diff mbox series

[PULL,01/14] block: add 'force' parameter to 'blockdev-change-medium' command

Message ID 20220425140821.957511-2-hreitz@redhat.com
State New
Headers show
Series [PULL,01/14] block: add 'force' parameter to 'blockdev-change-medium' command | expand

Commit Message

Hanna Czenczek April 25, 2022, 2:08 p.m. UTC
From: "Denis V. Lunev" <den@openvz.org>

'blockdev-change-medium' is a convinient wrapper for the following
sequence of commands:
 * blockdev-open-tray
 * blockdev-remove-medium
 * blockdev-insert-medium
 * blockdev-close-tray
and should be used f.e. to change ISO image inside the CD-ROM tray.
Though the guest could lock the tray and some linux guests like
CentOS 8.5 actually does that. In this case the execution if this
command results in the error like the following:
  Device 'scsi0-0-1-0' is locked and force was not specified,
  wait for tray to open and try again.

This situation is could be resolved 'blockdev-open-tray' by passing
flag 'force' inside. Thus is seems reasonable to add the same
capability for 'blockdev-change-medium' too.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Acked-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220412221846.280723-1-den@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
---
 qapi/block.json     |  6 ++++++
 block/qapi-sysemu.c |  3 ++-
 monitor/hmp-cmds.c  |  4 +++-
 hmp-commands.hx     | 11 +++++++----
 ui/cocoa.m          |  1 +
 5 files changed, 19 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/qapi/block.json b/qapi/block.json
index 82fcf2c914..3f100d4887 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -326,6 +326,11 @@ 
 # @read-only-mode: change the read-only mode of the device; defaults
 #                  to 'retain'
 #
+# @force: if false (the default), an eject request through blockdev-open-tray
+#         will be sent to the guest if it has locked the tray (and the tray
+#         will not be opened immediately); if true, the tray will be opened
+#         regardless of whether it is locked. (since 7.1)
+#
 # Features:
 # @deprecated: Member @device is deprecated.  Use @id instead.
 #
@@ -367,6 +372,7 @@ 
             '*id': 'str',
             'filename': 'str',
             '*format': 'str',
+            '*force': 'bool',
             '*read-only-mode': 'BlockdevChangeReadOnlyMode' } }
 
 
diff --git a/block/qapi-sysemu.c b/block/qapi-sysemu.c
index 8498402ad4..680c7ee342 100644
--- a/block/qapi-sysemu.c
+++ b/block/qapi-sysemu.c
@@ -318,6 +318,7 @@  void qmp_blockdev_change_medium(bool has_device, const char *device,
                                 bool has_id, const char *id,
                                 const char *filename,
                                 bool has_format, const char *format,
+                                bool has_force, bool force,
                                 bool has_read_only,
                                 BlockdevChangeReadOnlyMode read_only,
                                 Error **errp)
@@ -380,7 +381,7 @@  void qmp_blockdev_change_medium(bool has_device, const char *device,
 
     rc = do_open_tray(has_device ? device : NULL,
                       has_id ? id : NULL,
-                      false, &err);
+                      force, &err);
     if (rc && rc != -ENOSYS) {
         error_propagate(errp, err);
         goto fail;
diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
index 634968498b..d8b98bed6c 100644
--- a/monitor/hmp-cmds.c
+++ b/monitor/hmp-cmds.c
@@ -1472,6 +1472,7 @@  void hmp_change(Monitor *mon, const QDict *qdict)
     const char *target = qdict_get_str(qdict, "target");
     const char *arg = qdict_get_try_str(qdict, "arg");
     const char *read_only = qdict_get_try_str(qdict, "read-only-mode");
+    bool force = qdict_get_try_bool(qdict, "force", false);
     BlockdevChangeReadOnlyMode read_only_mode = 0;
     Error *err = NULL;
 
@@ -1508,7 +1509,8 @@  void hmp_change(Monitor *mon, const QDict *qdict)
         }
 
         qmp_blockdev_change_medium(true, device, false, NULL, target,
-                                   !!arg, arg, !!read_only, read_only_mode,
+                                   !!arg, arg, true, force,
+                                   !!read_only, read_only_mode,
                                    &err);
     }
 
diff --git a/hmp-commands.hx b/hmp-commands.hx
index dd4006d355..34947d6d20 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -202,9 +202,9 @@  ERST
 
     {
         .name       = "change",
-        .args_type  = "device:B,target:F,arg:s?,read-only-mode:s?",
-        .params     = "device filename [format [read-only-mode]]",
-        .help       = "change a removable medium, optional format",
+        .args_type  = "device:B,force:-f,target:F,arg:s?,read-only-mode:s?",
+        .params     = "device [-f] filename [format [read-only-mode]]",
+        .help       = "change a removable medium, optional format, use -f to force the operation",
         .cmd        = hmp_change,
     },
 
@@ -212,11 +212,14 @@  SRST
 ``change`` *device* *setting*
   Change the configuration of a device.
 
-  ``change`` *diskdevice* *filename* [*format* [*read-only-mode*]]
+  ``change`` *diskdevice* [-f] *filename* [*format* [*read-only-mode*]]
     Change the medium for a removable disk device to point to *filename*. eg::
 
       (qemu) change ide1-cd0 /path/to/some.iso
 
+    ``-f``
+      forces the operation even if the guest has locked the tray.
+
     *format* is optional.
 
     *read-only-mode* may be used to change the read-only status of the device.
diff --git a/ui/cocoa.m b/ui/cocoa.m
index 68bff4ff37..09a62817f2 100644
--- a/ui/cocoa.m
+++ b/ui/cocoa.m
@@ -1531,6 +1531,7 @@  - (void)changeDeviceMedia:(id)sender
                                        [file cStringUsingEncoding:
                                                  NSASCIIStringEncoding],
                                        true, "raw",
+                                       true, false,
                                        false, 0,
                                        &err);
         });