@@ -51,7 +51,8 @@ typedef enum IRQType {
IRQ_TYPE_FSLSPECIAL, /* FSL timer/IPI interrupt, edge, no polarity */
} IRQType;
-/* Round up to the nearest 64 IRQs so that the queue length
+/*
+ * Round up to the nearest 64 IRQs so that the queue length
* won't change when moving between 32 and 64 bit hosts.
*/
#define IRQQUEUE_SIZE_BITS ((OPENPIC_MAX_IRQ + 63) & ~63)
@@ -101,8 +102,10 @@ typedef struct OpenPICTimer {
bool qemu_timer_active; /* Is the qemu_timer is running? */
struct QEMUTimer *qemu_timer;
struct OpenPICState *opp; /* Device timer is part of. */
- /* The QEMU_CLOCK_VIRTUAL time (in ns) corresponding to the last
- current_count written or read, only defined if qemu_timer_active. */
+ /*
+ * The QEMU_CLOCK_VIRTUAL time (in ns) corresponding to the last
+ * current_count written or read, only defined if qemu_timer_active.
+ */
uint64_t origin_time;
} OpenPICTimer;
@@ -47,7 +47,7 @@
#include "qemu/timer.h"
#include "qemu/error-report.h"
-//#define DEBUG_OPENPIC
+/* #define DEBUG_OPENPIC */
#ifdef DEBUG_OPENPIC
static const int debug_openpic = 1;
@@ -118,7 +118,8 @@ static FslMpicInfo fsl_mpic_42 = {
#define ILR_INTTGT_CINT 0x01 /* critical */
#define ILR_INTTGT_MCP 0x02 /* machine check */
-/* The currently supported INTTGT values happen to be the same as QEMU's
+/*
+ * The currently supported INTTGT values happen to be the same as QEMU's
* openpic output codes, but don't depend on this. The output codes
* could change (unlikely, but...) or support could be added for
* more INTTGT values.
@@ -177,10 +178,11 @@ static void openpic_cpu_write_internal(void *opaque, hwaddr addr,
uint32_t val, int idx);
static void openpic_reset(DeviceState *d);
-/* Convert between openpic clock ticks and nanosecs. In the hardware the clock
- frequency is driven by board inputs to the PIC which the PIC would then
- divide by 4 or 8. For now hard code to 25MZ.
-*/
+/*
+ * Convert between openpic clock ticks and nanosecs. In the hardware the clock
+ * frequency is driven by board inputs to the PIC which the PIC would then
+ * divide by 4 or 8. For now hard code to 25MZ.
+ */
#define OPENPIC_TIMER_FREQ_MHZ 25
#define OPENPIC_TIMER_NS_PER_TICK (1000 / OPENPIC_TIMER_FREQ_MHZ)
static inline uint64_t ns_to_ticks(uint64_t ns)
@@ -253,7 +255,8 @@ static void IRQ_local_pipe(OpenPICState *opp, int n_CPU, int n_IRQ,
__func__, src->output, n_IRQ, active, was_active,
dst->outputs_active[src->output]);
- /* On Freescale MPIC, critical interrupts ignore priority,
+ /*
+ * On Freescale MPIC, critical interrupts ignore priority,
* IACK, EOI, etc. Before MPIC v4.1 they also ignore
* masking.
*/
@@ -276,7 +279,8 @@ static void IRQ_local_pipe(OpenPICState *opp, int n_CPU, int n_IRQ,
priority = IVPR_PRIORITY(src->ivpr);
- /* Even if the interrupt doesn't have enough priority,
+ /*
+ * Even if the interrupt doesn't have enough priority,
* it is still raised, in case ctpr is lowered later.
*/
if (active) {
@@ -408,7 +412,8 @@ static void openpic_set_irq(void *opaque, int n_IRQ, int level)
}
if (src->output != OPENPIC_OUTPUT_INT) {
- /* Edge-triggered interrupts shouldn't be used
+ /*
+ * Edge-triggered interrupts shouldn't be used
* with non-INT delivery, but just in case,
* try to make it do something sane rather than
* cause an interrupt storm. This is close to
@@ -501,7 +506,8 @@ static inline void write_IRQreg_ivpr(OpenPICState *opp, int n_IRQ, uint32_t val)
{
uint32_t mask;
- /* NOTE when implementing newer FSL MPIC models: starting with v4.0,
+ /*
+ * NOTE when implementing newer FSL MPIC models: starting with v4.0,
* the polarity bit is read-only on internal interrupts.
*/
mask = IVPR_MASK_MASK | IVPR_PRIORITY_MASK | IVPR_SENSE_MASK |
@@ -511,7 +517,8 @@ static inline void write_IRQreg_ivpr(OpenPICState *opp, int n_IRQ, uint32_t val)
opp->src[n_IRQ].ivpr =
(opp->src[n_IRQ].ivpr & IVPR_ACTIVITY_MASK) | (val & mask);
- /* For FSL internal interrupts, The sense bit is reserved and zero,
+ /*
+ * For FSL internal interrupts, The sense bit is reserved and zero,
* and the interrupt is always level-triggered. Timers and IPIs
* have no sense or polarity bits, and are edge-triggered.
*/
@@ -695,16 +702,20 @@ static void qemu_timer_cb(void *opaque)
openpic_set_irq(opp, n_IRQ, 0);
}
-/* If enabled is true, arranges for an interrupt to be raised val clocks into
- the future, if enabled is false cancels the timer. */
+/*
+ * If enabled is true, arranges for an interrupt to be raised val clocks into
+ * the future, if enabled is false cancels the timer.
+ */
static void openpic_tmr_set_tmr(OpenPICTimer *tmr, uint32_t val, bool enabled)
{
uint64_t ns = ticks_to_ns(val & ~TCCR_TOG);
- /* A count of zero causes a timer to be set to expire immediately. This
- effectively stops the simulation since the timer is constantly expiring
- which prevents guest code execution, so we don't honor that
- configuration. On real hardware, this situation would generate an
- interrupt on every clock cycle if the interrupt was unmasked. */
+ /*
+ * A count of zero causes a timer to be set to expire immediately. This
+ * effectively stops the simulation since the timer is constantly expiring
+ * which prevents guest code execution, so we don't honor that
+ * configuration. On real hardware, this situation would generate an
+ * interrupt on every clock cycle if the interrupt was unmasked.
+ */
if ((ns == 0) || !enabled) {
tmr->qemu_timer_active = false;
tmr->tccr = tmr->tccr & TCCR_TOG;
@@ -717,8 +728,10 @@ static void openpic_tmr_set_tmr(OpenPICTimer *tmr, uint32_t val, bool enabled)
}
}
-/* Returns the currrent tccr value, i.e., timer value (in clocks) with
- appropriate TOG. */
+/*
+ * Returns the currrent tccr value, i.e., timer value (in clocks) with
+ * appropriate TOG.
+ */
static uint64_t openpic_tmr_get_timer(OpenPICTimer *tmr)
{
uint64_t retval;
@@ -1309,7 +1322,7 @@ static void openpic_reset(DeviceState *d)
typedef struct MemReg {
const char *name;
MemoryRegionOps const *ops;
- hwaddr start_addr;
+ hwaddr start_addr;
ram_addr_t size;
} MemReg;
Correct the multi-line comment format. No functional changes. Signed-off-by: Bin Meng <bin.meng@windriver.com> --- include/hw/ppc/openpic.h | 9 ++++--- hw/intc/openpic.c | 55 +++++++++++++++++++++++++--------------- 2 files changed, 40 insertions(+), 24 deletions(-)