@@ -28,6 +28,8 @@
#define LM75B_TEST_ID "lm75b-test"
#define LM75B_TEST_PATH "/machine/peripheral/" LM75B_TEST_ID
+#define TMP1075_TEST_ID "tmp1075-test"
+
#define TMP105_CONFIG_POL (1 << 2) /* ALERT active-high when set */
#define TMP105_CONFIG_TM (1 << 1) /* interrupt (thermostat) mode */
#define TMP105_CONFIG_FQ_1 (0 << 3) /* fault queue: 1 consecutive fault */
@@ -419,6 +421,26 @@ static void test_lm75b_shutdown_clears_alert(void *obj, void *data,
g_assert_false(get_irq(0));
}
+/*
+ * The TMP1075 answers a read-only Device ID register and powers up with the
+ * modern reset defaults.
+ */
+static void test_tmp1075_device_id(void *obj, void *data,
+ QGuestAllocator *alloc)
+{
+ QI2CDevice *i2cdev = (QI2CDevice *)obj;
+
+ g_assert_cmphex(i2c_get16(i2cdev, TMP105_REG_CONFIG), ==, 0x00ff);
+ g_assert_cmphex(i2c_get16(i2cdev, TMP105_REG_T_LOW), ==, 0x4b00);
+ g_assert_cmphex(i2c_get16(i2cdev, TMP105_REG_T_HIGH), ==, 0x5000);
+
+ g_assert_cmphex(i2c_get16(i2cdev, TMP105_REG_DIE_ID), ==,
+ TMP1075_DEVICE_ID);
+ i2c_set16(i2cdev, TMP105_REG_DIE_ID, 0x1234);
+ g_assert_cmphex(i2c_get16(i2cdev, TMP105_REG_DIE_ID), ==,
+ TMP1075_DEVICE_ID);
+}
+
static void tmp105_register_nodes(void)
{
QOSGraphEdgeOptions opts = {
@@ -475,5 +497,16 @@ static void tmp105_register_nodes(void)
qos_add_test("limits", "lm75b", test_lm75b_limits, NULL);
qos_add_test("shutdown-clears-alert", "lm75b",
test_lm75b_shutdown_clears_alert, NULL);
+
+ /* TMP1075: 16-bit Config register and a Device ID register. */
+ QOSGraphEdgeOptions tmp1075_opts = {
+ .extra_device_opts = "id=" TMP1075_TEST_ID ",address=0x4d"
+ };
+ add_qi2c_address(&tmp1075_opts, &(QI2CAddress) { 0x4d });
+
+ qos_node_create_driver("tmp1075", i2c_device_create);
+ qos_node_consumes("tmp1075", "i2c-bus", &tmp1075_opts);
+
+ qos_add_test("device-id", "tmp1075", test_tmp1075_device_id, NULL);
}
libqos_init(tmp105_register_nodes);
Add a TMP1075 node and check its power-on Config, limit and Device ID register values, including that the Device ID register is read-only. Signed-off-by: Emmanuel Blot <emmanuel.blot@free.fr> --- tests/qtest/tmp105-test.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)