diff mbox

[v5,1/2] Documentation: dt-bindings: trickle charger dt binding document for ds1339

Message ID 20140909143220.GA2164@fi-ourus-dhcp00977.emea.nsn-net.net
State Accepted
Headers show

Commit Message

Matti Vaittinen Sept. 9, 2014, 2:32 p.m. UTC 
Some DS13XX devices have "trickle chargers". Introduce a device tree binding
for the resistor and diode configuration for enabling trickle charger.

Signed-off-by: Matti Vaittinen <matti.vaittinen@nsn.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
---

Delta to v4
    -This is the correct patch.

 .../devicetree/bindings/i2c/trivial-devices.txt        |  1 -
 .../devicetree/bindings/rtc/dallas,ds1339.txt          | 18 ++++++++++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 6af570e..e9206a4 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -35,7 +35,6 @@  catalyst,24c32		i2c serial eeprom
 cirrus,cs42l51		Cirrus Logic CS42L51 audio codec
 dallas,ds1307		64 x 8, Serial, I2C Real-Time Clock
 dallas,ds1338		I2C RTC with 56-Byte NV RAM
-dallas,ds1339		I2C Serial Real-Time Clock
 dallas,ds1340		I2C RTC with Trickle Charger
 dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
 dallas,ds1631		High-Precision Digital Thermometer
diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
new file mode 100644
index 0000000..916f576
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
@@ -0,0 +1,18 @@ 
+* Dallas DS1339		I2C Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "dallas,ds1339".
+- reg: I2C address for chip
+
+Optional properties:
+- trickle-resistor-ohms : Selected resistor for trickle charger
+	Values usable for ds1339 are 250, 2000, 4000
+	Should be given if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode
+	Should be given if internal trickle charger diode should be disabled
+Example:
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		trickle-resistor-ohms = <250>;
+		reg = <0x68>;
+	};