@@ -17,8 +17,7 @@ void ppc4xx_l2sram_init(CPUPPCState *env);
void ppc4xx_cpr_init(CPUPPCState *env);
void ppc4xx_sdr_init(CPUPPCState *env);
void ppc440_sdram_init(CPUPPCState *env, int nbanks,
- Ppc4xxSdramBank *ram_banks,
- int do_init);
+ Ppc4xxSdramBank *ram_banks);
void ppc4xx_ahb_init(CPUPPCState *env);
void ppc4xx_dma_init(CPUPPCState *env, int dcr_base);
void ppc460ex_pcie_init(CPUPPCState *env);
@@ -16,6 +16,7 @@
#include "qemu/module.h"
#include "hw/irq.h"
#include "exec/memory.h"
+#include "cpu.h"
#include "hw/ppc/ppc4xx.h"
#include "hw/qdev-properties.h"
#include "hw/pci/pci.h"
@@ -727,12 +728,11 @@ static void sdram_reset(void *opaque)
ppc440_sdram_t *sdram = opaque;
sdram->addr = 0;
- sdram->mcopt2 = SDRAM_DDR2_MCOPT2_DCEN;
+ sdram->mcopt2 = 0;
}
void ppc440_sdram_init(CPUPPCState *env, int nbanks,
- Ppc4xxSdramBank *ram_banks,
- int do_init)
+ Ppc4xxSdramBank *ram_banks)
{
ppc440_sdram_t *sdram;
int i;
@@ -749,9 +749,6 @@ void ppc440_sdram_init(CPUPPCState *env, int nbanks,
sdram, &dcr_read_sdram, &dcr_write_sdram);
ppc_dcr_register(env, SDRAM0_CFGDATA,
sdram, &dcr_read_sdram, &dcr_write_sdram);
- if (do_init) {
- sdram_map_bcr(sdram);
- }
ppc_dcr_register(env, SDRAM_R0BAS,
sdram, &dcr_read_sdram, &dcr_write_sdram);
@@ -773,6 +770,12 @@ void ppc440_sdram_init(CPUPPCState *env, int nbanks,
sdram, &dcr_read_sdram, &dcr_write_sdram);
}
+void ppc440_sdram_enable(CPUPPCState *env)
+{
+ ppc_dcr_write(env->dcr_env, SDRAM0_CFGADDR, 0x21);
+ ppc_dcr_write(env->dcr_env, SDRAM0_CFGDATA, 0x08000000);
+}
+
/*****************************************************************************/
/* PLB to AHB bridge */
enum {
@@ -345,7 +345,9 @@ static void sam460ex_init(MachineState *machine)
ppc4xx_sdram_banks(machine->ram, 1, ram_banks, ppc460ex_sdram_bank_sizes);
/* FIXME: does 460EX have ECC interrupts? */
- ppc440_sdram_init(env, 1, ram_banks, 1);
+ ppc440_sdram_init(env, 1, ram_banks);
+ /* Enable SDRAM memory regions as we may boot without firmware */
+ ppc440_sdram_enable(env);
/* IIC controllers and devices */
dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700,
@@ -37,6 +37,8 @@ typedef struct {
uint32_t bcr;
} Ppc4xxSdramBank;
+void ppc440_sdram_enable(CPUPPCState *env);
+
void ppc4xx_sdram_banks(MemoryRegion *ram, int nr_banks,
Ppc4xxSdramBank ram_banks[],
const ram_addr_t sdram_bank_sizes[]);
Remove the do_init parameter of ppc440_sdram_init and enable SDRAM controller from the board. Firmware does this so it may only be needed when booting with -kernel without firmware but we enable SDRAM unconditionally to preserve previous behaviour. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> --- v5: Add function to enable sdram controller hw/ppc/ppc440.h | 3 +-- hw/ppc/ppc440_uc.c | 15 +++++++++------ hw/ppc/sam460ex.c | 4 +++- include/hw/ppc/ppc4xx.h | 2 ++ 4 files changed, 15 insertions(+), 9 deletions(-)