diff mbox series

[70/88] esp.c: ensure that STAT_INT is cleared when reading ESP_RINTR

Message ID 20240112125420.514425-71-mark.cave-ayland@ilande.co.uk
State New
Headers show
Series esp: rework ESP emulation to use a SCSI phase-based state machine | expand

Commit Message

Mark Cave-Ayland Jan. 12, 2024, 12:54 p.m. UTC
Both esp_raise_irq() and esp_lower_irq() check the STAT_INT bit in ESP_RSTAT
to ensure that the IRQ is raised or lowered if its state changes. When reading
ESP_RINTR, esp_lower_irq() was being called *after* ESP_RSTAT had been
cleared meaning that STAT_INT was already clear, and so if STAT_INT was
asserted beforehand then the esp_lower_irq() would have no effect.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/scsi/esp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 6c62417985..604fb9235d 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -1127,6 +1127,7 @@  uint64_t esp_reg_read(ESPState *s, uint32_t saddr)
          */
         val = s->rregs[ESP_RINTR];
         s->rregs[ESP_RINTR] = 0;
+        esp_lower_irq(s);
         s->rregs[ESP_RSTAT] &= ~STAT_TC;
         /*
          * According to the datasheet ESP_RSEQ should be cleared, but as the
@@ -1137,7 +1138,6 @@  uint64_t esp_reg_read(ESPState *s, uint32_t saddr)
          *
          * s->rregs[ESP_RSEQ] = SEQ_0;
          */
-        esp_lower_irq(s);
         break;
     case ESP_TCHI:
         /* Return the unique id if the value has never been written */