@@ -20,15 +20,12 @@
/*
* This is a special lock that is owned by the CPU and holds the index
* register we are working with. It is required for NMI access to the
- * CMOS/RTC registers. See include/asm-i386/mc146818rtc.h for details.
+ * CMOS/RTC registers. See arch/x86/include/asm/mc146818rtc.h for details.
*/
volatile unsigned long cmos_lock;
EXPORT_SYMBOL(cmos_lock);
#endif /* CONFIG_X86_32 */
-/* For two digit years assume time is always after that */
-#define CMOS_YEARS_OFFS 2000
-
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
@@ -62,8 +59,7 @@ int mach_set_rtc_mmss(const struct timespec64 *now)
void mach_get_cmos_time(struct timespec64 *now)
{
- unsigned int status, year, mon, day, hour, min, sec, century = 0;
- unsigned long flags;
+ struct rtc_time tm;
/*
* If pm_trace abused the RTC as storage, set the timespec to 0,
@@ -74,51 +70,12 @@ void mach_get_cmos_time(struct timespec64 *now)
return;
}
- spin_lock_irqsave(&rtc_lock, flags);
-
- /*
- * If UIP is clear, then we have >= 244 microseconds before
- * RTC registers will be updated. Spec sheet says that this
- * is the reliable way to read RTC - registers. If UIP is set
- * then the register access might be invalid.
- */
- while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
- cpu_relax();
-
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
-
-#ifdef CONFIG_ACPI
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- acpi_gbl_FADT.century)
- century = CMOS_READ(acpi_gbl_FADT.century);
-#endif
-
- status = CMOS_READ(RTC_CONTROL);
- WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
-
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
- sec = bcd2bin(sec);
- min = bcd2bin(min);
- hour = bcd2bin(hour);
- day = bcd2bin(day);
- mon = bcd2bin(mon);
- year = bcd2bin(year);
+ if (!mc146818_get_time(&tm)) {
+ now->tv_sec = now->tv_nsec = 0;
+ return;
}
- if (century) {
- century = bcd2bin(century);
- year += century * 100;
- } else
- year += CMOS_YEARS_OFFS;
-
- now->tv_sec = mktime64(year, mon, day, hour, min, sec);
+ now->tv_sec = rtc_tm_to_time64(&tm);
now->tv_nsec = 0;
}
There are functions in drivers/rtc/rtc-mc146818-lib.c that handle reading from / writing to the CMOS RTC clock. mach_get_cmos_time() in arch/x86/kernel/rtc.c did not use them and was mostly a duplicate of mc146818_get_time(). Modify mach_get_cmos_time() to use mc146818_get_time() and remove the duplicated code. mach_get_cmos_time() used a different algorithm than mc146818_get_time(), but these functions are equivalent. The major differences are: - mc146818_get_time() is better refined: it was updated in commit 05a0302c3548 ("rtc: mc146818: Prevent reading garbage") to take account of various edge conditions, - when the UIP ("Update in progress") bit of the RTC is set, mach_get_cmos_time() was busy waiting with cpu_relax() while mc146818_get_time() is now using udelay(100) in every loop iteration, - mach_get_cmos_time() assumed that the RTC year must be >= 2000, which may not be true on some old boxes with a dead battery. The RTC writing counterpart, mach_set_rtc_mmss() is already using mc146818_get_time() from drivers/rtc. This was done in commit 3195ef59cb42 ("x86: Do full rtc synchronization with ntp") It appears that mach_get_cmos_time() was simply forgotten. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> --- arch/x86/kernel/rtc.c | 55 +++++-------------------------------------- 1 file changed, 6 insertions(+), 49 deletions(-)