diff mbox series

[RESEND,1/6] rtc-cmos: take rtc_lock while reading from CMOS

Message ID 20211017193927.277409-2-mat.jonczyk@o2.pl
State Superseded
Headers show
Series rtc,x86: CMOS RTC fixes | expand

Commit Message

Mateusz Jończyk Oct. 17, 2021, 7:39 p.m. UTC 
Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with the rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.

Use spin_lock_irq() like the rest of the function.

Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
---
 drivers/rtc/rtc-cmos.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 670fd8a2970e..2cd0fe728ab2 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -463,7 +463,10 @@  static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	min = t->time.tm_min;
 	sec = t->time.tm_sec;
 
+	spin_lock_irq(&rtc_lock);
 	rtc_control = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
 	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
 		/* Writing 0xff means "don't care" or "match all".  */
 		mon = (mon <= 12) ? bin2bcd(mon) : 0xff;