@@ -313,5 +313,5 @@ build_prepend_package_length(GArray *package, unsigned length, bool incl_self)
* PkgLength is the length of the inclusive length of the data
* and PkgLength's length itself when used for terms with
- * explitit length.
+ * explicit length.
*/
length += length_bytes;
@@ -681,5 +681,5 @@ Aml *aml_store(Aml *val, Aml *target)
* pattern.
*
- * Returns: The newly allocated and composed according to patter Aml object.
+ * Returns: The newly allocated and composed according to pattern Aml object.
*/
static Aml *
@@ -2160,5 +2160,5 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
build_append_int_noprefix(tbl, f->minor_ver, 1);
} else {
- build_append_int_noprefix(tbl, 0, 3); /* Reserved upto ACPI 5.0 */
+ build_append_int_noprefix(tbl, 0, 3); /* Reserved up to ACPI 5.0 */
}
build_append_int_noprefix(tbl, 0, 8); /* X_FIRMWARE_CTRL */
@@ -83,5 +83,5 @@ static void build_hmat_lb(GArray *table_data, HMAT_LB_Info *hmat_lb,
/* Length in bytes for entire structure */
uint32_t lb_length
- = 32 /* Table length upto and including Entry Base Unit */
+ = 32 /* Table length up to and including Entry Base Unit */
+ 4 * num_initiator /* Initiator Proximity Domain List */
+ 4 * num_target /* Target Proximity Domain List */
@@ -1098,5 +1098,5 @@ static void nvdimm_build_common_dsm(Aml *dev,
* DSDT tables revision number. If revision number is < 2, integer
* size is 32 bits, otherwise it is 64 bits.
- * Because of this CreateField() canot be used if RLEN < Integer Size.
+ * Because of this CreateField() cannot be used if RLEN < Integer Size.
*
* Also please note that APCI ASL operator SizeOf() doesn't support
@@ -51,5 +51,5 @@ struct partition {
} QEMU_PACKED;
-/* try to guess the disk logical geometry from the MSDOS partition table.
+/* try to guess the disk logical geometry from the MS-DOS partition table.
Return 0 if OK, -1 if could not guess */
static int guess_disk_lchs(BlockBackend *blk,
@@ -67,5 +67,5 @@ static int guess_disk_lchs(BlockBackend *blk,
return -1;
}
- /* test msdos magic */
+ /* test MS-DOS magic */
if (buf[510] != 0x55 || buf[511] != 0xaa) {
return -1;
@@ -892,5 +892,5 @@ static Property pflash_cfi01_properties[] = {
* ie the total size of the device divided by the sector length.
* If we're emulating flash devices wired in parallel the actual
- * number of blocks per indvidual device will differ.
+ * number of blocks per individual device will differ.
*/
DEFINE_PROP_UINT32("num-blocks", PFlashCFI01, nb_blocs, 0),
@@ -576,5 +576,5 @@ static int cadence_uart_pre_load(void *opaque)
CadenceUARTState *s = opaque;
- /* the frequency will be overriden if the refclk field is present */
+ /* the frequency will be overridden if the refclk field is present */
clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK);
return 0;
@@ -113,5 +113,5 @@ static void imx_serial_reset_at_boot(DeviceState *dev)
/*
- * enable the uart on boot, so messages from the linux decompresser
+ * enable the uart on boot, so messages from the linux decompressor
* are visible. On real hardware this is done by the boot rom
* before anything else is loaded.
@@ -55,5 +55,5 @@
#define UART_IIR_CTI 0x0C /* Character Timeout Indication */
-#define UART_IIR_FENF 0x80 /* Fifo enabled, but not functionning */
+#define UART_IIR_FENF 0x80 /* Fifo enabled, but not functioning */
#define UART_IIR_FE 0xC0 /* Fifo enabled */
@@ -25,5 +25,5 @@
* This device allows the user to monkey patch memory. To be able to do
- * this it needs a backend to manage the datas, the same as other
+ * this it needs a backend to manage the data, the same as other
* memory-related devices. In this case as the backend is so trivial we
* have merged it with the frontend instead of creating and maintaining a
@@ -167,5 +167,5 @@ static void generic_loader_realize(DeviceState *dev, Error **errp)
}
- /* Convert the data endiannes */
+ /* Convert the data endianness */
if (s->data_be) {
s->data = cpu_to_be64(s->data);
@@ -1415,5 +1415,5 @@ void machine_run_board_init(MachineState *machine, const char *mem_path, Error *
if (object_class_dynamic_cast(oc,
machine_class->valid_cpu_types[i])) {
- /* The user specificed CPU is in the valid field, we are
+ /* The user specified CPU is in the valid field, we are
* good to go.
*/
@@ -108,5 +108,5 @@ static void set_drive_helper(Object *obj, Visitor *v, const char *name,
if (*ptr) {
- /* BlockBackend alread exists. So, we want to change attached node */
+ /* BlockBackend already exists. So, we want to change attached node */
blk = *ptr;
ctx = blk_get_aio_context(blk);
@@ -162,5 +162,5 @@ static void a15mp_priv_class_init(ObjectClass *klass, void *data)
dc->realize = a15mp_priv_realize;
device_class_set_props(dc, a15mp_priv_properties);
- /* We currently have no savable state */
+ /* We currently have no saveable state */
}
@@ -198,5 +198,5 @@ CXLRetCode cxl_event_clear_records(CXLDeviceState *cxlds, CXLClearEventPayload *
QEMU_LOCK_GUARD(&log->lock);
/*
- * Must itterate the queue twice.
+ * Must iterate the queue twice.
* "The device shall verify the event record handles specified in the input
* payload are in temporal order. If the device detects an older event
@@ -40,5 +40,5 @@
* setting the length, and returning a valid return code.
*
- * XXX: The handler need not worry about endianess. The payload is read out of
+ * XXX: The handler need not worry about endianness. The payload is read out of
* a register interface that already deals with it.
*/
@@ -502,5 +502,5 @@ static CXLRetCode cmd_media_get_poison_list(struct cxl_cmd *cmd,
query_start = ldq_le_p(&in->pa);
- /* 64 byte alignemnt required */
+ /* 64 byte alignment required */
if (query_start & 0x3f) {
return CXL_MBOX_INVALID_INPUT;
@@ -248,5 +248,5 @@ static void omap_dma_deactivate_channel(struct omap_dma_s *s,
}
- /* Don't deactive the channel if it is synchronized and the DMA request is
+ /* Don't deactivate the channel if it is synchronized and the DMA request is
active */
if (ch->sync && ch->enable && (s->dma->drqbmp & (1ULL << ch->sync)))
@@ -423,5 +423,5 @@ static void omap_dma_transfer_generic(struct soc_dma_ch_s *dma)
if (ch->fs && ch->bs) {
a->pck_element ++;
- /* Check if a full packet has beed transferred. */
+ /* Check if a full packet has been transferred. */
if (a->pck_element == a->pck_elements) {
a->pck_element = 0;
@@ -210,5 +210,5 @@ static void hid_pointer_sync(DeviceState *dev)
curr->dz = 0;
} else {
- /* prepate next (clear rel, copy abs + btns) */
+ /* prepare next (clear rel, copy abs + btns) */
if (hs->kind == HID_MOUSE) {
next->xdx = 0;
@@ -158,12 +158,12 @@ static uint16_t tsc2005_read(TSC2005State *s, int reg)
return ret;
- case 0x8: /* AUX high treshold */
+ case 0x8: /* AUX high threshold */
return s->aux_thr[1];
- case 0x9: /* AUX low treshold */
+ case 0x9: /* AUX low threshold */
return s->aux_thr[0];
- case 0xa: /* TEMP high treshold */
+ case 0xa: /* TEMP high threshold */
return s->temp_thr[1];
- case 0xb: /* TEMP low treshold */
+ case 0xb: /* TEMP low threshold */
return s->temp_thr[0];
@@ -187,15 +187,15 @@ static void tsc2005_write(TSC2005State *s, int reg, uint16_t data)
{
switch (reg) {
- case 0x8: /* AUX high treshold */
+ case 0x8: /* AUX high threshold */
s->aux_thr[1] = data;
break;
- case 0x9: /* AUX low treshold */
+ case 0x9: /* AUX low threshold */
s->aux_thr[0] = data;
break;
- case 0xa: /* TEMP high treshold */
+ case 0xa: /* TEMP high threshold */
s->temp_thr[1] = data;
break;
- case 0xb: /* TEMP low treshold */
+ case 0xb: /* TEMP low threshold */
s->temp_thr[0] = data;
break;
@@ -192,5 +192,5 @@ static MemTxResult extioi_writew(void *opaque, hwaddr addr,
old_data = s->coreisr[cpu][index];
s->coreisr[cpu][index] = old_data & ~val;
- /* write 1 to clear interrrupt */
+ /* write 1 to clear interrupt */
old_data &= val;
irq = ctz32(old_data);
@@ -1,4 +1,4 @@
/*
- * QEMU Loongson Local I/O interrupt controler.
+ * QEMU Loongson Local I/O interrupt controller.
*
* Copyright (c) 2020 Huacai Chen <chenhc@lemote.com>
@@ -69,5 +69,5 @@ static void omap_inth_sir_update(OMAPIntcState *s, int is_fiq)
/* Find the interrupt line with the highest dynamic priority.
- * Note: 0 denotes the hightest priority.
+ * Note: 0 denotes the highest priority.
* If all interrupts have the same priority, the default order is IRQ_N,
* IRQ_N-1,...,IRQ_0. */
@@ -944,5 +944,5 @@ static void pnv_xive_ic_reg_write(void *opaque, hwaddr offset,
case VC_SBC_CONFIG: /* Store EOI configuration */
/*
- * Configure store EOI if required by firwmare (skiboot has removed
+ * Configure store EOI if required by firmware (skiboot has removed
* support recently though)
*/
@@ -28,5 +28,5 @@
/*
- * XIVE Virtualization Controller BAR and Thread Managment BAR that we
+ * XIVE Virtualization Controller BAR and Thread Management BAR that we
* use for the ESB pages and the TIMA pages
*/
@@ -486,5 +486,5 @@ static int kvmppc_xive_get_queues(SpaprXive *xive, Error **errp)
* Whenever the VM is stopped, the VM change handler sets the source
* PQs to PENDING to stop the flow of events and to possibly catch a
- * triggered interrupt occuring while the VM is stopped. The previous
+ * triggered interrupt occurring while the VM is stopped. The previous
* state is saved in anticipation of a migration. The XIVE controller
* is then synced through KVM to flush any in-flight event
@@ -552,5 +552,5 @@ static void kvmppc_xive_change_state_handler(void *opaque, bool running,
/*
* PQ is set to PENDING to possibly catch a triggered
- * interrupt occuring while the VM is stopped (hotplug event
+ * interrupt occurring while the VM is stopped (hotplug event
* for instance) .
*/
@@ -634,5 +634,5 @@ int kvmppc_xive_post_load(SpaprXive *xive, int version_id)
assert(xive->fd != -1);
- /* Restore the ENDT first. The targetting depends on it. */
+ /* Restore the ENDT first. The targeting depends on it. */
for (i = 0; i < xive->nr_ends; i++) {
if (!xive_end_is_valid(&xive->endt[i])) {
@@ -1602,5 +1602,5 @@ int xive_presenter_tctx_match(XivePresenter *xptr, XiveTCTX *tctx,
* It receives notification requests sent by the IVRE to find one
* matching NVT (or more) dispatched on the processor threads. In case
- * of a single NVT notification, the process is abreviated and the
+ * of a single NVT notification, the process is abbreviated and the
* thread is signaled if a match is found. In case of a logical server
* notification (bits ignored at the end of the NVT identifier), the
@@ -543,5 +543,5 @@ static void xive2_router_realize(DeviceState *dev, Error **errp)
/*
* Notification using the END ESe/ESn bit (Event State Buffer for
- * escalation and notification). Profide futher coalescing in the
+ * escalation and notification). Profide further coalescing in the
* Router.
*/
@@ -622,5 +622,5 @@ static void xive2_router_end_notify(Xive2Router *xrtr, uint8_t end_blk,
/*
* Check the END ESn (Event State Buffer for notification) for
- * even futher coalescing in the Router
+ * even further coalescing in the Router
*/
if (!xive2_end_is_notify(&end)) {
@@ -703,5 +703,5 @@ do_escalation:
/*
* Check the END ESe (Event State Buffer for escalation) for even
- * futher coalescing in the Router
+ * further coalescing in the Router
*/
if (!xive2_end_is_uncond_escalation(&end)) {
@@ -302,5 +302,5 @@ static void handle_msg(IPMIBmcExtern *ibe)
return;
} else {
- ibe->inpos--; /* Remove checkum */
+ ibe->inpos--; /* Remove checksum */
}
@@ -539,5 +539,5 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
} else {
/*
- * If no more errors, then follow recomendation of PCI spec
+ * If no more errors, then follow recommendation of PCI spec
* r6.0 6.2.4.2 to set the first error pointer to a status
* bit that will never be used.
@@ -698,5 +698,5 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
&ct3d->cxl_dstate.device_registers);
- /* MSI(-X) Initailization */
+ /* MSI(-X) Initialization */
rc = msix_init_exclusive_bar(pci_dev, msix_num, 4, NULL);
if (rc) {
@@ -707,5 +707,5 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
}
- /* DOE Initailization */
+ /* DOE Initialization */
pcie_doe_init(pci_dev, &ct3d->doe_cdat, 0x190, doe_cdat_prot, true, 0);
@@ -228,5 +228,5 @@ static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock)
* easily. However for CCM provided clocks (like IPG) each GPT
* timer can have its own clock root.
- * This means we need additionnal information when calling this
+ * This means we need additional information when calling this
* function to know the requester's identity.
*/
@@ -247,5 +247,5 @@
#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
#define vSR 0x1400 /* [VIA only] Shift register. */
-#define vACR 0x1600 /* [VIA only] Auxilary control register. */
+#define vACR 0x1600 /* [VIA only] Auxiliary control register. */
#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
/*
@@ -95,10 +95,10 @@ static void stm32f2xx_syscfg_write(void *opaque, hwaddr addr,
case SYSCFG_MEMRMP:
qemu_log_mask(LOG_UNIMP,
- "%s: Changeing the memory mapping isn't supported " \
+ "%s: Changing the memory mapping isn't supported " \
"in QEMU\n", __func__);
return;
case SYSCFG_PMC:
qemu_log_mask(LOG_UNIMP,
- "%s: Changeing the memory mapping isn't supported " \
+ "%s: Changing the memory mapping isn't supported " \
"in QEMU\n", __func__);
return;
@@ -156,5 +156,5 @@ stm32f4xx_syscfg_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx
# stm32f4xx_exti.c
-stm32f4xx_exti_set_irq(int irq, int leve) "Set EXTI: %d to %d"
+stm32f4xx_exti_set_irq(int irq, int level) "Set EXTI: %d to %d"
stm32f4xx_exti_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " "
stm32f4xx_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
@@ -286,5 +286,5 @@ static void zynq_slcr_compute_clocks_internal(ZynqSLCRState *s, uint64_t ps_clk)
/**
- * Compute and set the ouputs clocks periods.
+ * Compute and set the outputs clocks periods.
* But do not propagate them further. Connected clocks
* will not receive any updates (See zynq_slcr_compute_clocks())
@@ -18,5 +18,5 @@
* ---------------------
* While QEMU coding style prefers lowercase hexadecimals in constants, the
- * NVMe subsystem use thes format from the NVMe specifications in the comments
+ * NVMe subsystem use this format from the NVMe specifications in the comments
* (i.e. 'h' suffix instead of '0x' prefix).
*
@@ -731,5 +731,5 @@ static inline void nvme_sg_unmap(NvmeSg *sg)
/*
- * When metadata is transfered as extended LBAs, the DPTR mapped into `sg`
+ * When metadata is transferred as extended LBAs, the DPTR mapped into `sg`
* holds both data and metadata. This function splits the data and metadata
* into two separate QSG/IOVs.
@@ -7595,5 +7595,5 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val)
* NVM Express v1.3d, Section 4.1 state: "If host software writes
* an invalid value to the Submission Queue Tail Doorbell or
- * Completion Queue Head Doorbell regiter and an Asynchronous Event
+ * Completion Queue Head Doorbell register and an Asynchronous Event
* Request command is outstanding, then an asynchronous event is
* posted to the Admin Completion Queue with a status code of
@@ -52,5 +52,5 @@ struct EEPROMState {
/* cells changed since last START? */
bool changed;
- /* during WRITE, # of address bytes transfered */
+ /* during WRITE, # of address bytes transferred */
uint8_t haveaddr;
@@ -878,5 +878,5 @@ static struct {
* Any sub-page size update to these table MRs will be lost during migration,
* as we use aligned size in ram_load_precopy() -> qemu_ram_resize() path.
- * In order to avoid the inconsistency in sizes save them seperately and
+ * In order to avoid the inconsistency in sizes save them separately and
* migrate over in vmstate post_load().
*/
@@ -203,5 +203,5 @@ static void exynos4210_rtc_update_freq(Exynos4210RTCState *s,
freq = s->freq;
- /* set frequncy for time generator */
+ /* set frequency for time generator */
s->freq = RTC_BASE_FREQ / (1 << TICCKSEL(reg_value));
@@ -115,5 +115,5 @@ static const uint8_t ipr_table[NR_IRQS] = {
/*
- * Level triggerd IRQ list
+ * Level triggered IRQ list
* Not listed IRQ is Edge trigger.
* See "11.3.1 Interrupt Vector Table" in hardware manual.
@@ -1322,5 +1322,5 @@ again:
trace_lsi_execute_script_io_selected(id,
insn & (1 << 3) ? " ATN" : "");
- /* ??? Linux drivers compain when this is set. Maybe
+ /* ??? Linux drivers complain when this is set. Maybe
it only applies in low-level mode (unimplemented).
lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */
@@ -66,5 +66,5 @@
#define MFI_DIAG 0xf8 /* Host diag */
#define MFI_SEQ 0xfc /* Sequencer offset */
-#define MFI_1078_EIM 0x80000004 /* 1078 enable intrrupt mask */
+#define MFI_1078_EIM 0x80000004 /* 1078 enable interrupt mask */
#define MFI_RMI 0x2 /* reply message interrupt */
#define MFI_1078_RM 0x80000000 /* reply 1078 message interrupt */
@@ -1225,5 +1225,5 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
break;
- /* Block read commands (Classs 2) */
+ /* Block read commands (Class 2) */
case 16: /* CMD16: SET_BLOCKLEN */
switch (sd->state) {
@@ -1812,5 +1812,5 @@ usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
*
* We don't want to call sdhci_write(.., SDHC_TRNMOD, ...)
- * here becuase it will result in a call to
+ * here because it will result in a call to
* sdhci_send_command(s) which we don't want.
*
@@ -102,5 +102,5 @@ static void isl_pmbus_vr_exit_reset(Object *obj)
}
-/* The raa228000 uses different direct mode coefficents from most isl devices */
+/* The raa228000 uses different direct mode coefficients from most isl devices */
static void raa228000_exit_reset(Object *obj)
{
@@ -735,5 +735,5 @@ static void max34451_init(Object *obj)
/*
* get and set the temperature of the internal temperature sensor in
- * centidegrees Celcius i.e.: 2500 -> 25.00 C, max is 327.67 C
+ * centidegrees Celsius i.e.: 2500 -> 25.00 C, max is 327.67 C
*/
for (int i = 0; i < MAX34451_NUM_TEMP_DEVICES; i++) {
@@ -114,5 +114,5 @@
#define SH7750_TTB_A7 SH7750_A7_REG32(SH7750_TTB_REGOFS)
-/* TLB exeption address register - TEA */
+/* TLB exception address register - TEA */
#define SH7750_TEA_REGOFS 0x00000c /* offset */
#define SH7750_TEA SH7750_P4_REG32(SH7750_TEA_REGOFS)
@@ -184,10 +184,10 @@
#define SH7750_TRA_IMM_S 2
-/* Exeption event register - EXPEVT */
+/* Exception event register - EXPEVT */
#define SH7750_EXPEVT_REGOFS 0x000024
#define SH7750_EXPEVT SH7750_P4_REG32(SH7750_EXPEVT_REGOFS)
#define SH7750_EXPEVT_A7 SH7750_A7_REG32(SH7750_EXPEVT_REGOFS)
-#define SH7750_EXPEVT_EX 0x00000fff /* Exeption code */
+#define SH7750_EXPEVT_EX 0x00000fff /* Exception code */
#define SH7750_EXPEVT_EX_S 0
@@ -196,5 +196,5 @@
#define SH7750_INTEVT SH7750_P4_REG32(SH7750_INTEVT_REGOFS)
#define SH7750_INTEVT_A7 SH7750_A7_REG32(SH7750_INTEVT_REGOFS)
-#define SH7750_INTEVT_EX 0x00000fff /* Exeption code */
+#define SH7750_INTEVT_EX 0x00000fff /* Exception code */
#define SH7750_INTEVT_EX_S 0
@@ -1275,13 +1275,13 @@
* User Break Controller registers
*/
-#define SH7750_BARA 0x200000 /* Break address regiser A */
-#define SH7750_BAMRA 0x200004 /* Break address mask regiser A */
-#define SH7750_BBRA 0x200008 /* Break bus cycle regiser A */
-#define SH7750_BARB 0x20000c /* Break address regiser B */
-#define SH7750_BAMRB 0x200010 /* Break address mask regiser B */
-#define SH7750_BBRB 0x200014 /* Break bus cycle regiser B */
-#define SH7750_BASRB 0x000018 /* Break ASID regiser B */
-#define SH7750_BDRB 0x200018 /* Break data regiser B */
-#define SH7750_BDMRB 0x20001c /* Break data mask regiser B */
+#define SH7750_BARA 0x200000 /* Break address register A */
+#define SH7750_BAMRA 0x200004 /* Break address mask register A */
+#define SH7750_BBRA 0x200008 /* Break bus cycle register A */
+#define SH7750_BARB 0x20000c /* Break address register B */
+#define SH7750_BAMRB 0x200010 /* Break address mask register B */
+#define SH7750_BBRB 0x200014 /* Break bus cycle register B */
+#define SH7750_BASRB 0x000018 /* Break ASID register B */
+#define SH7750_BDRB 0x200018 /* Break data register B */
+#define SH7750_BDMRB 0x20001c /* Break data mask register B */
#define SH7750_BRCR 0x200020 /* Break control register */
@@ -1111,5 +1111,5 @@ void smbios_get_tables(MachineState *ms,
/*
- * The offset determines if we need to keep additional space betweeen
+ * The offset determines if we need to keep additional space between
* table 17 and table 19 header handle numbers so that they do
* not overlap. For example, for a VM with larger than 8 TB guest
@@ -164,5 +164,5 @@
/* Poll timeout not implemented */
FIELD(GQSPI_CNFG, EN_POLL_TIMEOUT, 20, 1)
- /* QEMU doesnt care about any of these last three */
+ /* QEMU doesn't care about any of these last three */
FIELD(GQSPI_CNFG, BR, 3, 3)
FIELD(GQSPI_CNFG, CPH, 2, 1)
@@ -470,5 +470,5 @@ static void xlnx_zynqmp_qspips_flush_fifo_g(XlnxZynqMPQSPIPS *s)
imm = ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, IMMEDIATE_DATA);
if (!ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, DATA_XFER)) {
- /* immedate transfer */
+ /* immediate transfer */
if (ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, TRANSMIT) ||
ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, RECIEVE)) {
@@ -769,5 +769,5 @@ static void xilinx_spips_check_zero_pump(XilinxSPIPS *s)
while (s->regs[R_TRANSFER_SIZE] &&
s->rx_fifo.num + s->tx_fifo.num < RXFF_A_Q - 3) {
- /* endianess just doesn't matter when zero pumping */
+ /* endianness just doesn't matter when zero pumping */
tx_data_bytes(&s->tx_fifo, 0, 4, false);
s->regs[R_TRANSFER_SIZE] &= ~0x03ull;
@@ -838,5 +838,5 @@ static void ospi_do_ind_read(XlnxVersalOspi *s)
while (!ospi_ind_op_completed(op) &&
!fifo8_is_full(&s->rx_sram)) {
- /* Read reqested number of bytes, max bytes limited to size of sram */
+ /* Read requested number of bytes, max bytes limited to size of sram */
next_b = ind_op_next_byte(op);
end_b = next_b + fifo8_num_free(&s->rx_sram);
@@ -237,5 +237,5 @@ static void watchdog_hit(void *opaque)
ETRAXTimerState *t = opaque;
if (t->wd_hits == 0) {
- /* real hw gives a single tick before reseting but we are
+ /* real hw gives a single tick before resetting but we are
a bit friendlier to compensate for our slower execution. */
ptimer_set_count(t->ptimer_wd, 10);
@@ -116,5 +116,5 @@ static int elapsed_time(RTMRState *tmr, int ch, int64_t delta)
tmr->div_round[ch] %= divrate;
} else {
- /* disble clock. so no update */
+ /* disable clock. so no update */
et = 0;
}
@@ -656,5 +656,5 @@ virtio_crypto_sym_op_helper(VirtIODevice *vdev,
op_info->cipher_start_src_offset = cipher_start_src_offset;
op_info->len_to_cipher = len_to_cipher;
- /* Handle the initilization vector */
+ /* Handle the initialization vector */
if (op_info->iv_len > 0) {
DPRINTF("iv_len=%" PRIu32 "\n", op_info->iv_len);
@@ -1279,5 +1279,5 @@ static void virtio_crypto_instance_init(Object *obj)
/*
* The default config_size is sizeof(struct virtio_crypto_config).
- * Can be overriden with virtio_crypto_set_config_size.
+ * Can be overridden with virtio_crypto_set_config_size.
*/
vcrypto->config_size = sizeof(struct virtio_crypto_config);
@@ -1120,5 +1120,5 @@ static int virtio_mem_mig_sanity_checks_post_load(void *opaque, int version_id)
}
/*
- * Note: Preparation for resizeable memory regions. The maximum size
+ * Note: Preparation for resizable memory regions. The maximum size
* of the memory region must not change during migration.
*/
@@ -2097,5 +2097,5 @@ void virtio_queue_enable(VirtIODevice *vdev, uint32_t queue_index)
*
if (!virtio_vdev_has_feature(vdev, VIRTIO_F_VERSION_1)) {
- error_report("queue_enable is only suppported in devices of virtio "
+ error_report("queue_enable is only supported in devices of virtio "
"1.0 or later.");
}
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> --- hw/acpi/aml-build.c | 6 +++--- hw/acpi/hmat.c | 2 +- hw/acpi/nvdimm.c | 2 +- hw/block/hd-geometry.c | 4 ++-- hw/block/pflash_cfi01.c | 2 +- hw/char/cadence_uart.c | 2 +- hw/char/imx_serial.c | 2 +- hw/char/serial.c | 2 +- hw/core/generic-loader.c | 4 ++-- hw/core/machine.c | 2 +- hw/core/qdev-properties-system.c | 2 +- hw/cpu/a15mpcore.c | 2 +- hw/cxl/cxl-events.c | 2 +- hw/cxl/cxl-mailbox-utils.c | 4 ++-- hw/dma/omap_dma.c | 4 ++-- hw/input/hid.c | 2 +- hw/input/tsc2005.c | 16 ++++++++-------- hw/intc/loongarch_extioi.c | 2 +- hw/intc/loongson_liointc.c | 2 +- hw/intc/omap_intc.c | 2 +- hw/intc/pnv_xive.c | 2 +- hw/intc/spapr_xive.c | 2 +- hw/intc/spapr_xive_kvm.c | 6 +++--- hw/intc/xive.c | 2 +- hw/intc/xive2.c | 6 +++--- hw/ipmi/ipmi_bmc_extern.c | 2 +- hw/mem/cxl_type3.c | 6 +++--- hw/misc/imx7_ccm.c | 2 +- hw/misc/mac_via.c | 2 +- hw/misc/stm32f2xx_syscfg.c | 4 ++-- hw/misc/trace-events | 2 +- hw/misc/zynq_slcr.c | 2 +- hw/nvme/ctrl.c | 6 +++--- hw/nvram/eeprom_at24c.c | 2 +- hw/nvram/fw_cfg.c | 2 +- hw/rtc/exynos4210_rtc.c | 2 +- hw/rx/rx62n.c | 2 +- hw/scsi/lsi53c895a.c | 2 +- hw/scsi/mfi.h | 2 +- hw/sd/sd.c | 2 +- hw/sd/sdhci.c | 2 +- hw/sensor/isl_pmbus_vr.c | 2 +- hw/sensor/max34451.c | 2 +- hw/sh4/sh7750_regs.h | 26 +++++++++++++------------- hw/smbios/smbios.c | 2 +- hw/ssi/xilinx_spips.c | 6 +++--- hw/ssi/xlnx-versal-ospi.c | 2 +- hw/timer/etraxfs_timer.c | 2 +- hw/timer/renesas_tmr.c | 2 +- hw/virtio/virtio-crypto.c | 4 ++-- hw/virtio/virtio-mem.c | 2 +- hw/virtio/virtio.c | 2 +- 52 files changed, 89 insertions(+), 89 deletions(-)