diff mbox series

[v8,2/4] virtio-blk: add zoned storage emulation for zoned devices

Message ID 20230323052828.6545-3-faithilikerun@gmail.com
State New
Headers show
Series Add zoned storage emulation to virtio-blk driver | expand

Commit Message

Sam Li March 23, 2023, 5:28 a.m. UTC
This patch extends virtio-blk emulation to handle zoned device commands
by calling the new block layer APIs to perform zoned device I/O on
behalf of the guest. It supports Report Zone, four zone oparations (open,
close, finish, reset), and Append Zone.

The VIRTIO_BLK_F_ZONED feature bit will only be set if the host does
support zoned block devices. Regular block devices(conventional zones)
will not be set.

The guest os can use blktests, fio to test those commands on zoned devices.
Furthermore, using zonefs to test zone append write is also supported.

Signed-off-by: Sam Li <faithilikerun@gmail.com>
---
 hw/block/virtio-blk-common.c |   2 +
 hw/block/virtio-blk.c        | 389 +++++++++++++++++++++++++++++++++++
 2 files changed, 391 insertions(+)

Comments

Matias Bjørling March 23, 2023, 1:39 p.m. UTC | #1
On 23/03/2023 06.28, Sam Li wrote:
> This patch extends virtio-blk emulation to handle zoned device commands
> by calling the new block layer APIs to perform zoned device I/O on
> behalf of the guest. It supports Report Zone, four zone oparations (open,
> close, finish, reset), and Append Zone.
> 
> The VIRTIO_BLK_F_ZONED feature bit will only be set if the host does
> support zoned block devices. Regular block devices(conventional zones)
> will not be set.
> 
> The guest os can use blktests, fio to test those commands on zoned devices.
> Furthermore, using zonefs to test zone append write is also supported.
> 
> Signed-off-by: Sam Li <faithilikerun@gmail.com>
> ---
>   hw/block/virtio-blk-common.c |   2 +
>   hw/block/virtio-blk.c        | 389 +++++++++++++++++++++++++++++++++++
>   2 files changed, 391 insertions(+)
> 
> diff --git a/hw/block/virtio-blk-common.c b/hw/block/virtio-blk-common.c
> index ac52d7c176..e2f8e2f6da 100644
> --- a/hw/block/virtio-blk-common.c
> +++ b/hw/block/virtio-blk-common.c
> @@ -29,6 +29,8 @@ static const VirtIOFeature feature_sizes[] = {
>        .end = endof(struct virtio_blk_config, discard_sector_alignment)},
>       {.flags = 1ULL << VIRTIO_BLK_F_WRITE_ZEROES,
>        .end = endof(struct virtio_blk_config, write_zeroes_may_unmap)},
> +    {.flags = 1ULL << VIRTIO_BLK_F_ZONED,
> +     .end = endof(struct virtio_blk_config, zoned)},
>       {}
>   };

I used the qemu monitor to expect the state of the devices, and on the 
zoned block device specific entries, the zoned device feature shows up 
in the "unknown-features" field (info virtio-status <device>)

What is missing is an entry in the blk_feature_map structure within 
hw/virtio/virtio-qmp.c. The below fixes it up.

diff --git i/hw/virtio/virtio-qmp.c w/hw/virtio/virtio-qmp.c
index b70148aba9..3efa529bab 100644
--- i/hw/virtio/virtio-qmp.c
+++ w/hw/virtio/virtio-qmp.c
@@ -176,6 +176,8 @@ static const qmp_virtio_feature_map_t 
virtio_blk_feature_map[] = {
              "VIRTIO_BLK_F_DISCARD: Discard command supported"),
      FEATURE_ENTRY(VIRTIO_BLK_F_WRITE_ZEROES, \
              "VIRTIO_BLK_F_WRITE_ZEROES: Write zeroes command supported"),
+    FEATURE_ENTRY(VIRTIO_BLK_F_ZONED, \
+            "VIRTIO_BLK_F_ZONED: Zoned block device"),
  #ifndef VIRTIO_BLK_NO_LEGACY
      FEATURE_ENTRY(VIRTIO_BLK_F_BARRIER, \
              "VIRTIO_BLK_F_BARRIER: Request barriers supported"),

Which then lets qemu report the support like this:

(qemu) info virtio-status /machine/peripheral/virtblk0/virtio-backend
/machine/peripheral/virtblk0/virtio-backend:
   device_name:             virtio-blk
   device_id:               2
   vhost_started:           false
   bus_name:                (null)
   broken:                  false
   disabled:                false
   disable_legacy_check:    false
   started:                 true
   use_started:             true
   start_on_kick:           false
   use_guest_notifier_mask: true
   vm_running:              true
   num_vqs:                 4
   queue_sel:               3
   isr:                     1
   endianness:              little
   status:
         VIRTIO_CONFIG_S_ACKNOWLEDGE: Valid virtio device found,
         VIRTIO_CONFIG_S_DRIVER: Guest OS compatible with device,
         VIRTIO_CONFIG_S_FEATURES_OK: Feature negotiation complete,
         VIRTIO_CONFIG_S_DRIVER_OK: Driver setup and ready
   Guest features:
         VIRTIO_RING_F_EVENT_IDX: Used & avail. event fields enabled,
         VIRTIO_RING_F_INDIRECT_DESC: Indirect descriptors supported,
         VIRTIO_F_VERSION_1: Device compliant for v1 spec (legacy)
         VIRTIO_BLK_F_CONFIG_WCE: Cache writeback and ...,
         VIRTIO_BLK_F_FLUSH: Flush command supported,
         VIRTIO_BLK_F_ZONED: Zoned block device,
         VIRTIO_BLK_F_WRITE_ZEROES: Write zeroes command supported,
         VIRTIO_BLK_F_MQ: Multiqueue supported,
         VIRTIO_BLK_F_TOPOLOGY: Topology information available,
         VIRTIO_BLK_F_BLK_SIZE: Block size of disk available,
         VIRTIO_BLK_F_GEOMETRY: Legacy geometry available,
         VIRTIO_BLK_F_SEG_MAX: Max segments in a request is seg_max
   unknown-features(0x0000010000000000)
   Host features:
         VIRTIO_RING_F_EVENT_IDX: Used & avail. event fields enabled,
         VIRTIO_RING_F_INDIRECT_DESC: Indirect descriptors supported,
         VIRTIO_F_VERSION_1: Device compliant for v1 spec (legacy),
         VIRTIO_F_ANY_LAYOUT: Device accepts arbitrary desc. layouts,
         VIRTIO_F_NOTIFY_ON_EMPTY: Notify when device ...,
         VHOST_USER_F_PROTOCOL_FEATURES: Vhost-user protocol ...,
         VIRTIO_BLK_F_CONFIG_WCE: Cache writeback and w...,
         VIRTIO_BLK_F_FLUSH: Flush command supported,
         VIRTIO_BLK_F_ZONED: Zoned block device,
         VIRTIO_BLK_F_WRITE_ZEROES: Write zeroes command supported,
         VIRTIO_BLK_F_MQ: Multiqueue supported,
         VIRTIO_BLK_F_TOPOLOGY: Topology information available,
         VIRTIO_BLK_F_BLK_SIZE: Block size of disk available,
         VIRTIO_BLK_F_GEOMETRY: Legacy geometry available,
         VIRTIO_BLK_F_SEG_MAX: Max segments in a request is seg_max
   unknown-features(0x0000010000000000)
   Backend features:

Cheers, Matias
Sam Li March 23, 2023, 1:43 p.m. UTC | #2
Matias Bjørling <m@bjorling.me> 于2023年3月23日周四 21:39写道:
>
> On 23/03/2023 06.28, Sam Li wrote:
> > This patch extends virtio-blk emulation to handle zoned device commands
> > by calling the new block layer APIs to perform zoned device I/O on
> > behalf of the guest. It supports Report Zone, four zone oparations (open,
> > close, finish, reset), and Append Zone.
> >
> > The VIRTIO_BLK_F_ZONED feature bit will only be set if the host does
> > support zoned block devices. Regular block devices(conventional zones)
> > will not be set.
> >
> > The guest os can use blktests, fio to test those commands on zoned devices.
> > Furthermore, using zonefs to test zone append write is also supported.
> >
> > Signed-off-by: Sam Li <faithilikerun@gmail.com>
> > ---
> >   hw/block/virtio-blk-common.c |   2 +
> >   hw/block/virtio-blk.c        | 389 +++++++++++++++++++++++++++++++++++
> >   2 files changed, 391 insertions(+)
> >
> > diff --git a/hw/block/virtio-blk-common.c b/hw/block/virtio-blk-common.c
> > index ac52d7c176..e2f8e2f6da 100644
> > --- a/hw/block/virtio-blk-common.c
> > +++ b/hw/block/virtio-blk-common.c
> > @@ -29,6 +29,8 @@ static const VirtIOFeature feature_sizes[] = {
> >        .end = endof(struct virtio_blk_config, discard_sector_alignment)},
> >       {.flags = 1ULL << VIRTIO_BLK_F_WRITE_ZEROES,
> >        .end = endof(struct virtio_blk_config, write_zeroes_may_unmap)},
> > +    {.flags = 1ULL << VIRTIO_BLK_F_ZONED,
> > +     .end = endof(struct virtio_blk_config, zoned)},
> >       {}
> >   };
>
> I used the qemu monitor to expect the state of the devices, and on the
> zoned block device specific entries, the zoned device feature shows up
> in the "unknown-features" field (info virtio-status <device>)
>
> What is missing is an entry in the blk_feature_map structure within
> hw/virtio/virtio-qmp.c. The below fixes it up.
>
> diff --git i/hw/virtio/virtio-qmp.c w/hw/virtio/virtio-qmp.c
> index b70148aba9..3efa529bab 100644
> --- i/hw/virtio/virtio-qmp.c
> +++ w/hw/virtio/virtio-qmp.c
> @@ -176,6 +176,8 @@ static const qmp_virtio_feature_map_t
> virtio_blk_feature_map[] = {
>               "VIRTIO_BLK_F_DISCARD: Discard command supported"),
>       FEATURE_ENTRY(VIRTIO_BLK_F_WRITE_ZEROES, \
>               "VIRTIO_BLK_F_WRITE_ZEROES: Write zeroes command supported"),
> +    FEATURE_ENTRY(VIRTIO_BLK_F_ZONED, \
> +            "VIRTIO_BLK_F_ZONED: Zoned block device"),
>   #ifndef VIRTIO_BLK_NO_LEGACY
>       FEATURE_ENTRY(VIRTIO_BLK_F_BARRIER, \
>               "VIRTIO_BLK_F_BARRIER: Request barriers supported"),
>
> Which then lets qemu report the support like this:
>
> (qemu) info virtio-status /machine/peripheral/virtblk0/virtio-backend
> /machine/peripheral/virtblk0/virtio-backend:
>    device_name:             virtio-blk
>    device_id:               2
>    vhost_started:           false
>    bus_name:                (null)
>    broken:                  false
>    disabled:                false
>    disable_legacy_check:    false
>    started:                 true
>    use_started:             true
>    start_on_kick:           false
>    use_guest_notifier_mask: true
>    vm_running:              true
>    num_vqs:                 4
>    queue_sel:               3
>    isr:                     1
>    endianness:              little
>    status:
>          VIRTIO_CONFIG_S_ACKNOWLEDGE: Valid virtio device found,
>          VIRTIO_CONFIG_S_DRIVER: Guest OS compatible with device,
>          VIRTIO_CONFIG_S_FEATURES_OK: Feature negotiation complete,
>          VIRTIO_CONFIG_S_DRIVER_OK: Driver setup and ready
>    Guest features:
>          VIRTIO_RING_F_EVENT_IDX: Used & avail. event fields enabled,
>          VIRTIO_RING_F_INDIRECT_DESC: Indirect descriptors supported,
>          VIRTIO_F_VERSION_1: Device compliant for v1 spec (legacy)
>          VIRTIO_BLK_F_CONFIG_WCE: Cache writeback and ...,
>          VIRTIO_BLK_F_FLUSH: Flush command supported,
>          VIRTIO_BLK_F_ZONED: Zoned block device,
>          VIRTIO_BLK_F_WRITE_ZEROES: Write zeroes command supported,
>          VIRTIO_BLK_F_MQ: Multiqueue supported,
>          VIRTIO_BLK_F_TOPOLOGY: Topology information available,
>          VIRTIO_BLK_F_BLK_SIZE: Block size of disk available,
>          VIRTIO_BLK_F_GEOMETRY: Legacy geometry available,
>          VIRTIO_BLK_F_SEG_MAX: Max segments in a request is seg_max
>    unknown-features(0x0000010000000000)
>    Host features:
>          VIRTIO_RING_F_EVENT_IDX: Used & avail. event fields enabled,
>          VIRTIO_RING_F_INDIRECT_DESC: Indirect descriptors supported,
>          VIRTIO_F_VERSION_1: Device compliant for v1 spec (legacy),
>          VIRTIO_F_ANY_LAYOUT: Device accepts arbitrary desc. layouts,
>          VIRTIO_F_NOTIFY_ON_EMPTY: Notify when device ...,
>          VHOST_USER_F_PROTOCOL_FEATURES: Vhost-user protocol ...,
>          VIRTIO_BLK_F_CONFIG_WCE: Cache writeback and w...,
>          VIRTIO_BLK_F_FLUSH: Flush command supported,
>          VIRTIO_BLK_F_ZONED: Zoned block device,
>          VIRTIO_BLK_F_WRITE_ZEROES: Write zeroes command supported,
>          VIRTIO_BLK_F_MQ: Multiqueue supported,
>          VIRTIO_BLK_F_TOPOLOGY: Topology information available,
>          VIRTIO_BLK_F_BLK_SIZE: Block size of disk available,
>          VIRTIO_BLK_F_GEOMETRY: Legacy geometry available,
>          VIRTIO_BLK_F_SEG_MAX: Max segments in a request is seg_max
>    unknown-features(0x0000010000000000)
>    Backend features:

Great!

>
> Cheers, Matias
diff mbox series

Patch

diff --git a/hw/block/virtio-blk-common.c b/hw/block/virtio-blk-common.c
index ac52d7c176..e2f8e2f6da 100644
--- a/hw/block/virtio-blk-common.c
+++ b/hw/block/virtio-blk-common.c
@@ -29,6 +29,8 @@  static const VirtIOFeature feature_sizes[] = {
      .end = endof(struct virtio_blk_config, discard_sector_alignment)},
     {.flags = 1ULL << VIRTIO_BLK_F_WRITE_ZEROES,
      .end = endof(struct virtio_blk_config, write_zeroes_may_unmap)},
+    {.flags = 1ULL << VIRTIO_BLK_F_ZONED,
+     .end = endof(struct virtio_blk_config, zoned)},
     {}
 };
 
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index cefca93b31..66c2bc4b16 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -17,6 +17,7 @@ 
 #include "qemu/module.h"
 #include "qemu/error-report.h"
 #include "qemu/main-loop.h"
+#include "block/block_int.h"
 #include "trace.h"
 #include "hw/block/block.h"
 #include "hw/qdev-properties.h"
@@ -601,6 +602,335 @@  err:
     return err_status;
 }
 
+typedef struct ZoneCmdData {
+    VirtIOBlockReq *req;
+    struct iovec *in_iov;
+    unsigned in_num;
+    union {
+        struct {
+            unsigned int nr_zones;
+            BlockZoneDescriptor *zones;
+        } zone_report_data;
+        struct {
+            int64_t offset;
+        } zone_append_data;
+    };
+} ZoneCmdData;
+
+/*
+ * check zoned_request: error checking before issuing requests. If all checks
+ * passed, return true.
+ * append: true if only zone append requests issued.
+ */
+static bool check_zoned_request(VirtIOBlock *s, int64_t offset, int64_t len,
+                             bool append, uint8_t *status) {
+    BlockDriverState *bs = blk_bs(s->blk);
+    int index;
+
+    if (!virtio_has_feature(s->host_features, VIRTIO_BLK_F_ZONED)) {
+        *status = VIRTIO_BLK_S_UNSUPP;
+        return false;
+    }
+
+    if (offset < 0 || len < 0 || len > (bs->total_sectors << BDRV_SECTOR_BITS)
+        || offset > (bs->total_sectors << BDRV_SECTOR_BITS) - len) {
+        *status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+        return false;
+    }
+
+    if (append) {
+        if (bs->bl.write_granularity) {
+            if ((offset % bs->bl.write_granularity) != 0) {
+                *status = VIRTIO_BLK_S_ZONE_UNALIGNED_WP;
+                return false;
+            }
+        }
+
+        index = offset / bs->bl.zone_size;
+        if (BDRV_ZT_IS_CONV(bs->bl.wps->wp[index])) {
+            *status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+            return false;
+        }
+
+        if (len / 512 > bs->bl.max_append_sectors) {
+            if (bs->bl.max_append_sectors == 0) {
+                *status = VIRTIO_BLK_S_UNSUPP;
+            } else {
+                *status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+            }
+            return false;
+        }
+    }
+    return true;
+}
+
+static void virtio_blk_zone_report_complete(void *opaque, int ret)
+{
+    ZoneCmdData *data = opaque;
+    VirtIOBlockReq *req = data->req;
+    VirtIOBlock *s = req->dev;
+    VirtIODevice *vdev = VIRTIO_DEVICE(req->dev);
+    struct iovec *in_iov = data->in_iov;
+    unsigned in_num = data->in_num;
+    int64_t zrp_size, n, j = 0;
+    int64_t nz = data->zone_report_data.nr_zones;
+    int8_t err_status = VIRTIO_BLK_S_OK;
+
+    if (ret) {
+        err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+        goto out;
+    }
+
+    struct virtio_blk_zone_report zrp_hdr = (struct virtio_blk_zone_report) {
+        .nr_zones = cpu_to_le64(nz),
+    };
+    zrp_size = sizeof(struct virtio_blk_zone_report)
+               + sizeof(struct virtio_blk_zone_descriptor) * nz;
+    n = iov_from_buf(in_iov, in_num, 0, &zrp_hdr, sizeof(zrp_hdr));
+    if (n != sizeof(zrp_hdr)) {
+        virtio_error(vdev, "Driver provided input buffer that is too small!");
+        err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+        goto out;
+    }
+
+    for (size_t i = sizeof(zrp_hdr); i < zrp_size;
+        i += sizeof(struct virtio_blk_zone_descriptor), ++j) {
+        struct virtio_blk_zone_descriptor desc =
+            (struct virtio_blk_zone_descriptor) {
+                .z_start = cpu_to_le64(data->zone_report_data.zones[j].start
+                    >> BDRV_SECTOR_BITS),
+                .z_cap = cpu_to_le64(data->zone_report_data.zones[j].cap
+                    >> BDRV_SECTOR_BITS),
+                .z_wp = cpu_to_le64(data->zone_report_data.zones[j].wp
+                    >> BDRV_SECTOR_BITS),
+        };
+
+        switch (data->zone_report_data.zones[j].type) {
+        case BLK_ZT_CONV:
+            desc.z_type = VIRTIO_BLK_ZT_CONV;
+            break;
+        case BLK_ZT_SWR:
+            desc.z_type = VIRTIO_BLK_ZT_SWR;
+            break;
+        case BLK_ZT_SWP:
+            desc.z_type = VIRTIO_BLK_ZT_SWP;
+            break;
+        default:
+            g_assert_not_reached();
+        }
+
+        switch (data->zone_report_data.zones[j].state) {
+        case BLK_ZS_RDONLY:
+            desc.z_state = VIRTIO_BLK_ZS_RDONLY;
+            break;
+        case BLK_ZS_OFFLINE:
+            desc.z_state = VIRTIO_BLK_ZS_OFFLINE;
+            break;
+        case BLK_ZS_EMPTY:
+            desc.z_state = VIRTIO_BLK_ZS_EMPTY;
+            break;
+        case BLK_ZS_CLOSED:
+            desc.z_state = VIRTIO_BLK_ZS_CLOSED;
+            break;
+        case BLK_ZS_FULL:
+            desc.z_state = VIRTIO_BLK_ZS_FULL;
+            break;
+        case BLK_ZS_EOPEN:
+            desc.z_state = VIRTIO_BLK_ZS_EOPEN;
+            break;
+        case BLK_ZS_IOPEN:
+            desc.z_state = VIRTIO_BLK_ZS_IOPEN;
+            break;
+        case BLK_ZS_NOT_WP:
+            desc.z_state = VIRTIO_BLK_ZS_NOT_WP;
+            break;
+        default:
+            g_assert_not_reached();
+        }
+
+        /* TODO: it takes O(n^2) time complexity. Optimizations required. */
+        n = iov_from_buf(in_iov, in_num, i, &desc, sizeof(desc));
+        if (n != sizeof(desc)) {
+            virtio_error(vdev, "Driver provided input buffer "
+                               "for descriptors that is too small!");
+            err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+        }
+    }
+
+out:
+    aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
+    virtio_blk_req_complete(req, err_status);
+    virtio_blk_free_request(req);
+    aio_context_release(blk_get_aio_context(s->conf.conf.blk));
+    g_free(data->zone_report_data.zones);
+    g_free(data);
+}
+
+static void virtio_blk_handle_zone_report(VirtIOBlockReq *req,
+                                         struct iovec *in_iov,
+                                         unsigned in_num)
+{
+    VirtIOBlock *s = req->dev;
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+    unsigned int nr_zones;
+    ZoneCmdData *data;
+    int64_t zone_size, offset;
+    uint8_t err_status;
+
+    if (req->in_len < sizeof(struct virtio_blk_inhdr) +
+            sizeof(struct virtio_blk_zone_report) +
+            sizeof(struct virtio_blk_zone_descriptor)) {
+        virtio_error(vdev, "in buffer too small for zone report");
+        return;
+    }
+
+    /* start byte offset of the zone report */
+    offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS;
+    if (!check_zoned_request(s, offset, 0, false, &err_status)) {
+        goto out;
+    }
+    nr_zones = (req->in_len - sizeof(struct virtio_blk_inhdr) -
+                sizeof(struct virtio_blk_zone_report)) /
+               sizeof(struct virtio_blk_zone_descriptor);
+
+    zone_size = sizeof(BlockZoneDescriptor) * nr_zones;
+    data = g_malloc(sizeof(ZoneCmdData));
+    data->req = req;
+    data->in_iov = in_iov;
+    data->in_num = in_num;
+    data->zone_report_data.nr_zones = nr_zones;
+    data->zone_report_data.zones = g_malloc(zone_size),
+
+    blk_aio_zone_report(s->blk, offset, &data->zone_report_data.nr_zones,
+                        data->zone_report_data.zones,
+                        virtio_blk_zone_report_complete, data);
+    return;
+out:
+    virtio_blk_req_complete(req, err_status);
+    virtio_blk_free_request(req);
+}
+
+static void virtio_blk_zone_mgmt_complete(void *opaque, int ret)
+{
+    VirtIOBlockReq *req = opaque;
+    VirtIOBlock *s = req->dev;
+    int8_t err_status = VIRTIO_BLK_S_OK;
+
+    if (ret) {
+        err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+    }
+
+    aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
+    virtio_blk_req_complete(req, err_status);
+    virtio_blk_free_request(req);
+    aio_context_release(blk_get_aio_context(s->conf.conf.blk));
+}
+
+static int virtio_blk_handle_zone_mgmt(VirtIOBlockReq *req, BlockZoneOp op)
+{
+    VirtIOBlock *s = req->dev;
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+    BlockDriverState *bs = blk_bs(s->blk);
+    int64_t offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS;
+    uint64_t len;
+    uint64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS;
+    uint8_t err_status = VIRTIO_BLK_S_OK;
+
+    uint32_t type = virtio_ldl_p(vdev, &req->out.type);
+    if (type == VIRTIO_BLK_T_ZONE_RESET_ALL) {
+        /* Entire drive capacity */
+        offset = 0;
+        len = capacity;
+    } else {
+        if (bs->bl.zone_size > capacity - offset) {
+            /* The zoned device allows the last smaller zone. */
+            len = capacity - bs->bl.zone_size * (bs->bl.nr_zones - 1);
+        } else {
+            len = bs->bl.zone_size;
+        }
+    }
+
+    if (!check_zoned_request(s, offset, len, false, &err_status)) {
+        goto out;
+    }
+
+    blk_aio_zone_mgmt(s->blk, op, offset, len,
+                      virtio_blk_zone_mgmt_complete, req);
+
+    return 0;
+out:
+    virtio_blk_req_complete(req, err_status);
+    virtio_blk_free_request(req);
+    return err_status;
+}
+
+static void virtio_blk_zone_append_complete(void *opaque, int ret)
+{
+    ZoneCmdData *data = opaque;
+    VirtIOBlockReq *req = data->req;
+    VirtIOBlock *s = req->dev;
+    VirtIODevice *vdev = VIRTIO_DEVICE(req->dev);
+    int64_t append_sector, n;
+    uint8_t err_status = VIRTIO_BLK_S_OK;
+
+    if (ret) {
+        err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+        goto out;
+    }
+
+    virtio_stq_p(vdev, &append_sector,
+                 data->zone_append_data.offset >> BDRV_SECTOR_BITS);
+    n = iov_from_buf(data->in_iov, data->in_num, 0, &append_sector,
+                     sizeof(append_sector));
+    if (n != sizeof(append_sector)) {
+        virtio_error(vdev, "Driver provided input buffer less than size of "
+                           "append_sector");
+        err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD;
+        goto out;
+    }
+
+out:
+    aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
+    virtio_blk_req_complete(req, err_status);
+    virtio_blk_free_request(req);
+    aio_context_release(blk_get_aio_context(s->conf.conf.blk));
+    g_free(data);
+}
+
+static int virtio_blk_handle_zone_append(VirtIOBlockReq *req,
+                                         struct iovec *out_iov,
+                                         struct iovec *in_iov,
+                                         uint64_t out_num,
+                                         unsigned in_num) {
+    VirtIOBlock *s = req->dev;
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+    uint8_t err_status = VIRTIO_BLK_S_OK;
+
+    int64_t offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS;
+    int64_t len = iov_size(out_iov, out_num);
+
+    if (!check_zoned_request(s, offset, len, true, &err_status)) {
+        goto out;
+    }
+
+    ZoneCmdData *data = g_malloc(sizeof(ZoneCmdData));
+    data->req = req;
+    data->in_iov = in_iov;
+    data->in_num = in_num;
+    data->zone_append_data.offset = offset;
+    qemu_iovec_init_external(&req->qiov, out_iov, out_num);
+    blk_aio_zone_append(s->blk, &data->zone_append_data.offset, &req->qiov, 0,
+                        virtio_blk_zone_append_complete, data);
+    return 0;
+
+out:
+    aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
+    virtio_blk_req_complete(req, err_status);
+    virtio_blk_free_request(req);
+    aio_context_release(blk_get_aio_context(s->conf.conf.blk));
+    return err_status;
+}
+
 static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
 {
     uint32_t type;
@@ -687,6 +1017,24 @@  static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
     case VIRTIO_BLK_T_FLUSH:
         virtio_blk_handle_flush(req, mrb);
         break;
+    case VIRTIO_BLK_T_ZONE_REPORT:
+        virtio_blk_handle_zone_report(req, in_iov, in_num);
+        break;
+    case VIRTIO_BLK_T_ZONE_OPEN:
+        virtio_blk_handle_zone_mgmt(req, BLK_ZO_OPEN);
+        break;
+    case VIRTIO_BLK_T_ZONE_CLOSE:
+        virtio_blk_handle_zone_mgmt(req, BLK_ZO_CLOSE);
+        break;
+    case VIRTIO_BLK_T_ZONE_FINISH:
+        virtio_blk_handle_zone_mgmt(req, BLK_ZO_FINISH);
+        break;
+    case VIRTIO_BLK_T_ZONE_RESET:
+        virtio_blk_handle_zone_mgmt(req, BLK_ZO_RESET);
+        break;
+    case VIRTIO_BLK_T_ZONE_RESET_ALL:
+        virtio_blk_handle_zone_mgmt(req, BLK_ZO_RESET);
+        break;
     case VIRTIO_BLK_T_SCSI_CMD:
         virtio_blk_handle_scsi(req);
         break;
@@ -705,6 +1053,14 @@  static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
         virtio_blk_free_request(req);
         break;
     }
+    case VIRTIO_BLK_T_ZONE_APPEND & ~VIRTIO_BLK_T_OUT:
+        /*
+         * Passing out_iov/out_num and in_iov/in_num is not safe
+         * to access req->elem.out_sg directly because it may be
+         * modified by virtio_blk_handle_request().
+         */
+        virtio_blk_handle_zone_append(req, out_iov, in_iov, out_num, in_num);
+        break;
     /*
      * VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES are defined with
      * VIRTIO_BLK_T_OUT flag set. We masked this flag in the switch statement,
@@ -890,6 +1246,7 @@  static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
 {
     VirtIOBlock *s = VIRTIO_BLK(vdev);
     BlockConf *conf = &s->conf.conf;
+    BlockDriverState *bs = blk_bs(s->blk);
     struct virtio_blk_config blkcfg;
     uint64_t capacity;
     int64_t length;
@@ -954,6 +1311,30 @@  static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
         blkcfg.write_zeroes_may_unmap = 1;
         virtio_stl_p(vdev, &blkcfg.max_write_zeroes_seg, 1);
     }
+    if (bs->bl.zoned != BLK_Z_NONE) {
+        switch (bs->bl.zoned) {
+        case BLK_Z_HM:
+            blkcfg.zoned.model = VIRTIO_BLK_Z_HM;
+            break;
+        case BLK_Z_HA:
+            blkcfg.zoned.model = VIRTIO_BLK_Z_HA;
+            break;
+        default:
+            g_assert_not_reached();
+        }
+
+        virtio_stl_p(vdev, &blkcfg.zoned.zone_sectors,
+                     bs->bl.zone_size / 512);
+        virtio_stl_p(vdev, &blkcfg.zoned.max_active_zones,
+                     bs->bl.max_active_zones);
+        virtio_stl_p(vdev, &blkcfg.zoned.max_open_zones,
+                     bs->bl.max_open_zones);
+        virtio_stl_p(vdev, &blkcfg.zoned.write_granularity, blk_size);
+        virtio_stl_p(vdev, &blkcfg.zoned.max_append_sectors,
+                     bs->bl.max_append_sectors);
+    } else {
+        blkcfg.zoned.model = VIRTIO_BLK_Z_NONE;
+    }
     memcpy(config, &blkcfg, s->config_size);
 }
 
@@ -1118,6 +1499,7 @@  static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
     VirtIODevice *vdev = VIRTIO_DEVICE(dev);
     VirtIOBlock *s = VIRTIO_BLK(dev);
     VirtIOBlkConf *conf = &s->conf;
+    BlockDriverState *bs = blk_bs(conf->conf.blk);
     Error *err = NULL;
     unsigned i;
 
@@ -1163,6 +1545,13 @@  static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
         return;
     }
 
+    if (bs->bl.zoned != BLK_Z_NONE) {
+        virtio_add_feature(&s->host_features, VIRTIO_BLK_F_ZONED);
+        if (bs->bl.zoned == BLK_Z_HM) {
+            virtio_clear_feature(&s->host_features, VIRTIO_BLK_F_DISCARD);
+        }
+    }
+
     if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD) &&
         (!conf->max_discard_sectors ||
          conf->max_discard_sectors > BDRV_REQUEST_MAX_SECTORS)) {