Message ID | 20191021080838.2789-1-martin@geanix.com |
---|---|
State | Accepted |
Headers | show |
Series | [PATCHv3] rtc: pcf2127: handle boot-enabled watchdog feature | expand |
Hi, On 21/10/2019 10:08:38+0200, Martin Hundebøll wrote: > Linux should handle when the pcf2127 watchdog feature is enabled by the > bootloader. This is done by checking the watchdog timer value during > init, and set the WDOG_HW_RUNNING flag if the value differs from zero. > > Signed-off-by: Martin Hundebøll <martin@geanix.com> You could have kept Guenter's ack. > --- > > Change since v2: > * remove logging in case of error > > Change since v1: > * remove setting of WDOG_HW_RUNNING in pcf2127_wdt_start() > > drivers/rtc/rtc-pcf2127.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > Applied, thanks.
On Mon, Oct 21, 2019 at 10:08:38AM +0200, Martin Hundebøll wrote: > Linux should handle when the pcf2127 watchdog feature is enabled by the > bootloader. This is done by checking the watchdog timer value during > init, and set the WDOG_HW_RUNNING flag if the value differs from zero. > > Signed-off-by: Martin Hundebøll <martin@geanix.com> Acked-by: Guenter Roeck <linux@roeck-us.net> > --- > > Change since v2: > * remove logging in case of error > > Change since v1: > * remove setting of WDOG_HW_RUNNING in pcf2127_wdt_start() > > drivers/rtc/rtc-pcf2127.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c > index 02b069c..ba5baac 100644 > --- a/drivers/rtc/rtc-pcf2127.c > +++ b/drivers/rtc/rtc-pcf2127.c > @@ -417,6 +417,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, > const char *name, bool has_nvmem) > { > struct pcf2127 *pcf2127; > + u32 wdd_timeout; > int ret = 0; > > dev_dbg(dev, "%s\n", __func__); > @@ -459,7 +460,6 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, > /* > * Watchdog timer enabled and reset pin /RST activated when timed out. > * Select 1Hz clock source for watchdog timer. > - * Timer is not started until WD_VAL is loaded with a valid value. > * Note: Countdown timer disabled and not available. > */ > ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_WD_CTL, > @@ -475,6 +475,14 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, > return ret; > } > > + /* Test if watchdog timer is started by bootloader */ > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout); > + if (ret) > + return ret; > + > + if (wdd_timeout) > + set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status); > + > #ifdef CONFIG_WATCHDOG > ret = devm_watchdog_register_device(dev, &pcf2127->wdd); > if (ret) > -- > 2.7.4 >
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 02b069c..ba5baac 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -417,6 +417,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, const char *name, bool has_nvmem) { struct pcf2127 *pcf2127; + u32 wdd_timeout; int ret = 0; dev_dbg(dev, "%s\n", __func__); @@ -459,7 +460,6 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, /* * Watchdog timer enabled and reset pin /RST activated when timed out. * Select 1Hz clock source for watchdog timer. - * Timer is not started until WD_VAL is loaded with a valid value. * Note: Countdown timer disabled and not available. */ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_WD_CTL, @@ -475,6 +475,14 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, return ret; } + /* Test if watchdog timer is started by bootloader */ + ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout); + if (ret) + return ret; + + if (wdd_timeout) + set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status); + #ifdef CONFIG_WATCHDOG ret = devm_watchdog_register_device(dev, &pcf2127->wdd); if (ret)
Linux should handle when the pcf2127 watchdog feature is enabled by the bootloader. This is done by checking the watchdog timer value during init, and set the WDOG_HW_RUNNING flag if the value differs from zero. Signed-off-by: Martin Hundebøll <martin@geanix.com> --- Change since v2: * remove logging in case of error Change since v1: * remove setting of WDOG_HW_RUNNING in pcf2127_wdt_start() drivers/rtc/rtc-pcf2127.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)