deleted file mode 100644
@@ -1,31 +0,0 @@
-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
- "abracon,abx80x"
- "abracon,ab0801"
- "abracon,ab0803"
- "abracon,ab0804"
- "abracon,ab0805"
- "abracon,ab1801"
- "abracon,ab1803"
- "abracon,ab1804"
- "abracon,ab1805"
- "microcrystal,rv1805"
- Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
- resistor, the other values are in kOhm.
new file mode 100644
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/alarm chip
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+ The Abracon ABX80X family consists of the ab0801, ab0803, ab0804, ab0805,
+ ab1801, ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and
+ the ab1805 is the superset of ab180x.
+
+properties:
+ compatible:
+ enum:
+ - abracon,abx80x # Enables chip auto-detection
+ - abracon,ab0801
+ - abracon,ab0803
+ - abracon,ab0804
+ - abracon,ab0805
+ - abracon,ab1801
+ - abracon,ab1803
+ - abracon,ab1804
+ - abracon,ab1805
+ - microcrystal,rv1805
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ abracon,tc-diode:
+ description:
+ Select the series diode configuration for the trickle charger, between a
+ standard diode (0.6V) and a Schottky diode (0.3V).
+ enum: [standard, schottky]
+
+ abracon,tc-resistor:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Select the series output resistor value for the tricker charger, in kOhm.
+ enum: [0, 3, 6, 11]
+
+dependentRequired:
+ abracon,tc-diode: ["abracon,tc-resistor"]
+ abracon,tc-resistor: ["abracon,tc-diode"]
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: rtc.yaml#
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - abracon,ab0804
+ - abracon,ab1804
+ - abracon,ab0805
+ - abracon,ab1805
+ then:
+ properties:
+ abracon,tc-diode: false
+ abracon,tc-resistor: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@69 {
+ compatible = "abracon,ab1805";
+ reg = <0x69>;
+ abracon,tc-diode = "schottky";
+ abracon,tc-resistor = <3>;
+ };
+ };
+...
Convert the abx80x DT bindings to YAML schema. The existing properties are kept without modification, and the interrupt property is added as it is supported by the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- If someone wants to volunteer as a maintainer, by all means, please fee to replace me :-) --- .../bindings/rtc/abracon,abx80x.txt | 31 ------- .../bindings/rtc/abracon,abx80x.yaml | 89 +++++++++++++++++++ 2 files changed, 89 insertions(+), 31 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/abracon,abx80x.txt create mode 100644 Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml