new file mode 100644
@@ -0,0 +1,115 @@
+/*
+ * QTest testcase for the INA230 current/voltage/power monitor
+ *
+ * Copyright (c) 2026 Meta Platforms, Inc. and affiliates.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "libqos/i2c.h"
+#include "libqos/qgraph.h"
+#include "libqtest-single.h"
+#include "qobject/qdict.h"
+
+#define INA230_TEST_ID "ina230-test"
+#define INA230_TEST_ADDR 0x40
+
+/* Register pointer addresses */
+#define REG_CONFIG 0x00
+#define REG_SHUNT 0x01
+#define REG_BUS 0x02
+#define REG_POWER 0x03
+#define REG_CURRENT 0x04
+#define REG_CALIBRATION 0x05
+#define REG_MASK_ENABLE 0x06
+#define REG_ALERT_LIMIT 0x07
+#define REG_DIE_ID 0xFF
+
+/* Configuration register bits */
+#define CONFIG_POR 0x4127
+#define CONFIG_RST 0x8000
+
+/* Mask/Enable register bits */
+#define ME_LEN 0x0001
+#define ME_APOL 0x0002
+#define ME_OVF 0x0004
+#define ME_CVRF 0x0008
+#define ME_AFF 0x0010
+#define ME_CNVR 0x0400
+#define ME_POL 0x0800
+#define ME_BUL 0x1000
+#define ME_BOL 0x2000
+#define ME_SUL 0x4000
+#define ME_SOL 0x8000
+
+/* Injected-input scaling (datasheet fixed LSBs) */
+#define SHUNT_LSB_NV 2500
+#define BUS_LSB_UV 1250
+
+#define DIE_ID_VAL 0x2310
+
+/* Power-on-reset default values and the Die ID */
+static void test_defaults(void *obj, void *data, QGuestAllocator *alloc)
+{
+ QI2CDevice *dev = (QI2CDevice *)obj;
+
+ g_assert_cmphex(i2c_get16(dev, REG_CONFIG), ==, CONFIG_POR);
+ g_assert_cmphex(i2c_get16(dev, REG_SHUNT), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_BUS), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_POWER), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_CURRENT), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_CALIBRATION), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_MASK_ENABLE), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_ALERT_LIMIT), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_DIE_ID), ==, DIE_ID_VAL);
+}
+
+/* Software reset via the Configuration RST bit */
+static void test_soft_reset(void *obj, void *data, QGuestAllocator *alloc)
+{
+ QI2CDevice *dev = (QI2CDevice *)obj;
+
+ i2c_set16(dev, REG_CALIBRATION, 0x1234);
+ i2c_set16(dev, REG_MASK_ENABLE, ME_SOL);
+ i2c_set16(dev, REG_ALERT_LIMIT, 0x0500);
+
+ g_assert_cmphex(i2c_get16(dev, REG_CALIBRATION), ==, 0x1234);
+ g_assert_cmphex(i2c_get16(dev, REG_ALERT_LIMIT), ==, 0x0500);
+
+ i2c_set16(dev, REG_CONFIG, CONFIG_RST);
+
+ g_assert_cmphex(i2c_get16(dev, REG_CONFIG), ==, CONFIG_POR);
+ g_assert_cmphex(i2c_get16(dev, REG_CALIBRATION), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_MASK_ENABLE), ==, 0x0000);
+ g_assert_cmphex(i2c_get16(dev, REG_ALERT_LIMIT), ==, 0x0000);
+}
+
+/* Every bit except the self-clearing RST is writable and reads back */
+static void test_config_wmask(void *obj, void *data, QGuestAllocator *alloc)
+{
+ QI2CDevice *dev = (QI2CDevice *)obj;
+
+ /* Reserved bits are not forced: the guest value is retained */
+ i2c_set16(dev, REG_CONFIG, 0x0007);
+ g_assert_cmphex(i2c_get16(dev, REG_CONFIG), ==, 0x0007);
+
+ i2c_set16(dev, REG_CONFIG, 0x7FFF);
+ g_assert_cmphex(i2c_get16(dev, REG_CONFIG), ==, 0x7FFF);
+}
+
+static void ina230_register_nodes(void)
+{
+ QOSGraphEdgeOptions opts = {
+ .extra_device_opts = "id=" INA230_TEST_ID ",address=0x40"
+ };
+ add_qi2c_address(&opts, &(QI2CAddress) { INA230_TEST_ADDR });
+
+ qos_node_create_driver("ina230", i2c_device_create);
+ qos_node_consumes("ina230", "i2c-bus", &opts);
+
+ qos_add_test("defaults", "ina230", test_defaults, NULL);
+ qos_add_test("soft-reset", "ina230", test_soft_reset, NULL);
+ qos_add_test("config-wmask", "ina230", test_config_wmask, NULL);
+}
+libqos_init(ina230_register_nodes);
@@ -338,6 +338,7 @@ qos_test_ss.add(
'e1000-test.c',
'eepro100-test.c',
'es1370-test.c',
+ 'ina230-test.c',
'lsm303dlhc-mag-test.c',
'isl_pmbus_vr-test.c',
'max34451-test.c',