT if PCI select HAVE_DEBUG_STACKOVERFLOW select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HASH @@ -131,6 +132,7 @@ config STACKTRACE_SUPPORT config ISA_DMA_API bool + depends on HAS_IOPORT config ARCH_MAY_HAVE_PC_FDC bool diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a6c4407d3ec8..f7de646c074a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -188,6 +188,7 @@ config PPC select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select GENERIC_VDSO_TIME_NS + select HAS_IOPORT if PCI select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP select HAVE_ARCH_HUGE_VMAP if PPC_RADIX_MMU || PPC_8xx @@ -1070,7 +1071,6 @@ menu "Bus options" config ISA bool "Support for ISA-bus hardware" - depends on PPC_CHRP select PPC_I8259 help Find out whether you have ISA slots on your motherboard. ISA is the diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index c5e42cc37604..b957d12a171b 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -74,6 +74,7 @@ config RISCV select GENERIC_TIME_VSYSCALL if MMU && 64BIT select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO select HARDIRQS_SW_RESEND + select HAS_IOPORT if MMU select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0665ac0add0b..cfb797bc4200 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -25,6 +25,7 @@ config SUPERH select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD select GUP_GET_PXX_LOW_HIGH if X2TLB + select HAS_IOPORT if HAS_IOPORT_MAP select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 84437a4c6545..d4c1d96f85cd 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -32,6 +32,7 @@ config SPARC select GENERIC_IRQ_SHOW select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_PCI_IOMAP + select HAS_IOPORT select HAVE_NMI_WATCHDOG if SPARC64 select HAVE_CBPF_JIT if SPARC32 select HAVE_EBPF_JIT if SPARC64 diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 541a9b18e343..452d268be2e8 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -56,6 +56,7 @@ config NO_IOPORT_MAP config ISA bool + depends on HAS_IOPORT config SBUS bool diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a825bf031f49..634dd42532f3 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -162,6 +162,7 @@ config X86 select GUP_GET_PXX_LOW_HIGH if X86_PAE select HARDIRQS_SW_RESEND select HARDLOCKUP_CHECK_TIMESTAMP if X86_64 + select HAS_IOPORT select HAVE_ACPI_APEI if ACPI select HAVE_ACPI_APEI_NMI if ACPI select HAVE_ALIGNED_STRUCT_PAGE if SLUB @@ -2893,6 +2894,7 @@ if X86_32 config ISA bool "ISA support" + depends on HAS_IOPORT help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 7bfe998f3514..fcfa280df98a 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -81,7 +81,7 @@ config MOXTET config HISILICON_LPC bool "Support for ISA I/O space on HiSilicon Hip06/7" depends on (ARM64 && ARCH_HISI) || (COMPILE_TEST && !ALPHA && !HEXAGON && !PARISC) - depends on HAS_IOMEM + depends on HAS_IOPORT select INDIRECT_PIO if ARM64 help Driver to enable I/O access to devices attached to the Low Pin diff --git a/drivers/eisa/Kconfig b/drivers/eisa/Kconfig index c8bbf90209f5..d3f62de72259 100644 --- a/drivers/eisa/Kconfig +++ b/drivers/eisa/Kconfig @@ -5,6 +5,7 @@ config HAVE_EISA bool + depends on HAS_IOPORT menuconfig EISA bool "EISA support" diff --git a/lib/Kconfig b/lib/Kconfig index ce2abffb9ed8..5c2da561c516 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -92,6 +92,7 @@ config ARCH_USE_SYM_ANNOTATIONS config INDIRECT_PIO bool "Access I/O in non-MMIO mode" depends on ARM64 + depends on HAS_IOPORT help On some platforms where no separate I/O space exists, there are I/O hosts which can not be accessed in MMIO mode. Using the logical PIO @@ -509,6 +510,9 @@ config HAS_IOMEM depends on !NO_IOMEM default y +config HAS_IOPORT + bool + config HAS_IOPORT_MAP bool depends on HAS_IOMEM && !NO_IOPORT_MAP diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb index 3b9a44008433..c68e4d9dcecb 100644 --- a/lib/Kconfig.kgdb +++ b/lib/Kconfig.kgdb @@ -121,7 +121,8 @@ config KDB_DEFAULT_ENABLE config KDB_KEYBOARD bool "KGDB_KDB: keyboard as input device" - depends on VT && KGDB_KDB && !PARISC + depends on HAS_IOPORT + depends on VT && KGDB_KDB default n help KDB can use a PS/2 type keyboard for an input device
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O Port access. In a future patch HAS_IOPORT=n will disable compilation of the I/O accessor functions inb()/outb() and friends on architectures which can not meaningfully support legacy I/O spaces such as s390. Also add dependencies on HAS_IOPORT for the ISA and HAVE_EISA config options as these busses always go along with HAS_IOPORT. The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs for HAS_IOPORT specific sections will be added in subsequent patches on a per subsystem basis. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> --- arch/alpha/Kconfig | 1 + arch/arm/Kconfig | 1 + arch/arm64/Kconfig | 1 + arch/ia64/Kconfig | 1 + arch/m68k/Kconfig | 1 + arch/microblaze/Kconfig | 1 + arch/mips/Kconfig | 2 ++ arch/parisc/Kconfig | 2 ++ arch/powerpc/Kconfig | 2 +- arch/riscv/Kconfig | 1 + arch/sh/Kconfig | 1 + arch/sparc/Kconfig | 1 + arch/um/Kconfig | 1 + arch/x86/Kconfig | 2 ++ drivers/bus/Kconfig | 2 +- drivers/eisa/Kconfig | 1 + lib/Kconfig | 4 ++++ lib/Kconfig.kgdb | 3 ++- 18 files changed, 25 insertions(+), 3 deletions(-)