| Message ID | 20220219072713.5280-1-mat.jonczyk@o2.pl |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | selftests/rtc: continuously read RTC in a loop for 30s | expand |
On 2/19/22 12:27 AM, Mateusz Jończyk wrote: > Some problems with reading the RTC time may happen rarely, for example > while the RTC is updating. So read the RTC many times to catch these > problems. For example, a previous attempt for my > commit ea6fa4961aab ("rtc: mc146818-lib: fix RTC presence check") > was incorrect and would have triggered this selftest. > > To avoid the risk of damaging the hardware, wait 11ms before consecutive > reads. > > In rtc_time_to_timestamp I copied values manually instead of casting - > just to be on the safe side. The 11ms wait period was chosen so that it is > not a divisor of 1000ms. > > Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Shuah Khan <shuah@kernel.org> > --- > > Also, before > commit cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time") > reading the RTC alarm time during RTC update produced incorrect results > on many Intel platforms. Preparing a similar selftest for this case > would be more difficult, though, because the RTC alarm time is cached by > the kernel. Direct access would have to be exposed somehow, for example > in debugfs. I may prepare a patch for it in the future. > --- Looks good to me. We end up tweaking the timeout=210 in settings every now and then. Not sure how we can avoid adjusting it as we find problems. I will apply this in for Linux 5.18-rc1 thanks, -- Shuah
On 2/25/22 1:56 PM, Shuah Khan wrote: > On 2/19/22 12:27 AM, Mateusz Jończyk wrote: >> Some problems with reading the RTC time may happen rarely, for example >> while the RTC is updating. So read the RTC many times to catch these >> problems. For example, a previous attempt for my >> commit ea6fa4961aab ("rtc: mc146818-lib: fix RTC presence check") >> was incorrect and would have triggered this selftest. >> >> To avoid the risk of damaging the hardware, wait 11ms before consecutive >> reads. >> >> In rtc_time_to_timestamp I copied values manually instead of casting - >> just to be on the safe side. The 11ms wait period was chosen so that it is >> not a divisor of 1000ms. >> >> Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> >> Cc: Alessandro Zummo <a.zummo@towertech.it> >> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> >> Cc: Shuah Khan <shuah@kernel.org> >> --- >> >> Also, before >> commit cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time") >> reading the RTC alarm time during RTC update produced incorrect results >> on many Intel platforms. Preparing a similar selftest for this case >> would be more difficult, though, because the RTC alarm time is cached by >> the kernel. Direct access would have to be exposed somehow, for example >> in debugfs. I may prepare a patch for it in the future. >> --- > > Looks good to me. We end up tweaking the timeout=210 in settings every > now and then. Not sure how we can avoid adjusting it as we find problems. > > I will apply this in for Linux 5.18-rc1 > Applied to linux-kselftest next for Linux 5.18-rc1 thanks, -- Shuah
diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c index 66af608fb4c6..2b9d929a24ed 100644 --- a/tools/testing/selftests/rtc/rtctest.c +++ b/tools/testing/selftests/rtc/rtctest.c @@ -20,6 +20,8 @@ #define NUM_UIE 3 #define ALARM_DELTA 3 +#define READ_LOOP_DURATION_SEC 30 +#define READ_LOOP_SLEEP_MS 11 static char *rtc_file = "/dev/rtc0"; @@ -49,6 +51,70 @@ TEST_F(rtc, date_read) { rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec); } +static time_t rtc_time_to_timestamp(struct rtc_time *rtc_time) +{ + struct tm tm_time = { + .tm_sec = rtc_time->tm_sec, + .tm_min = rtc_time->tm_min, + .tm_hour = rtc_time->tm_hour, + .tm_mday = rtc_time->tm_mday, + .tm_mon = rtc_time->tm_mon, + .tm_year = rtc_time->tm_year, + }; + + return mktime(&tm_time); +} + +static void nanosleep_with_retries(long ns) +{ + struct timespec req = { + .tv_sec = 0, + .tv_nsec = ns, + }; + struct timespec rem; + + while (nanosleep(&req, &rem) != 0) { + req.tv_sec = rem.tv_sec; + req.tv_nsec = rem.tv_nsec; + } +} + +TEST_F_TIMEOUT(rtc, date_read_loop, READ_LOOP_DURATION_SEC + 2) { + int rc; + long iter_count = 0; + struct rtc_time rtc_tm; + time_t start_rtc_read, prev_rtc_read; + + TH_LOG("Continuously reading RTC time for %ds (with %dms breaks after every read).", + READ_LOOP_DURATION_SEC, READ_LOOP_SLEEP_MS); + + rc = ioctl(self->fd, RTC_RD_TIME, &rtc_tm); + ASSERT_NE(-1, rc); + start_rtc_read = rtc_time_to_timestamp(&rtc_tm); + prev_rtc_read = start_rtc_read; + + do { + time_t rtc_read; + + rc = ioctl(self->fd, RTC_RD_TIME, &rtc_tm); + ASSERT_NE(-1, rc); + + rtc_read = rtc_time_to_timestamp(&rtc_tm); + /* Time should not go backwards */ + ASSERT_LE(prev_rtc_read, rtc_read); + /* Time should not increase more then 1s at a time */ + ASSERT_GE(prev_rtc_read + 1, rtc_read); + + /* Sleep 11ms to avoid killing / overheating the RTC */ + nanosleep_with_retries(READ_LOOP_SLEEP_MS * 1000000); + + prev_rtc_read = rtc_read; + iter_count++; + } while (prev_rtc_read <= start_rtc_read + READ_LOOP_DURATION_SEC); + + TH_LOG("Performed %ld RTC time reads.", iter_count); +} + TEST_F_TIMEOUT(rtc, uie_read, NUM_UIE + 2) { int i, rc, irq = 0; unsigned long data; diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index a953c96aa16e..0c1a2075d5f3 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=180 +timeout=210
Some problems with reading the RTC time may happen rarely, for example while the RTC is updating. So read the RTC many times to catch these problems. For example, a previous attempt for my commit ea6fa4961aab ("rtc: mc146818-lib: fix RTC presence check") was incorrect and would have triggered this selftest. To avoid the risk of damaging the hardware, wait 11ms before consecutive reads. In rtc_time_to_timestamp I copied values manually instead of casting - just to be on the safe side. The 11ms wait period was chosen so that it is not a divisor of 1000ms. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Shuah Khan <shuah@kernel.org> --- Also, before commit cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time") reading the RTC alarm time during RTC update produced incorrect results on many Intel platforms. Preparing a similar selftest for this case would be more difficult, though, because the RTC alarm time is cached by the kernel. Direct access would have to be exposed somehow, for example in debugfs. I may prepare a patch for it in the future. --- tools/testing/selftests/rtc/rtctest.c | 66 +++++++++++++++++++++++++++ tools/testing/selftests/rtc/settings | 2 +- 2 files changed, 67 insertions(+), 1 deletion(-)