| Message ID | cover.1617020713.git.matti.vaittinen@fi.rohmeurope.com |
|---|---|
| Headers | show |
| Series | Support ROHM BD71815 PMIC | expand |
On Mon, 2021-03-29 at 15:52 +0300, Matti Vaittinen wrote: > Patch series introducing support for ROHM BD71815 PMIC > > ROHM BD71815 is a power management IC used in some battery powered > systems. It contains regulators, GPO(s), charger + coulomb counter, > RTC > and a clock gate. Lee, Mark, (Linus, Bartosz, all) I think all other parts except the regulator have relevant acks. (Well, I changed GPIO in last version so Bart/Linus may want changes but those will follow to GPIO in near future anyways). Do you think Lee could merge other but the regulator parts to MFD if Mark is busy? I'd like to be able to squeeze the amount of patches and recipients for future iterations. It might be easier to work directly on regulator tree if regulator part gets delayed to next cycle. (I do also plan further working with the GPIO part during 5.13-rc cycle to utilize the regmap_gpio. That could be done in the GPIO tree then). I think the other portions are in a pretty stable shape now. Best Regards Matti Vaittinen
On Tue, Mar 30, 2021 at 11:06:53AM +0000, Vaittinen, Matti wrote: > Do you think Lee could merge other but the regulator parts to MFD if > Mark is busy? I'd like to be able to squeeze the amount of patches and > recipients for future iterations. It might be easier to work directly > on regulator tree if regulator part gets delayed to next cycle. (I do > also plan further working with the GPIO part during 5.13-rc cycle to > utilize the regmap_gpio. That could be done in the GPIO tree then). I > think the other portions are in a pretty stable shape now. This wouldn't be a bad idea in general for these serieses, especially the bigger ones or the ones that get a lot of review comments on some patches. In any case, here's a pull request for the helpers that are added The following changes since commit 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b: Linux 5.12-rc4 (2021-03-21 14:56:43 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-list-ramp-helpers for you to fetch changes up to fb8fee9efdcf084d9e31ba14cc4734d97e5dd972: regulator: Add regmap helper for ramp-delay setting (2021-04-02 18:33:59 +0100) ---------------------------------------------------------------- regulator: Add a new helper and export an existing one For new drivers. ---------------------------------------------------------------- Matti Vaittinen (2): regulator: helpers: Export helper voltage listing regulator: Add regmap helper for ramp-delay setting drivers/regulator/helpers.c | 101 +++++++++++++++++++++++++++++++++++---- include/linux/regulator/driver.h | 7 +++ 2 files changed, 100 insertions(+), 8 deletions(-)
On Mon, 29 Mar 2021 15:52:38 +0300, Matti Vaittinen wrote: > Patch series introducing support for ROHM BD71815 PMIC > > ROHM BD71815 is a power management IC used in some battery powered > systems. It contains regulators, GPO(s), charger + coulomb counter, RTC > and a clock gate. > > All regulators can be controlled via I2C. LDO4 can additionally be set to > be enabled/disabled by a GPIO. LDO3 voltage could be selected from two > voltages written into separate VSEL reisters using GPIO but this mode is > not supported by driver. On top of that the PMIC has the typical HW > state machine which is present also on many other ROHM PMICs. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next Thanks! [10/19] regulator: helpers: Export helper voltage listing commit: e3baacf54275647a018ee35bff3bc775a8a2a01a [13/19] regulator: Add regmap helper for ramp-delay setting commit: fb8fee9efdcf084d9e31ba14cc4734d97e5dd972 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Fri, 2021-04-02 at 20:19 +0100, Mark Brown wrote: > On Tue, Mar 30, 2021 at 11:06:53AM +0000, Vaittinen, Matti wrote: > > > Do you think Lee could merge other but the regulator parts to MFD > > if > > Mark is busy? I'd like to be able to squeeze the amount of patches > > and > > recipients for future iterations. It might be easier to work > > directly > > on regulator tree if regulator part gets delayed to next cycle. (I > > do > > also plan further working with the GPIO part during 5.13-rc cycle > > to > > utilize the regmap_gpio. That could be done in the GPIO tree then). > > I > > think the other portions are in a pretty stable shape now. > > This wouldn't be a bad idea in general for these serieses, especially > the bigger ones or the ones that get a lot of review comments on some > patches. > > In any case, here's a pull request for the helpers that are added Thanks Mark. > Matti Vaittinen (2): > regulator: helpers: Export helper voltage listing > regulator: Add regmap helper for ramp-delay setting > If I understand this correctly, the idea is that Lee could pull these changes to his tree? So, I will drop these two patches from the series when I resend it. Helpers are needed for the regulator part of the series to apply. Lee, Mark, please let me know if I misunderstood. Best Regards Matti Vaittinen
On Mon, Apr 05, 2021 at 05:23:41AM +0000, Vaittinen, Matti wrote: > On Fri, 2021-04-02 at 20:19 +0100, Mark Brown wrote: > > Matti Vaittinen (2): > > regulator: helpers: Export helper voltage listing > > regulator: Add regmap helper for ramp-delay setting > If I understand this correctly, the idea is that Lee could pull these > changes to his tree? So, I will drop these two patches from the series > when I resend it. Helpers are needed for the regulator part of the > series to apply. Lee, Mark, please let me know if I misunderstood. Yes.
Patch series introducing support for ROHM BD71815 PMIC ROHM BD71815 is a power management IC used in some battery powered systems. It contains regulators, GPO(s), charger + coulomb counter, RTC and a clock gate. All regulators can be controlled via I2C. LDO4 can additionally be set to be enabled/disabled by a GPIO. LDO3 voltage could be selected from two voltages written into separate VSEL reisters using GPIO but this mode is not supported by driver. On top of that the PMIC has the typical HW state machine which is present also on many other ROHM PMICs. IC contains two GPOs - but one of the GPOs is marked as GND in data-sheet. Thus the driver by default only exposes one GPO. The second GPO can be enabled by special DT property. RTC is almost similar to what is on BD71828. For currently used features only the register address offset to RTC block differs. The charger driver is not included in this series. ROHM has a charger driver with some fuel-gauging logig written in but this is not included here. I am working on separating the logic from HW specific driver and supporting both BD71815 and BD71828 chargers in separate patch series. Changelog v5: Regulator: - Added regmap helper for regulator ramp-delay and taken it in use (patches 13, 14, 16 - they can be just dropped if ramp-delay helper is not a good idea. Patch 15 implements old-fashioned ramp-delay) GPIO: - styling changes to GPIO (Mostly suggested by Andy) - implemented init_valid_mask (but can't count on it yet) Changelog v4: - Sorted ROHM chip ID enum - Statcized DVS structures in regulator driver - Minor styling for regulator driver - rebased on v5.12-rc4 Changelog v3: - GPIO clean-up as suggested by Bartosz - MFD clean-up as suggested by Lee - clk-mode dt-binding handling in MFD driver corrected to reflect new property values. - Dropped already applied patches - Rebased on v5.12-rc2 Changelog v2: - Rebased on top of v5.11-rc3 - Added another "preliminary patch" which fixes HW-dvs voltage handling (patch 1) - split regulator patch to two. - changed dt-binding patch ordering. regulators: - staticized probe - removed some unnecessary defines - updated comments - split rohm-regulator patch adding SNVS and supporting simple linear mapping into two - one adding support for mapping, other adding SNVS. GPIO: - removed unnecessary headers - clarified dev/parent->dev usage - removed forgotten #define DEBUG dt-bindings: - changed patch order to meet ref-dependencies - added missing regulator nodes - changed string property for clk mode to tristated MFD: - header cleanups. CLK: - fixed commit message -- Matti Vaittinen (19): rtc: bd70528: Do not require parent data mfd: bd718x7: simplify by cleaning unnecessary device data dt_bindings: bd71828: Add clock output mode dt_bindings: regulator: Add ROHM BD71815 PMIC regulators dt_bindings: mfd: Add ROHM BD71815 PMIC mfd: Add ROHM BD71815 ID mfd: Sort ROHM chip ID list for better readability mfd: Support for ROHM BD71815 PMIC core gpio: support ROHM BD71815 GPOs regulator: helpers: Export helper voltage listing regulator: rohm-regulator: linear voltage support regulator: rohm-regulator: Support SNVS HW state. regulator: Add regmap helper for ramp-delay setting regulator: bd718x7, bd71828: Use ramp-delay helper regulator: Support ROHM BD71815 regulators regulator: bd71815: use ramp-delay helper clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC rtc: bd70528: Support RTC on ROHM BD71815 MAINTAINERS: Add ROHM BD71815AGW .../bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++ .../bindings/mfd/rohm,bd71828-pmic.yaml | 6 + .../regulator/rohm,bd71815-regulator.yaml | 116 ++++ MAINTAINERS | 3 + drivers/clk/clk-bd718x7.c | 9 +- drivers/gpio/Kconfig | 10 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-bd71815.c | 193 ++++++ drivers/mfd/Kconfig | 15 +- drivers/mfd/rohm-bd71828.c | 486 +++++++++---- drivers/mfd/rohm-bd718x7.c | 43 +- drivers/regulator/Kconfig | 11 + drivers/regulator/Makefile | 1 + drivers/regulator/bd71815-regulator.c | 651 ++++++++++++++++++ drivers/regulator/bd71828-regulator.c | 51 +- drivers/regulator/bd718x7-regulator.c | 60 +- drivers/regulator/helpers.c | 101 ++- drivers/regulator/rohm-regulator.c | 23 +- drivers/rtc/Kconfig | 6 +- drivers/rtc/rtc-bd70528.c | 104 +-- include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++++ include/linux/mfd/rohm-bd71828.h | 3 + include/linux/mfd/rohm-bd718x7.h | 13 - include/linux/mfd/rohm-generic.h | 15 +- include/linux/regulator/driver.h | 7 + 25 files changed, 2393 insertions(+), 298 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml create mode 100644 drivers/gpio/gpio-bd71815.c create mode 100644 drivers/regulator/bd71815-regulator.c create mode 100644 include/linux/mfd/rohm-bd71815.h base-commit: 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b