diff mbox series

[v3,2/6] rtc: rzn1: Add new RTC driver

Message ID 20220429104602.368055-3-miquel.raynal@bootlin.com
State Superseded
Headers show
Series RZN1 RTC support | expand

Commit Message

Miquel Raynal April 29, 2022, 10:45 a.m. UTC
From: Michel Pollet <michel.pollet@bp.renesas.com>

Add a basic RTC driver for the RZ/N1.

Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/rtc/Kconfig    |   7 ++
 drivers/rtc/Makefile   |   1 +
 drivers/rtc/rtc-rzn1.c | 246 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 254 insertions(+)
 create mode 100644 drivers/rtc/rtc-rzn1.c

Comments

Geert Uytterhoeven May 2, 2022, 2:41 p.m. UTC | #1
Hi Miquel,

On Fri, Apr 29, 2022 at 12:46 PM Miquel Raynal
<miquel.raynal@bootlin.com> wrote:
> From: Michel Pollet <michel.pollet@bp.renesas.com>
>
> Add a basic RTC driver for the RZ/N1.
>
> Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
> Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Thanks for your patch!

> --- /dev/null
> +++ b/drivers/rtc/rtc-rzn1.c
> @@ -0,0 +1,246 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Renesas RZN1 Real Time Clock interface for Linux

RZ/N1

> +static int rzn1_rtc_probe(struct platform_device *pdev)
> +{
> +       struct rzn1_rtc *rtc;
> +       int ret;
> +
> +       rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
> +       if (!rtc)
> +               return -ENOMEM;
> +
> +       platform_set_drvdata(pdev, rtc);
> +
> +       rtc->base = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(rtc->base))
> +               return dev_err_probe(&pdev->dev, PTR_ERR(rtc->base), "Missing reg\n");
> +
> +       rtc->rtcdev = devm_rtc_allocate_device(&pdev->dev);
> +       if (IS_ERR(rtc->rtcdev))
> +               return PTR_ERR(rtc);
> +
> +       rtc->rtcdev->range_min = RTC_TIMESTAMP_BEGIN_2000;
> +       rtc->rtcdev->range_max = RTC_TIMESTAMP_END_2099;
> +       rtc->rtcdev->ops = &rzn1_rtc_ops;
> +       clear_bit(RTC_FEATURE_ALARM, rtc->rtcdev->features);
> +       clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->rtcdev->features);
> +
> +       pm_runtime_enable(&pdev->dev);
> +       pm_runtime_get_sync(&pdev->dev);

While this call cannot really fail on this platform, you may want to
call pm_runtime_resume_and_get() instead, and check its return
value (else the janitors will make that change later ;-)

> +
> +       /*
> +        * Ensure the clock counter is enabled.
> +        * Set 24-hour mode and possible oscillator offset compensation in SUBU mode.
> +        */
> +       writel(RZN1_RTC_CTL0_CE | RZN1_RTC_CTL0_AMPM | RZN1_RTC_CTL0_SLSB_SUBU,
> +              rtc->base + RZN1_RTC_CTL0);
> +
> +       /* Disable all interrupts */
> +       writel(0, rtc->base + RZN1_RTC_CTL1);
> +
> +       ret = devm_rtc_register_device(rtc->rtcdev);
> +       if (ret)
> +               goto dis_runtime_pm;
> +
> +       return 0;
> +
> +dis_runtime_pm:
> +       pm_runtime_put_sync(&pdev->dev);

pm_runtime_put() should be fine, no need for the synchronous version.

> +       pm_runtime_disable(&pdev->dev);
> +
> +       return ret;
> +}
> +
> +static int rzn1_rtc_remove(struct platform_device *pdev)
> +{
> +       pm_runtime_put_sync(&pdev->dev);

pm_runtime_put().

> +       pm_runtime_disable(&pdev->dev);
> +
> +       return 0;
> +}

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Miquel Raynal May 9, 2022, 2:59 p.m. UTC | #2
Hi Geert,

geert@linux-m68k.org wrote on Mon, 2 May 2022 16:41:20 +0200:

> Hi Miquel,
> 
> On Fri, Apr 29, 2022 at 12:46 PM Miquel Raynal
> <miquel.raynal@bootlin.com> wrote:
> > From: Michel Pollet <michel.pollet@bp.renesas.com>
> >
> > Add a basic RTC driver for the RZ/N1.
> >
> > Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
> > Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>  
> 
> Thanks for your patch!
> 
> > --- /dev/null
> > +++ b/drivers/rtc/rtc-rzn1.c
> > @@ -0,0 +1,246 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Renesas RZN1 Real Time Clock interface for Linux  
> 
> RZ/N1

Done.

> 
> > +static int rzn1_rtc_probe(struct platform_device *pdev)
> > +{
> > +       struct rzn1_rtc *rtc;
> > +       int ret;
> > +
> > +       rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
> > +       if (!rtc)
> > +               return -ENOMEM;
> > +
> > +       platform_set_drvdata(pdev, rtc);
> > +
> > +       rtc->base = devm_platform_ioremap_resource(pdev, 0);
> > +       if (IS_ERR(rtc->base))
> > +               return dev_err_probe(&pdev->dev, PTR_ERR(rtc->base), "Missing reg\n");
> > +
> > +       rtc->rtcdev = devm_rtc_allocate_device(&pdev->dev);
> > +       if (IS_ERR(rtc->rtcdev))
> > +               return PTR_ERR(rtc);
> > +
> > +       rtc->rtcdev->range_min = RTC_TIMESTAMP_BEGIN_2000;
> > +       rtc->rtcdev->range_max = RTC_TIMESTAMP_END_2099;
> > +       rtc->rtcdev->ops = &rzn1_rtc_ops;
> > +       clear_bit(RTC_FEATURE_ALARM, rtc->rtcdev->features);
> > +       clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->rtcdev->features);
> > +
> > +       pm_runtime_enable(&pdev->dev);
> > +       pm_runtime_get_sync(&pdev->dev);  
> 
> While this call cannot really fail on this platform, you may want to
> call pm_runtime_resume_and_get() instead, and check its return
> value (else the janitors will make that change later ;-)

Right, I misunderstood the doc, I'll change it.

> 
> > +
> > +       /*
> > +        * Ensure the clock counter is enabled.
> > +        * Set 24-hour mode and possible oscillator offset compensation in SUBU mode.
> > +        */
> > +       writel(RZN1_RTC_CTL0_CE | RZN1_RTC_CTL0_AMPM | RZN1_RTC_CTL0_SLSB_SUBU,
> > +              rtc->base + RZN1_RTC_CTL0);
> > +
> > +       /* Disable all interrupts */
> > +       writel(0, rtc->base + RZN1_RTC_CTL1);
> > +
> > +       ret = devm_rtc_register_device(rtc->rtcdev);
> > +       if (ret)
> > +               goto dis_runtime_pm;
> > +
> > +       return 0;
> > +
> > +dis_runtime_pm:
> > +       pm_runtime_put_sync(&pdev->dev);  
> 
> pm_runtime_put() should be fine, no need for the synchronous version.

Right, there is no need for the _sync() version here and below I
believe.

> 
> > +       pm_runtime_disable(&pdev->dev);
> > +
> > +       return ret;
> > +}
> > +
> > +static int rzn1_rtc_remove(struct platform_device *pdev)
> > +{
> > +       pm_runtime_put_sync(&pdev->dev);  
> 
> pm_runtime_put().
> 
> > +       pm_runtime_disable(&pdev->dev);
> > +
> > +       return 0;
> > +}  
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds


Thanks,
Miquèl
diff mbox series

Patch

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 41c65b4d2baf..a00f901b5c1d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1548,6 +1548,13 @@  config RTC_DRV_RS5C313
 	help
 	  If you say yes here you get support for the Ricoh RS5C313 RTC chips.
 
+config RTC_DRV_RZN1
+	tristate "Renesas RZ/N1 RTC"
+	depends on ARCH_RZN1 || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	help
+	  If you say yes here you get support for the Renesas RZ/N1 RTC.
+
 config RTC_DRV_GENERIC
 	tristate "Generic RTC support"
 	# Please consider writing a new RTC driver instead of using the generic
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2d827d8261d5..fb04467b652d 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -151,6 +151,7 @@  obj-$(CONFIG_RTC_DRV_RX6110)	+= rtc-rx6110.o
 obj-$(CONFIG_RTC_DRV_RX8010)	+= rtc-rx8010.o
 obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
 obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+obj-$(CONFIG_RTC_DRV_RZN1)	+= rtc-rzn1.o
 obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
 obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
 obj-$(CONFIG_RTC_DRV_S5M)	+= rtc-s5m.o
diff --git a/drivers/rtc/rtc-rzn1.c b/drivers/rtc/rtc-rzn1.c
new file mode 100644
index 000000000000..19f323f62f20
--- /dev/null
+++ b/drivers/rtc/rtc-rzn1.c
@@ -0,0 +1,246 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Renesas RZN1 Real Time Clock interface for Linux
+ *
+ * Copyright:
+ * - 2014 Renesas Electronics Europe Limited
+ * - 2022 Schneider Electric
+ *
+ * Authors:
+ * - Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com>
+ * - Miquel Raynal <miquel.raynal@bootlin.com>
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/rtc.h>
+#include <linux/soc/renesas/r9a06g032-sysctrl.h>
+
+#define RZN1_RTC_CTL0 0x00
+#define   RZN1_RTC_CTL0_SLSB_SUBU 0
+#define   RZN1_RTC_CTL0_SLSB_SCMP BIT(4)
+#define   RZN1_RTC_CTL0_AMPM BIT(5)
+#define   RZN1_RTC_CTL0_CE BIT(7)
+
+#define RZN1_RTC_CTL1 0x04
+#define   RZN1_RTC_CTL1_ALME BIT(4)
+
+#define RZN1_RTC_CTL2 0x08
+#define   RZN1_RTC_CTL2_WAIT BIT(0)
+#define   RZN1_RTC_CTL2_WST BIT(1)
+#define   RZN1_RTC_CTL2_WUST BIT(5)
+#define   RZN1_RTC_CTL2_STOPPED (RZN1_RTC_CTL2_WAIT | RZN1_RTC_CTL2_WST)
+
+#define RZN1_RTC_SEC 0x14
+#define RZN1_RTC_MIN 0x18
+#define RZN1_RTC_HOUR 0x1c
+#define RZN1_RTC_WEEK 0x20
+#define RZN1_RTC_DAY 0x24
+#define RZN1_RTC_MONTH 0x28
+#define RZN1_RTC_YEAR 0x2c
+
+#define RZN1_RTC_SUBU 0x38
+#define   RZN1_RTC_SUBU_DEV BIT(7)
+#define   RZN1_RTC_SUBU_DECR BIT(6)
+
+#define RZN1_RTC_ALM 0x40
+#define RZN1_RTC_ALH 0x44
+#define RZN1_RTC_ALW 0x48
+
+#define RZN1_RTC_SECC 0x4c
+#define RZN1_RTC_MINC 0x50
+#define RZN1_RTC_HOURC 0x54
+#define RZN1_RTC_WEEKC 0x58
+#define RZN1_RTC_DAYC 0x5c
+#define RZN1_RTC_MONTHC 0x60
+#define RZN1_RTC_YEARC 0x64
+
+struct rzn1_rtc {
+	struct rtc_device *rtcdev;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static void rzn1_rtc_get_time_snapshot(struct rzn1_rtc *rtc, struct rtc_time *tm)
+{
+	tm->tm_sec = readl(rtc->base + RZN1_RTC_SECC);
+	tm->tm_min = readl(rtc->base + RZN1_RTC_MINC);
+	tm->tm_hour = readl(rtc->base + RZN1_RTC_HOURC);
+	tm->tm_wday = readl(rtc->base + RZN1_RTC_WEEKC);
+	tm->tm_mday = readl(rtc->base + RZN1_RTC_DAYC);
+	tm->tm_mon = readl(rtc->base + RZN1_RTC_MONTHC);
+	tm->tm_year = readl(rtc->base + RZN1_RTC_YEARC);
+}
+
+static unsigned int rzn1_rtc_tm_to_wday(struct rtc_time *tm)
+{
+	time64_t time;
+	unsigned int days;
+	u32 secs;
+
+	time = rtc_tm_to_time64(tm);
+	days = div_s64_rem(time, 86400, &secs);
+
+	/* day of the week, 1970-01-01 was a Thursday */
+	return (days + 4) % 7;
+}
+
+static int rzn1_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rzn1_rtc *rtc = dev_get_drvdata(dev);
+	u32 val, secs;
+
+	/*
+	 * The RTC was not started or is stopped and thus does not carry the
+	 * proper time/date.
+	 */
+	val = readl(rtc->base + RZN1_RTC_CTL2);
+	if (val & RZN1_RTC_CTL2_STOPPED)
+		return -EINVAL;
+
+	rzn1_rtc_get_time_snapshot(rtc, tm);
+	secs = readl(rtc->base + RZN1_RTC_SECC);
+	if (tm->tm_sec != secs)
+		rzn1_rtc_get_time_snapshot(rtc, tm);
+
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+	tm->tm_wday = bcd2bin(tm->tm_wday);
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon);
+	tm->tm_year = bcd2bin(tm->tm_year);
+
+	return 0;
+}
+
+static int rzn1_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rzn1_rtc *rtc = dev_get_drvdata(dev);
+	u32 val;
+	int ret;
+
+	tm->tm_sec = bin2bcd(tm->tm_sec);
+	tm->tm_min = bin2bcd(tm->tm_min);
+	tm->tm_hour = bin2bcd(tm->tm_hour);
+	tm->tm_wday = bin2bcd(rzn1_rtc_tm_to_wday(tm));
+	tm->tm_mday = bin2bcd(tm->tm_mday);
+	tm->tm_mon = bin2bcd(tm->tm_mon);
+	tm->tm_year = bin2bcd(tm->tm_year);
+
+	val = readl(rtc->base + RZN1_RTC_CTL2);
+	if (!(val & RZN1_RTC_CTL2_STOPPED)) {
+		/* Hold the counter if it was counting up */
+		writel(RZN1_RTC_CTL2_WAIT, rtc->base + RZN1_RTC_CTL2);
+
+		/* Wait for the counter to stop: two 32k clock cycles */
+		usleep_range(61, 100);
+		ret = readl_poll_timeout(rtc->base + RZN1_RTC_CTL2, val,
+					 val & RZN1_RTC_CTL2_WST, 0, 100);
+		if (ret)
+			return ret;
+	}
+
+	writel(tm->tm_sec, rtc->base + RZN1_RTC_SEC);
+	writel(tm->tm_min, rtc->base + RZN1_RTC_MIN);
+	writel(tm->tm_hour, rtc->base + RZN1_RTC_HOUR);
+	writel(tm->tm_wday, rtc->base + RZN1_RTC_WEEK);
+	writel(tm->tm_mday, rtc->base + RZN1_RTC_DAY);
+	writel(tm->tm_mon, rtc->base + RZN1_RTC_MONTH);
+	writel(tm->tm_year, rtc->base + RZN1_RTC_YEAR);
+	writel(0, rtc->base + RZN1_RTC_CTL2);
+
+	return 0;
+}
+
+static const struct rtc_class_ops rzn1_rtc_ops = {
+	.read_time = rzn1_rtc_read_time,
+	.set_time = rzn1_rtc_set_time,
+};
+
+static int rzn1_rtc_probe(struct platform_device *pdev)
+{
+	struct rzn1_rtc *rtc;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rtc->base))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rtc->base), "Missing reg\n");
+
+	rtc->rtcdev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtcdev))
+		return PTR_ERR(rtc);
+
+	rtc->rtcdev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rtc->rtcdev->range_max = RTC_TIMESTAMP_END_2099;
+	rtc->rtcdev->ops = &rzn1_rtc_ops;
+	clear_bit(RTC_FEATURE_ALARM, rtc->rtcdev->features);
+	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->rtcdev->features);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	/*
+	 * Ensure the clock counter is enabled.
+	 * Set 24-hour mode and possible oscillator offset compensation in SUBU mode.
+	 */
+	writel(RZN1_RTC_CTL0_CE | RZN1_RTC_CTL0_AMPM | RZN1_RTC_CTL0_SLSB_SUBU,
+	       rtc->base + RZN1_RTC_CTL0);
+
+	/* Disable all interrupts */
+	writel(0, rtc->base + RZN1_RTC_CTL1);
+
+	ret = devm_rtc_register_device(rtc->rtcdev);
+	if (ret)
+		goto dis_runtime_pm;
+
+	return 0;
+
+dis_runtime_pm:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int rzn1_rtc_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id rzn1_rtc_of_match[] = {
+	{ .compatible	= "renesas,rzn1-rtc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rzn1_rtc_of_match);
+
+static struct platform_driver rzn1_rtc_driver = {
+	.probe = rzn1_rtc_probe,
+	.remove = rzn1_rtc_remove,
+	.driver = {
+		.name	= "rzn1-rtc",
+		.owner	= THIS_MODULE,
+		.of_match_table = rzn1_rtc_of_match,
+	},
+};
+module_platform_driver(rzn1_rtc_driver);
+
+MODULE_AUTHOR("Michel Pollet <Michel.Pollet@bp.renesas.com");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com");
+MODULE_DESCRIPTION("RZ/N1 RTC driver");
+MODULE_LICENSE("GPL");