From patchwork Mon Feb 22 17:12:41 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sebastian Reichel X-Patchwork-Id: 1443210 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-rtc-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4DkpgQ51wYz9sVt for ; Tue, 23 Feb 2021 04:13:54 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230438AbhBVRNh (ORCPT ); Mon, 22 Feb 2021 12:13:37 -0500 Received: from bhuna.collabora.co.uk ([46.235.227.227]:60058 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230212AbhBVRNh (ORCPT ); Mon, 22 Feb 2021 12:13:37 -0500 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: sre) with ESMTPSA id BB2A91F44325 Received: by jupiter.universe (Postfix, from userid 1000) id 4BBAD4800C3; Mon, 22 Feb 2021 18:12:51 +0100 (CET) From: Sebastian Reichel To: Sebastian Reichel , Philipp Zabel , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team Cc: Rob Herring , Alexandre Belloni , Alessandro Zummo , David Airlie , Daniel Vetter , Miquel Raynal , devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org, linux-mtd@lists.infradead.org, kernel@collabora.com Subject: [PATCHv1 0/6] Support for GE B1x5v2 Date: Mon, 22 Feb 2021 18:12:41 +0100 Message-Id: <20210222171247.97609-1-sebastian.reichel@collabora.com> X-Mailer: git-send-email 2.30.0 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-rtc@vger.kernel.org Hi, This series adds support for another General Electric patient monitor series (similar to existing Bx50v3), which is based on i.MX6DL using Congatec's QMX6 module. The module uses an I2C RTC to provide the i.MX6 32768 Hz clock, so it's important to keep it enabled. Not doing so results in incorrect timings of watchdog and i.MX6 RTC. The bootloader enables the watchdog, so disabling the clock results in system reboot. [0] The second patch is required for B155v2, which uses a 1366x768 G156XTN01 panel. The 1366 width is not supported by the display pipeline and result in boot hanging without the patch. [1] Patches 3+4 are updating DT bindings for the new board compatible values. Patch 5 adds missing sst25vf032b to spi-nor bindings. Checkpatch still complains, since the binding lists all chips without vendor prefix. This probably should be fixed when the files is moved to YAML, but is non-trivial since those chips are manufactured by multiple vendors. E.g. sst25vf032b can be sourced from at least sst and microchip. Finally patch 6 adds the board files. Thanks, [0] There has been a discussion for the problem on the mailinglists last year. The discussion died off, when I told people their ideas don't work. I hope using protected-clocks is fine for this usecase. https://lore.kernel.org/linux-clk/20191108170135.9053-1-sebastian.reichel@collabora.com/ [1] I've sent this before as a separate patch in September, but nobody seemed to care. This adds full context for the problem. https://lore.kernel.org/dri-devel/20200910162831.321556-1-sebastian.reichel@collabora.com/ -- Sebastian Sebastian Reichel (6): rtc: m41t80: add support for protected clock drm/imx: Add 8 pixel alignment fix dt-bindings: vendor-prefixes: add congatec dt-bindings: arm: fsl: add GE B1x5pv2 boards dt-bindings: mtd: jedec,spi-nor: add sst25vf032b ARM: dts: imx6: Add GE B1x5v2 .../devicetree/bindings/arm/fsl.yaml | 11 + .../devicetree/bindings/mtd/jedec,spi-nor.txt | 1 + .../devicetree/bindings/rtc/rtc-m41t80.txt | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 5 + arch/arm/boot/dts/imx6dl-b105pv2.dts | 35 + arch/arm/boot/dts/imx6dl-b105v2.dts | 35 + arch/arm/boot/dts/imx6dl-b125pv2.dts | 33 + arch/arm/boot/dts/imx6dl-b125v2.dts | 33 + arch/arm/boot/dts/imx6dl-b155v2.dts | 36 + arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 434 ++++++++++++ arch/arm/boot/dts/imx6dl-b1x5v2.dtsi | 61 ++ arch/arm/boot/dts/imx6dl-qmx6.dtsi | 623 ++++++++++++++++++ drivers/gpu/drm/imx/imx-drm-core.c | 19 +- drivers/gpu/drm/imx/imx-ldb.c | 5 + drivers/gpu/drm/imx/ipuv3-crtc.c | 11 +- drivers/gpu/drm/imx/ipuv3-plane.c | 19 +- drivers/gpu/ipu-v3/ipu-dc.c | 5 + drivers/gpu/ipu-v3/ipu-di.c | 7 + drivers/rtc/rtc-m41t80.c | 3 + 20 files changed, 1373 insertions(+), 6 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi