diff mbox series

[PULL,03/38] migration: Allow user to specify available switchover bandwidth

Message ID 20231017083003.15951-4-quintela@redhat.com
State New
Headers show
Series [PULL,01/38] migration: refactor migration_completion | expand

Commit Message

Juan Quintela Oct. 17, 2023, 8:29 a.m. UTC
From: Peter Xu <peterx@redhat.com>

Migration bandwidth is a very important value to live migration.  It's
because it's one of the major factors that we'll make decision on when to
switchover to destination in a precopy process.

This value is currently estimated by QEMU during the whole live migration
process by monitoring how fast we were sending the data.  This can be the
most accurate bandwidth if in the ideal world, where we're always feeding
unlimited data to the migration channel, and then it'll be limited to the
bandwidth that is available.

However in reality it may be very different, e.g., over a 10Gbps network we
can see query-migrate showing migration bandwidth of only a few tens of
MB/s just because there are plenty of other things the migration thread
might be doing.  For example, the migration thread can be busy scanning
zero pages, or it can be fetching dirty bitmap from other external dirty
sources (like vhost or KVM).  It means we may not be pushing data as much
as possible to migration channel, so the bandwidth estimated from "how many
data we sent in the channel" can be dramatically inaccurate sometimes.

With that, the decision to switchover will be affected, by assuming that we
may not be able to switchover at all with such a low bandwidth, but in
reality we can.

The migration may not even converge at all with the downtime specified,
with that wrong estimation of bandwidth, keeping iterations forever with a
low estimation of bandwidth.

The issue is QEMU itself may not be able to avoid those uncertainties on
measuing the real "available migration bandwidth".  At least not something
I can think of so far.

One way to fix this is when the user is fully aware of the available
bandwidth, then we can allow the user to help providing an accurate value.

For example, if the user has a dedicated channel of 10Gbps for migration
for this specific VM, the user can specify this bandwidth so QEMU can
always do the calculation based on this fact, trusting the user as long as
specified.  It may not be the exact bandwidth when switching over (in which
case qemu will push migration data as fast as possible), but much better
than QEMU trying to wildly guess, especially when very wrong.

A new parameter "avail-switchover-bandwidth" is introduced just for this.
So when the user specified this parameter, instead of trusting the
estimated value from QEMU itself (based on the QEMUFile send speed), it
trusts the user more by using this value to decide when to switchover,
assuming that we'll have such bandwidth available then.

Note that specifying this value will not throttle the bandwidth for
switchover yet, so QEMU will always use the full bandwidth possible for
sending switchover data, assuming that should always be the most important
way to use the network at that time.

This can resolve issues like "unconvergence migration" which is caused by
hilarious low "migration bandwidth" detected for whatever reason.

Reported-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231010221922.40638-1-peterx@redhat.com>
---
 qapi/migration.json            | 34 +++++++++++++++++++++++++++++++++-
 migration/migration.h          |  2 +-
 migration/options.h            |  1 +
 migration/migration-hmp-cmds.c | 14 ++++++++++++++
 migration/migration.c          | 24 +++++++++++++++++++++---
 migration/options.c            | 28 ++++++++++++++++++++++++++++
 migration/trace-events         |  2 +-
 7 files changed, 99 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/qapi/migration.json b/qapi/migration.json
index d7dfaa5db9..360e609f66 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -758,6 +758,16 @@ 
 # @max-bandwidth: to set maximum speed for migration.  maximum speed
 #     in bytes per second.  (Since 2.8)
 #
+# @avail-switchover-bandwidth: to set the available bandwidth that
+#     migration can use during switchover phase.  NOTE!  This does not
+#     limit the bandwidth during switchover, but only for calculations when
+#     making decisions to switchover.  By default, this value is zero,
+#     which means QEMU will estimate the bandwidth automatically.  This can
+#     be set when the estimated value is not accurate, while the user is
+#     able to guarantee such bandwidth is available when switching over.
+#     When specified correctly, this can make the switchover decision much
+#     more accurate.  (Since 8.2)
+#
 # @downtime-limit: set maximum tolerated downtime for migration.
 #     maximum downtime in milliseconds (Since 2.8)
 #
@@ -839,7 +849,7 @@ 
            'cpu-throttle-initial', 'cpu-throttle-increment',
            'cpu-throttle-tailslow',
            'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth',
-           'downtime-limit',
+           'avail-switchover-bandwidth', 'downtime-limit',
            { 'name': 'x-checkpoint-delay', 'features': [ 'unstable' ] },
            'block-incremental',
            'multifd-channels',
@@ -924,6 +934,16 @@ 
 # @max-bandwidth: to set maximum speed for migration.  maximum speed
 #     in bytes per second.  (Since 2.8)
 #
+# @avail-switchover-bandwidth: to set the available bandwidth that
+#     migration can use during switchover phase.  NOTE!  This does not
+#     limit the bandwidth during switchover, but only for calculations when
+#     making decisions to switchover.  By default, this value is zero,
+#     which means QEMU will estimate the bandwidth automatically.  This can
+#     be set when the estimated value is not accurate, while the user is
+#     able to guarantee such bandwidth is available when switching over.
+#     When specified correctly, this can make the switchover decision much
+#     more accurate.  (Since 8.2)
+#
 # @downtime-limit: set maximum tolerated downtime for migration.
 #     maximum downtime in milliseconds (Since 2.8)
 #
@@ -1017,6 +1037,7 @@ 
             '*tls-hostname': 'StrOrNull',
             '*tls-authz': 'StrOrNull',
             '*max-bandwidth': 'size',
+            '*avail-switchover-bandwidth': 'size',
             '*downtime-limit': 'uint64',
             '*x-checkpoint-delay': { 'type': 'uint32',
                                      'features': [ 'unstable' ] },
@@ -1127,6 +1148,16 @@ 
 # @max-bandwidth: to set maximum speed for migration.  maximum speed
 #     in bytes per second.  (Since 2.8)
 #
+# @avail-switchover-bandwidth: to set the available bandwidth that
+#     migration can use during switchover phase.  NOTE!  This does not
+#     limit the bandwidth during switchover, but only for calculations when
+#     making decisions to switchover.  By default, this value is zero,
+#     which means QEMU will estimate the bandwidth automatically.  This can
+#     be set when the estimated value is not accurate, while the user is
+#     able to guarantee such bandwidth is available when switching over.
+#     When specified correctly, this can make the switchover decision much
+#     more accurate.  (Since 8.2)
+#
 # @downtime-limit: set maximum tolerated downtime for migration.
 #     maximum downtime in milliseconds (Since 2.8)
 #
@@ -1217,6 +1248,7 @@ 
             '*tls-hostname': 'str',
             '*tls-authz': 'str',
             '*max-bandwidth': 'size',
+            '*avail-switchover-bandwidth': 'size',
             '*downtime-limit': 'uint64',
             '*x-checkpoint-delay': { 'type': 'uint32',
                                      'features': [ 'unstable' ] },
diff --git a/migration/migration.h b/migration/migration.h
index cd5534337c..974897a8d0 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -294,7 +294,7 @@  struct MigrationState {
     /*
      * The final stage happens when the remaining data is smaller than
      * this threshold; it's calculated from the requested downtime and
-     * measured bandwidth
+     * measured bandwidth, or avail-switchover-bandwidth if specified.
      */
     int64_t threshold_size;
 
diff --git a/migration/options.h b/migration/options.h
index 045e2a41a2..93ee938ab8 100644
--- a/migration/options.h
+++ b/migration/options.h
@@ -80,6 +80,7 @@  int migrate_decompress_threads(void);
 uint64_t migrate_downtime_limit(void);
 uint8_t migrate_max_cpu_throttle(void);
 uint64_t migrate_max_bandwidth(void);
+uint64_t migrate_avail_switchover_bandwidth(void);
 uint64_t migrate_max_postcopy_bandwidth(void);
 int migrate_multifd_channels(void);
 MultiFDCompression migrate_multifd_compression(void);
diff --git a/migration/migration-hmp-cmds.c b/migration/migration-hmp-cmds.c
index 5b25ba24f7..d206700a43 100644
--- a/migration/migration-hmp-cmds.c
+++ b/migration/migration-hmp-cmds.c
@@ -321,6 +321,10 @@  void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
         monitor_printf(mon, "%s: %" PRIu64 " bytes/second\n",
             MigrationParameter_str(MIGRATION_PARAMETER_MAX_BANDWIDTH),
             params->max_bandwidth);
+        assert(params->has_avail_switchover_bandwidth);
+        monitor_printf(mon, "%s: %" PRIu64 " bytes/second\n",
+            MigrationParameter_str(MIGRATION_PARAMETER_AVAIL_SWITCHOVER_BANDWIDTH),
+            params->avail_switchover_bandwidth);
         assert(params->has_downtime_limit);
         monitor_printf(mon, "%s: %" PRIu64 " ms\n",
             MigrationParameter_str(MIGRATION_PARAMETER_DOWNTIME_LIMIT),
@@ -574,6 +578,16 @@  void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
         }
         p->max_bandwidth = valuebw;
         break;
+    case MIGRATION_PARAMETER_AVAIL_SWITCHOVER_BANDWIDTH:
+        p->has_avail_switchover_bandwidth = true;
+        ret = qemu_strtosz_MiB(valuestr, NULL, &valuebw);
+        if (ret < 0 || valuebw > INT64_MAX
+            || (size_t)valuebw != valuebw) {
+            error_setg(&err, "Invalid size %s", valuestr);
+            break;
+        }
+        p->avail_switchover_bandwidth = valuebw;
+        break;
     case MIGRATION_PARAMETER_DOWNTIME_LIMIT:
         p->has_downtime_limit = true;
         visit_type_size(v, param, &p->downtime_limit, &err);
diff --git a/migration/migration.c b/migration/migration.c
index 0e1002d017..ed04ca3b1c 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -2710,17 +2710,33 @@  static void migration_update_counters(MigrationState *s,
 {
     uint64_t transferred, transferred_pages, time_spent;
     uint64_t current_bytes; /* bytes transferred since the beginning */
+    uint64_t switchover_bw;
+    /* Expected bandwidth when switching over to destination QEMU */
+    double expected_bw_per_ms;
     double bandwidth;
 
     if (current_time < s->iteration_start_time + BUFFER_DELAY) {
         return;
     }
 
+    switchover_bw = migrate_avail_switchover_bandwidth();
     current_bytes = migration_transferred_bytes(s->to_dst_file);
     transferred = current_bytes - s->iteration_initial_bytes;
     time_spent = current_time - s->iteration_start_time;
     bandwidth = (double)transferred / time_spent;
-    s->threshold_size = bandwidth * migrate_downtime_limit();
+
+    if (switchover_bw) {
+        /*
+         * If the user specified a switchover bandwidth, let's trust the
+         * user so that can be more accurate than what we estimated.
+         */
+        expected_bw_per_ms = switchover_bw / 1000;
+    } else {
+        /* If the user doesn't specify bandwidth, we use the estimated */
+        expected_bw_per_ms = bandwidth;
+    }
+
+    s->threshold_size = expected_bw_per_ms * migrate_downtime_limit();
 
     s->mbps = (((double) transferred * 8.0) /
                ((double) time_spent / 1000.0)) / 1000.0 / 1000.0;
@@ -2737,7 +2753,7 @@  static void migration_update_counters(MigrationState *s,
     if (stat64_get(&mig_stats.dirty_pages_rate) &&
         transferred > 10000) {
         s->expected_downtime =
-            stat64_get(&mig_stats.dirty_bytes_last_sync) / bandwidth;
+            stat64_get(&mig_stats.dirty_bytes_last_sync) / expected_bw_per_ms;
     }
 
     migration_rate_reset(s->to_dst_file);
@@ -2745,7 +2761,9 @@  static void migration_update_counters(MigrationState *s,
     update_iteration_initial_status(s);
 
     trace_migrate_transferred(transferred, time_spent,
-                              bandwidth, s->threshold_size);
+                              /* Both in unit bytes/ms */
+                              bandwidth, switchover_bw / 1000,
+                              s->threshold_size);
 }
 
 static bool migration_can_switchover(MigrationState *s)
diff --git a/migration/options.c b/migration/options.c
index 6bbfd4853d..546cbe3106 100644
--- a/migration/options.c
+++ b/migration/options.c
@@ -125,6 +125,8 @@  Property migration_properties[] = {
                       parameters.cpu_throttle_tailslow, false),
     DEFINE_PROP_SIZE("x-max-bandwidth", MigrationState,
                       parameters.max_bandwidth, MAX_THROTTLE),
+    DEFINE_PROP_SIZE("avail-switchover-bandwidth", MigrationState,
+                      parameters.avail_switchover_bandwidth, 0),
     DEFINE_PROP_UINT64("x-downtime-limit", MigrationState,
                       parameters.downtime_limit,
                       DEFAULT_MIGRATE_SET_DOWNTIME),
@@ -780,6 +782,13 @@  uint64_t migrate_max_bandwidth(void)
     return s->parameters.max_bandwidth;
 }
 
+uint64_t migrate_avail_switchover_bandwidth(void)
+{
+    MigrationState *s = migrate_get_current();
+
+    return s->parameters.avail_switchover_bandwidth;
+}
+
 uint64_t migrate_max_postcopy_bandwidth(void)
 {
     MigrationState *s = migrate_get_current();
@@ -917,6 +926,8 @@  MigrationParameters *qmp_query_migrate_parameters(Error **errp)
                                  s->parameters.tls_authz : "");
     params->has_max_bandwidth = true;
     params->max_bandwidth = s->parameters.max_bandwidth;
+    params->has_avail_switchover_bandwidth = true;
+    params->avail_switchover_bandwidth = s->parameters.avail_switchover_bandwidth;
     params->has_downtime_limit = true;
     params->downtime_limit = s->parameters.downtime_limit;
     params->has_x_checkpoint_delay = true;
@@ -1056,6 +1067,15 @@  bool migrate_params_check(MigrationParameters *params, Error **errp)
         return false;
     }
 
+    if (params->has_avail_switchover_bandwidth &&
+        (params->avail_switchover_bandwidth > SIZE_MAX)) {
+        error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
+                   "avail_switchover_bandwidth",
+                   "an integer in the range of 0 to "stringify(SIZE_MAX)
+                   " bytes/second");
+        return false;
+    }
+
     if (params->has_downtime_limit &&
         (params->downtime_limit > MAX_MIGRATE_DOWNTIME)) {
         error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
@@ -1225,6 +1245,10 @@  static void migrate_params_test_apply(MigrateSetParameters *params,
         dest->max_bandwidth = params->max_bandwidth;
     }
 
+    if (params->has_avail_switchover_bandwidth) {
+        dest->avail_switchover_bandwidth = params->avail_switchover_bandwidth;
+    }
+
     if (params->has_downtime_limit) {
         dest->downtime_limit = params->downtime_limit;
     }
@@ -1341,6 +1365,10 @@  static void migrate_params_apply(MigrateSetParameters *params, Error **errp)
         }
     }
 
+    if (params->has_avail_switchover_bandwidth) {
+        s->parameters.avail_switchover_bandwidth = params->avail_switchover_bandwidth;
+    }
+
     if (params->has_downtime_limit) {
         s->parameters.downtime_limit = params->downtime_limit;
     }
diff --git a/migration/trace-events b/migration/trace-events
index ee9c8f4d63..d8c2aa846d 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -186,7 +186,7 @@  source_return_path_thread_shut(uint32_t val) "0x%x"
 source_return_path_thread_resume_ack(uint32_t v) "%"PRIu32
 source_return_path_thread_switchover_acked(void) ""
 migration_thread_low_pending(uint64_t pending) "%" PRIu64
-migrate_transferred(uint64_t transferred, uint64_t time_spent, uint64_t bandwidth, uint64_t size) "transferred %" PRIu64 " time_spent %" PRIu64 " bandwidth %" PRIu64 " max_size %" PRId64
+migrate_transferred(uint64_t transferred, uint64_t time_spent, uint64_t bandwidth, uint64_t avail_bw, uint64_t size) "transferred %" PRIu64 " time_spent %" PRIu64 " bandwidth %" PRIu64 " switchover_bw %" PRIu64 " max_size %" PRId64
 process_incoming_migration_co_end(int ret, int ps) "ret=%d postcopy-state=%d"
 process_incoming_migration_co_postcopy_end_main(void) ""
 postcopy_preempt_enabled(bool value) "%d"