diff mbox series

[10/10] pckbd: remove duplicated keyboard and mouse defines

Message ID 20210505192133.7480-10-vr_qemu@t-online.de
State New
Headers show
Series PS/2 controller related fixes | expand

Commit Message

Volker RĂ¼melin May 5, 2021, 7:21 p.m. UTC
In 2005 the author of commit daa579632d "PS2 mouse and keyboard
separation (Paul Brook)" and 0e43e99c04 "PS2 mouse and keyboard
separation (Paul Brook)" separated the PS/2 controller code and
the PS/2 keyboard and mouse code. It seems he forgot to remove
a few defines. Remove them now.

Signed-off-by: Volker RĂ¼melin <vr_qemu@t-online.de>
---
 hw/input/pckbd.c | 37 -------------------------------------
 1 file changed, 37 deletions(-)
diff mbox series

Patch

diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c
index 7c476f7a3e..a386457187 100644
--- a/hw/input/pckbd.c
+++ b/hw/input/pckbd.c
@@ -61,21 +61,6 @@ 
 #define KBD_CCMD_RESET          0xFE    /* Pulse bit 0 of the output port P2 = CPU reset. */
 #define KBD_CCMD_NO_OP          0xFF    /* Pulse no bits of the output port P2. */
 
-/* Keyboard Commands */
-#define KBD_CMD_SET_LEDS	0xED	/* Set keyboard leds */
-#define KBD_CMD_ECHO     	0xEE
-#define KBD_CMD_GET_ID 	        0xF2	/* get keyboard ID */
-#define KBD_CMD_SET_RATE	0xF3	/* Set typematic rate */
-#define KBD_CMD_ENABLE		0xF4	/* Enable scanning */
-#define KBD_CMD_RESET_DISABLE	0xF5	/* reset and disable scanning */
-#define KBD_CMD_RESET_ENABLE   	0xF6    /* reset and enable scanning */
-#define KBD_CMD_RESET		0xFF	/* Reset */
-
-/* Keyboard Replies */
-#define KBD_REPLY_POR		0xAA	/* Power on reset */
-#define KBD_REPLY_ACK		0xFA	/* Command ACK */
-#define KBD_REPLY_RESEND	0xFE	/* Command NACK, send the cmd again */
-
 /* Status Register Bits */
 #define KBD_STAT_OBF 		0x01	/* Keyboard output buffer full */
 #define KBD_STAT_IBF 		0x02	/* Keyboard input buffer full */
@@ -108,28 +93,6 @@ 
  */
 #define KBD_OUT_ONES            0xcc
 
-/* Mouse Commands */
-#define AUX_SET_SCALE11		0xE6	/* Set 1:1 scaling */
-#define AUX_SET_SCALE21		0xE7	/* Set 2:1 scaling */
-#define AUX_SET_RES		0xE8	/* Set resolution */
-#define AUX_GET_SCALE		0xE9	/* Get scaling factor */
-#define AUX_SET_STREAM		0xEA	/* Set stream mode */
-#define AUX_POLL		0xEB	/* Poll */
-#define AUX_RESET_WRAP		0xEC	/* Reset wrap mode */
-#define AUX_SET_WRAP		0xEE	/* Set wrap mode */
-#define AUX_SET_REMOTE		0xF0	/* Set remote mode */
-#define AUX_GET_TYPE		0xF2	/* Get type */
-#define AUX_SET_SAMPLE		0xF3	/* Set sample rate */
-#define AUX_ENABLE_DEV		0xF4	/* Enable aux device */
-#define AUX_DISABLE_DEV		0xF5	/* Disable aux device */
-#define AUX_SET_DEFAULT		0xF6
-#define AUX_RESET		0xFF	/* Reset aux device */
-#define AUX_ACK			0xFA	/* Command byte ACK. */
-
-#define MOUSE_STATUS_REMOTE     0x40
-#define MOUSE_STATUS_ENABLED    0x20
-#define MOUSE_STATUS_SCALE21    0x10
-
 #define KBD_PENDING_KBD_V3      0x01
 #define KBD_PENDING_AUX_V3      0x02
 #define KBD_PENDING_CTRL_KBD    0x04