diff mbox

rtc: fix ds1388 time corruption

Message ID 1276767770-22531-1-git-send-email-Joakim.Tjernlund@transmode.se
State Accepted
Headers show

Commit Message

Joakim Tjernlund June 17, 2010, 9:42 a.m. UTC 
The ds1307 driver misreads the ds1388 registers when
checking for 12 or 24 hour mode. Instead of
checking the hour register it reads the minute register.
Therefore the driver thinks minutes >= 40 has the
12HR bit set and resets the minute register by zeroing
the high bits. This results in minutes are reset
to 0-9, jumping back in time 40 or 50 minutes. The
time jump is also written back to the RTC.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
---

This should go to Linus ASAP IMHO.

 drivers/rtc/rtc-ds1307.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index c4ec5c1..a01bbe2 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -775,7 +775,7 @@  static int __devinit ds1307_probe(struct i2c_client *client,
 
 read_rtc:
 	/* read RTC registers */
-	tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf);
+	tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
 	if (tmp != 8) {
 		pr_debug("read error %d\n", tmp);
 		err = -EIO;
@@ -860,7 +860,7 @@  read_rtc:
 		if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
 			tmp += 12;
 		i2c_smbus_write_byte_data(client,
-				DS1307_REG_HOUR,
+				ds1307->offset + DS1307_REG_HOUR,
 				bin2bcd(tmp));
 	}