diff mbox series

[23/24] arm64: dts: qcom: sc8280xp-crd: enable rtc

Message ID 20230126142057.25715-24-johan+linaro@kernel.org
State Superseded
Headers show
Series rtc: pm8xxx: add support for setting time using nvmem | expand

Commit Message

Johan Hovold Jan. 26, 2023, 2:20 p.m. UTC
The SC8280XP CRD firmware does not implement the UEFI time runtime
services so the RTC in the PM8280K PMIC needs to be accessed directly.

To complicate things further, the RTC control and time registers are
read-only on this platform so an offset must be stored in some other
machine-specific non-volatile memory which an RTC driver can take into
account when reading or updating the time.

The UEFI firmware (and Windows) use a UEFI variable for this:


but the offset can only be accessed via the Qualcomm UEFI Secure
Application residing in the TEE as the firmware does not implement the
variable runtime services either.

Unfortunately setting variables using this interface does not work on
the CRD so updating the time would not be possible. Instead, reserve
four bytes in one of the PMIC SDAM blocks to hold the RTC offset.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series


diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index c780b82e498d..192e076345d2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -500,6 +500,21 @@  &pmk8280_pon_pwrkey {
 	status = "okay";
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+	status = "okay";
+&pmk8280_sdam_6 {
+	status = "okay";
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
 &qup0 {
 	status = "okay";