diff mbox series

[v3] vfio/pci: migration: Skip config space check for Vendor Specific Information in VSC during restore/load

Message ID 20240322064210.1520394-1-vkale@nvidia.com
State New
Headers show
Series [v3] vfio/pci: migration: Skip config space check for Vendor Specific Information in VSC during restore/load | expand

Commit Message

Vinayak Kale March 22, 2024, 6:42 a.m. UTC
In case of migration, during restore operation, qemu checks config space of the
pci device with the config space in the migration stream captured during save
operation. In case of config space data mismatch, restore operation is failed.

config space check is done in function get_pci_config_device(). By default VSC
(vendor-specific-capability) in config space is checked.

Due to qemu's config space check for VSC, live migration is broken across NVIDIA
vGPU devices in situation where source and destination host driver is different.
In this situation, Vendor Specific Information in VSC varies on the destination
to ensure vGPU feature capabilities exposed to the guest driver are compatible
with destination host.

If a vfio-pci device is migration capable and vfio-pci vendor driver is OK with
volatile Vendor Specific Info in VSC then qemu should exempt config space check
for Vendor Specific Info. It is vendor driver's responsibility to ensure that
VSC is consistent across migration. Here consistency could mean that VSC format
should be same on source and destination, however actual Vendor Specific Info
may not be byte-to-byte identical.

This patch skips the check for Vendor Specific Information in VSC for VFIO-PCI
device by clearing pdev->cmask[] offsets. Config space check is still enforced
for 3 byte VSC header. If cmask[] is not set for an offset, then qemu skips
config space check for that offset.

Signed-off-by: Vinayak Kale <vkale@nvidia.com>
---
Version History
v2->v3:
    - Config space check skipped only for Vendor Specific Info in VSC, check is
      still enforced for 3 byte VSC header.
    - Updated commit description with live migration failure scenario.
v1->v2:
    - Limited scope of change to vfio-pci devices instead of all pci devices.

 hw/vfio/pci.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Alex Williamson March 27, 2024, 5:39 p.m. UTC | #1
On Fri, 22 Mar 2024 12:12:10 +0530
Vinayak Kale <vkale@nvidia.com> wrote:

> In case of migration, during restore operation, qemu checks config space of the
> pci device with the config space in the migration stream captured during save
> operation. In case of config space data mismatch, restore operation is failed.
> 
> config space check is done in function get_pci_config_device(). By default VSC
> (vendor-specific-capability) in config space is checked.
> 
> Due to qemu's config space check for VSC, live migration is broken across NVIDIA
> vGPU devices in situation where source and destination host driver is different.
> In this situation, Vendor Specific Information in VSC varies on the destination
> to ensure vGPU feature capabilities exposed to the guest driver are compatible
> with destination host.
> 
> If a vfio-pci device is migration capable and vfio-pci vendor driver is OK with
> volatile Vendor Specific Info in VSC then qemu should exempt config space check
> for Vendor Specific Info. It is vendor driver's responsibility to ensure that
> VSC is consistent across migration. Here consistency could mean that VSC format
> should be same on source and destination, however actual Vendor Specific Info
> may not be byte-to-byte identical.
> 
> This patch skips the check for Vendor Specific Information in VSC for VFIO-PCI
> device by clearing pdev->cmask[] offsets. Config space check is still enforced
> for 3 byte VSC header. If cmask[] is not set for an offset, then qemu skips
> config space check for that offset.
> 
> Signed-off-by: Vinayak Kale <vkale@nvidia.com>
> ---
> Version History
> v2->v3:
>     - Config space check skipped only for Vendor Specific Info in VSC, check is
>       still enforced for 3 byte VSC header.
>     - Updated commit description with live migration failure scenario.
> v1->v2:
>     - Limited scope of change to vfio-pci devices instead of all pci devices.
> 
>  hw/vfio/pci.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)


Acked-by: Alex Williamson <alex.williamson@redhat.com>

 
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index d7fe06715c..1026cdba18 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -2132,6 +2132,27 @@ static void vfio_check_af_flr(VFIOPCIDevice *vdev, uint8_t pos)
>      }
>  }
>  
> +static int vfio_add_vendor_specific_cap(VFIOPCIDevice *vdev, int pos,
> +                                        uint8_t size, Error **errp)
> +{
> +    PCIDevice *pdev = &vdev->pdev;
> +
> +    pos = pci_add_capability(pdev, PCI_CAP_ID_VNDR, pos, size, errp);
> +    if (pos < 0) {
> +        return pos;
> +    }
> +
> +    /*
> +     * Exempt config space check for Vendor Specific Information during restore/load.
> +     * Config space check is still enforced for 3 byte VSC header.
> +     */
> +    if (size > 3) {
> +        memset(pdev->cmask + pos + 3, 0, size - 3);
> +    }
> +
> +    return pos;
> +}
> +
>  static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
>  {
>      PCIDevice *pdev = &vdev->pdev;
> @@ -2199,6 +2220,9 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
>          vfio_check_af_flr(vdev, pos);
>          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
>          break;
> +    case PCI_CAP_ID_VNDR:
> +        ret = vfio_add_vendor_specific_cap(vdev, pos, size, errp);
> +        break;
>      default:
>          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
>          break;
Michael S. Tsirkin March 27, 2024, 8:11 p.m. UTC | #2
On Wed, Mar 27, 2024 at 11:39:15AM -0600, Alex Williamson wrote:
> On Fri, 22 Mar 2024 12:12:10 +0530
> Vinayak Kale <vkale@nvidia.com> wrote:
> 
> > In case of migration, during restore operation, qemu checks config space of the
> > pci device with the config space in the migration stream captured during save
> > operation. In case of config space data mismatch, restore operation is failed.
> > 
> > config space check is done in function get_pci_config_device(). By default VSC
> > (vendor-specific-capability) in config space is checked.
> > 
> > Due to qemu's config space check for VSC, live migration is broken across NVIDIA
> > vGPU devices in situation where source and destination host driver is different.
> > In this situation, Vendor Specific Information in VSC varies on the destination
> > to ensure vGPU feature capabilities exposed to the guest driver are compatible
> > with destination host.
> > 
> > If a vfio-pci device is migration capable and vfio-pci vendor driver is OK with
> > volatile Vendor Specific Info in VSC then qemu should exempt config space check
> > for Vendor Specific Info. It is vendor driver's responsibility to ensure that
> > VSC is consistent across migration. Here consistency could mean that VSC format
> > should be same on source and destination, however actual Vendor Specific Info
> > may not be byte-to-byte identical.
> > 
> > This patch skips the check for Vendor Specific Information in VSC for VFIO-PCI
> > device by clearing pdev->cmask[] offsets. Config space check is still enforced
> > for 3 byte VSC header. If cmask[] is not set for an offset, then qemu skips
> > config space check for that offset.
> > 
> > Signed-off-by: Vinayak Kale <vkale@nvidia.com>
> > ---
> > Version History
> > v2->v3:
> >     - Config space check skipped only for Vendor Specific Info in VSC, check is
> >       still enforced for 3 byte VSC header.
> >     - Updated commit description with live migration failure scenario.
> > v1->v2:
> >     - Limited scope of change to vfio-pci devices instead of all pci devices.
> > 
> >  hw/vfio/pci.c | 24 ++++++++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> 
> 
> Acked-by: Alex Williamson <alex.williamson@redhat.com>


A very reasonable way to do it.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>

Merge through the VFIO tree I presume?


>  
> > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > index d7fe06715c..1026cdba18 100644
> > --- a/hw/vfio/pci.c
> > +++ b/hw/vfio/pci.c
> > @@ -2132,6 +2132,27 @@ static void vfio_check_af_flr(VFIOPCIDevice *vdev, uint8_t pos)
> >      }
> >  }
> >  
> > +static int vfio_add_vendor_specific_cap(VFIOPCIDevice *vdev, int pos,
> > +                                        uint8_t size, Error **errp)
> > +{
> > +    PCIDevice *pdev = &vdev->pdev;
> > +
> > +    pos = pci_add_capability(pdev, PCI_CAP_ID_VNDR, pos, size, errp);
> > +    if (pos < 0) {
> > +        return pos;
> > +    }
> > +
> > +    /*
> > +     * Exempt config space check for Vendor Specific Information during restore/load.
> > +     * Config space check is still enforced for 3 byte VSC header.
> > +     */
> > +    if (size > 3) {
> > +        memset(pdev->cmask + pos + 3, 0, size - 3);
> > +    }
> > +
> > +    return pos;
> > +}
> > +
> >  static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
> >  {
> >      PCIDevice *pdev = &vdev->pdev;
> > @@ -2199,6 +2220,9 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
> >          vfio_check_af_flr(vdev, pos);
> >          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
> >          break;
> > +    case PCI_CAP_ID_VNDR:
> > +        ret = vfio_add_vendor_specific_cap(vdev, pos, size, errp);
> > +        break;
> >      default:
> >          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
> >          break;
Alex Williamson March 27, 2024, 8:52 p.m. UTC | #3
On Wed, 27 Mar 2024 16:11:37 -0400
"Michael S. Tsirkin" <mst@redhat.com> wrote:

> On Wed, Mar 27, 2024 at 11:39:15AM -0600, Alex Williamson wrote:
> > On Fri, 22 Mar 2024 12:12:10 +0530
> > Vinayak Kale <vkale@nvidia.com> wrote:
> >   
> > > In case of migration, during restore operation, qemu checks config space of the
> > > pci device with the config space in the migration stream captured during save
> > > operation. In case of config space data mismatch, restore operation is failed.
> > > 
> > > config space check is done in function get_pci_config_device(). By default VSC
> > > (vendor-specific-capability) in config space is checked.
> > > 
> > > Due to qemu's config space check for VSC, live migration is broken across NVIDIA
> > > vGPU devices in situation where source and destination host driver is different.
> > > In this situation, Vendor Specific Information in VSC varies on the destination
> > > to ensure vGPU feature capabilities exposed to the guest driver are compatible
> > > with destination host.
> > > 
> > > If a vfio-pci device is migration capable and vfio-pci vendor driver is OK with
> > > volatile Vendor Specific Info in VSC then qemu should exempt config space check
> > > for Vendor Specific Info. It is vendor driver's responsibility to ensure that
> > > VSC is consistent across migration. Here consistency could mean that VSC format
> > > should be same on source and destination, however actual Vendor Specific Info
> > > may not be byte-to-byte identical.
> > > 
> > > This patch skips the check for Vendor Specific Information in VSC for VFIO-PCI
> > > device by clearing pdev->cmask[] offsets. Config space check is still enforced
> > > for 3 byte VSC header. If cmask[] is not set for an offset, then qemu skips
> > > config space check for that offset.
> > > 
> > > Signed-off-by: Vinayak Kale <vkale@nvidia.com>
> > > ---
> > > Version History
> > > v2->v3:
> > >     - Config space check skipped only for Vendor Specific Info in VSC, check is
> > >       still enforced for 3 byte VSC header.
> > >     - Updated commit description with live migration failure scenario.
> > > v1->v2:
> > >     - Limited scope of change to vfio-pci devices instead of all pci devices.
> > > 
> > >  hw/vfio/pci.c | 24 ++++++++++++++++++++++++
> > >  1 file changed, 24 insertions(+)  
> > 
> > 
> > Acked-by: Alex Williamson <alex.williamson@redhat.com>  
> 
> 
> A very reasonable way to do it.
> 
> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> 
> Merge through the VFIO tree I presume?

Yep, Cédric said he´d grab it for 9.1.  Thanks,

Alex
 
> > > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > > index d7fe06715c..1026cdba18 100644
> > > --- a/hw/vfio/pci.c
> > > +++ b/hw/vfio/pci.c
> > > @@ -2132,6 +2132,27 @@ static void vfio_check_af_flr(VFIOPCIDevice *vdev, uint8_t pos)
> > >      }
> > >  }
> > >  
> > > +static int vfio_add_vendor_specific_cap(VFIOPCIDevice *vdev, int pos,
> > > +                                        uint8_t size, Error **errp)
> > > +{
> > > +    PCIDevice *pdev = &vdev->pdev;
> > > +
> > > +    pos = pci_add_capability(pdev, PCI_CAP_ID_VNDR, pos, size, errp);
> > > +    if (pos < 0) {
> > > +        return pos;
> > > +    }
> > > +
> > > +    /*
> > > +     * Exempt config space check for Vendor Specific Information during restore/load.
> > > +     * Config space check is still enforced for 3 byte VSC header.
> > > +     */
> > > +    if (size > 3) {
> > > +        memset(pdev->cmask + pos + 3, 0, size - 3);
> > > +    }
> > > +
> > > +    return pos;
> > > +}
> > > +
> > >  static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
> > >  {
> > >      PCIDevice *pdev = &vdev->pdev;
> > > @@ -2199,6 +2220,9 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
> > >          vfio_check_af_flr(vdev, pos);
> > >          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
> > >          break;
> > > +    case PCI_CAP_ID_VNDR:
> > > +        ret = vfio_add_vendor_specific_cap(vdev, pos, size, errp);
> > > +        break;
> > >      default:
> > >          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
> > >          break;  
>
Cédric Le Goater March 28, 2024, 9:30 a.m. UTC | #4
On 3/27/24 21:52, Alex Williamson wrote:
> On Wed, 27 Mar 2024 16:11:37 -0400
> "Michael S. Tsirkin" <mst@redhat.com> wrote:
> 
>> On Wed, Mar 27, 2024 at 11:39:15AM -0600, Alex Williamson wrote:
>>> On Fri, 22 Mar 2024 12:12:10 +0530
>>> Vinayak Kale <vkale@nvidia.com> wrote:
>>>    
>>>> In case of migration, during restore operation, qemu checks config space of the
>>>> pci device with the config space in the migration stream captured during save
>>>> operation. In case of config space data mismatch, restore operation is failed.
>>>>
>>>> config space check is done in function get_pci_config_device(). By default VSC
>>>> (vendor-specific-capability) in config space is checked.
>>>>
>>>> Due to qemu's config space check for VSC, live migration is broken across NVIDIA
>>>> vGPU devices in situation where source and destination host driver is different.
>>>> In this situation, Vendor Specific Information in VSC varies on the destination
>>>> to ensure vGPU feature capabilities exposed to the guest driver are compatible
>>>> with destination host.
>>>>
>>>> If a vfio-pci device is migration capable and vfio-pci vendor driver is OK with
>>>> volatile Vendor Specific Info in VSC then qemu should exempt config space check
>>>> for Vendor Specific Info. It is vendor driver's responsibility to ensure that
>>>> VSC is consistent across migration. Here consistency could mean that VSC format
>>>> should be same on source and destination, however actual Vendor Specific Info
>>>> may not be byte-to-byte identical.
>>>>
>>>> This patch skips the check for Vendor Specific Information in VSC for VFIO-PCI
>>>> device by clearing pdev->cmask[] offsets. Config space check is still enforced
>>>> for 3 byte VSC header. If cmask[] is not set for an offset, then qemu skips
>>>> config space check for that offset.
>>>>
>>>> Signed-off-by: Vinayak Kale <vkale@nvidia.com>
>>>> ---
>>>> Version History
>>>> v2->v3:
>>>>      - Config space check skipped only for Vendor Specific Info in VSC, check is
>>>>        still enforced for 3 byte VSC header.
>>>>      - Updated commit description with live migration failure scenario.
>>>> v1->v2:
>>>>      - Limited scope of change to vfio-pci devices instead of all pci devices.
>>>>
>>>>   hw/vfio/pci.c | 24 ++++++++++++++++++++++++
>>>>   1 file changed, 24 insertions(+)
>>>
>>>
>>> Acked-by: Alex Williamson <alex.williamson@redhat.com>
>>
>>
>> A very reasonable way to do it.
>>
>> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
>>
>> Merge through the VFIO tree I presume?
> 
> Yep, Cédric said he´d grab it for 9.1.  Thanks,


Applied to vfio-next.

Thanks,

C.
diff mbox series

Patch

diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index d7fe06715c..1026cdba18 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2132,6 +2132,27 @@  static void vfio_check_af_flr(VFIOPCIDevice *vdev, uint8_t pos)
     }
 }
 
+static int vfio_add_vendor_specific_cap(VFIOPCIDevice *vdev, int pos,
+                                        uint8_t size, Error **errp)
+{
+    PCIDevice *pdev = &vdev->pdev;
+
+    pos = pci_add_capability(pdev, PCI_CAP_ID_VNDR, pos, size, errp);
+    if (pos < 0) {
+        return pos;
+    }
+
+    /*
+     * Exempt config space check for Vendor Specific Information during restore/load.
+     * Config space check is still enforced for 3 byte VSC header.
+     */
+    if (size > 3) {
+        memset(pdev->cmask + pos + 3, 0, size - 3);
+    }
+
+    return pos;
+}
+
 static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
 {
     PCIDevice *pdev = &vdev->pdev;
@@ -2199,6 +2220,9 @@  static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
         vfio_check_af_flr(vdev, pos);
         ret = pci_add_capability(pdev, cap_id, pos, size, errp);
         break;
+    case PCI_CAP_ID_VNDR:
+        ret = vfio_add_vendor_specific_cap(vdev, pos, size, errp);
+        break;
     default:
         ret = pci_add_capability(pdev, cap_id, pos, size, errp);
         break;