@@ -337,6 +337,32 @@ static bool witherspoon_probe(void)
{
if (!dt_node_is_compatible(dt_root, "ibm,witherspoon"))
return false;
+ if (!dt_find_by_name(dt_root, "ibm,pcie-slots"))
+ return false;
+ if (!dt_find_compatible_node(dt_root, NULL, "ibm,power9-npu"))
+ return false;
+
+ /* Lot of common early inits here */
+ astbmc_early_init();
+
+ /* Setup UART for use by OPAL (Linux hvc) */
+ uart_set_console_policy(UART_CONSOLE_OPAL);
+
+ return true;
+}
+
+static bool old_witherspoon_probe(void)
+{
+ struct dt_node *slots, *npu;
+
+ if (!dt_node_is_compatible(dt_root, "ibm,witherspoon"))
+ return false;
+
+ slots = dt_find_by_name(dt_root, "ibm,pcie-slots");
+ npu = dt_find_compatible_node(dt_root, NULL, "ibm,power9-npu");
+
+ if (slots && npu)
+ return false;
/* Lot of common early inits here */
astbmc_early_init();
@@ -344,11 +370,15 @@ static bool witherspoon_probe(void)
/* Setup UART for use by OPAL (Linux hvc) */
uart_set_console_policy(UART_CONSOLE_OPAL);
+
/* Add NPU2 bindings */
- dt_create_npu2();
+ if (!npu)
+ dt_create_npu2();
slot_table_init(witherspoon_phb_table);
+ prerror("!!! Old witherspoon firmware detected. Update hostboot and fix the Planar VPD !!!\n");
+
return true;
}
@@ -437,7 +467,9 @@ static void witherspoon_pre_pci_fixup(void)
phb4_pre_pci_fixup_witherspoon();
}
-DECLARE_PLATFORM(witherspoon_platform) = {
+/* The only difference between these is the PCI slot handling */
+
+DECLARE_PLATFORM(witherspoon) = {
.name = "Witherspoon",
.probe = witherspoon_probe,
.init = astbmc_init,
@@ -445,11 +477,29 @@ DECLARE_PLATFORM(witherspoon_platform) = {
.start_preload_resource = flash_start_preload_resource,
.resource_loaded = flash_resource_loaded,
.bmc = &astbmc_openbmc,
- .pci_get_slot_info = slot_table_get_slot_info,
- .pci_probe_complete = check_all_slot_table,
.cec_power_down = astbmc_ipmi_power_down,
.cec_reboot = astbmc_ipmi_reboot,
.elog_commit = ipmi_elog_commit,
.exit = ipmi_wdt_final_reset,
.terminate = ipmi_terminate,
+
+ .pci_get_slot_info = map_pci_dev_to_slot,
+};
+
+DECLARE_PLATFORM(old_witherspoon) = {
+ .name = "Witherspoon (old)",
+ .probe = old_witherspoon_probe,
+ .init = astbmc_init,
+ .pre_pci_fixup = witherspoon_pre_pci_fixup,
+ .start_preload_resource = flash_start_preload_resource,
+ .resource_loaded = flash_resource_loaded,
+ .bmc = &astbmc_openbmc,
+ .cec_power_down = astbmc_ipmi_power_down,
+ .cec_reboot = astbmc_ipmi_reboot,
+ .elog_commit = ipmi_elog_commit,
+ .exit = ipmi_wdt_final_reset,
+ .terminate = ipmi_terminate,
+
+ .pci_get_slot_info = slot_table_get_slot_info,
+ .pci_probe_complete = check_all_slot_table,
};
In the future we will always create the npu nodes based on what's in the HDAT. For now we seperate witherspoon into an old and new platform where the old platform will assume a sequoia planar and create the relevant NPU nodes for that planar. If you have a redbud system this will be broken, but this should be fine for most cases. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> --- platforms/astbmc/witherspoon.c | 58 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 4 deletions(-)