| Message ID | 20210401132815.139575-3-mreitz@redhat.com |
|---|---|
| State | New |
| Headers | show |
| Series | iotests/qsd-jobs: Use common.qemu for the QSD | expand |
01.04.2021 16:28, Max Reitz wrote: > Using common.qemu allows us to wait for specific replies, so we can for > example wait for events. This allows starting the active commit job and > then wait for it to be ready before quitting the QSD, so we the output > is always the same. > > (Strictly speaking, this is only necessary for the first test in > qsd-jobs, but we might as well make the second one use common.qemu's > infrastructure, too.) > Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > Reported-by: Peter Maydell <peter.maydell@linaro.org> > Signed-off-by: Max Reitz <mreitz@redhat.com> > --- > tests/qemu-iotests/tests/qsd-jobs | 55 ++++++++++++++++++++------- > tests/qemu-iotests/tests/qsd-jobs.out | 10 ++++- > 2 files changed, 49 insertions(+), 16 deletions(-) > > diff --git a/tests/qemu-iotests/tests/qsd-jobs b/tests/qemu-iotests/tests/qsd-jobs > index 972b6b3898..af7f886f15 100755 > --- a/tests/qemu-iotests/tests/qsd-jobs > +++ b/tests/qemu-iotests/tests/qsd-jobs > @@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 > cd .. > . ./common.rc > . ./common.filter > +. ./common.qemu > > _supported_fmt qcow2 > _supported_proto generic > @@ -52,32 +53,58 @@ echo "=== Job still present at shutdown ===" > echo > > # Just make sure that this doesn't crash > -$QSD --chardev stdio,id=stdio --monitor chardev=stdio \ > +qsd=y _launch_qemu \ sounds a bit strange.. Like we are starting qemu. > --blockdev node-name=file0,driver=file,filename="$TEST_IMG" \ > - --blockdev node-name=fmt0,driver=qcow2,file=file0 <<EOF | _filter_qmp > -{"execute":"qmp_capabilities"} > -{"execute": "block-commit", "arguments": {"device": "fmt0", "job-id": "job0"}} > -{"execute": "quit"} > -EOF > + --blockdev node-name=fmt0,driver=qcow2,file=file0 > + > +_send_qemu_cmd \ > + $QEMU_HANDLE \ > + '{"execute":"qmp_capabilities"}' \ > + 'return' > + > +_send_qemu_cmd \ > + $QEMU_HANDLE \ > + '{"execute": "block-commit", > + "arguments": {"device": "fmt0", "job-id": "job0"}}' \ > + 'BLOCK_JOB_READY' > + > +_send_qemu_cmd \ > + $QEMU_HANDLE \ > + '{"execute": "quit"}' \ > + 'return' > + > +wait=y _cleanup_qemu > > echo > echo "=== Streaming can't get permission on base node ===" > echo > > # Just make sure that this doesn't crash > -$QSD --chardev stdio,id=stdio --monitor chardev=stdio \ > +qsd=y _launch_qemu \ > --blockdev node-name=file_base,driver=file,filename="$TEST_IMG.base" \ > --blockdev node-name=fmt_base,driver=qcow2,file=file_base \ > --blockdev node-name=file_overlay,driver=file,filename="$TEST_IMG" \ > --blockdev node-name=fmt_overlay,driver=qcow2,file=file_overlay,backing=fmt_base \ > --nbd-server addr.type=unix,addr.path="$SOCK_DIR/nbd.sock" \ > - --export type=nbd,id=export1,node-name=fmt_base,writable=on,name=export1 \ > - <<EOF | _filter_qmp > -{"execute": "qmp_capabilities"} > -{"execute": "block-stream", > - "arguments": {"device": "fmt_overlay", "job-id": "job0"}} > -{"execute": "quit"} > -EOF > + --export type=nbd,id=export1,node-name=fmt_base,writable=on,name=export1 > + > +_send_qemu_cmd \ > + $QEMU_HANDLE \ > + '{"execute": "qmp_capabilities"}' \ > + 'return' > + > +_send_qemu_cmd \ > + $QEMU_HANDLE \ > + '{"execute": "block-stream", > + "arguments": {"device": "fmt_overlay", "job-id": "job0"}}' \ > + 'error' > + > +_send_qemu_cmd \ > + $QEMU_HANDLE \ > + '{"execute": "quit"}' \ > + 'return' > + > +wait=y _cleanup_qemu > > # success, all done > echo "*** done" > diff --git a/tests/qemu-iotests/tests/qsd-jobs.out b/tests/qemu-iotests/tests/qsd-jobs.out > index 05e1165e80..5a14668939 100644 > --- a/tests/qemu-iotests/tests/qsd-jobs.out > +++ b/tests/qemu-iotests/tests/qsd-jobs.out > @@ -4,13 +4,16 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/ > > === Job still present at shutdown === > > -QMP_VERSION > +{"execute":"qmp_capabilities"} > {"return": {}} > +{"execute": "block-commit", > + "arguments": {"device": "fmt0", "job-id": "job0"}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "job0"}} > {"return": {}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "job0"}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_READY", "data": {"device": "job0", "len": 0, "offset": 0, "speed": 0, "type": "commit"}} > +{"execute": "quit"} > {"return": {}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "standby", "id": "job0"}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "job0"}} > @@ -22,11 +25,14 @@ QMP_VERSION > > === Streaming can't get permission on base node === > > -QMP_VERSION > +{"execute": "qmp_capabilities"} > {"return": {}} > +{"execute": "block-stream", > + "arguments": {"device": "fmt_overlay", "job-id": "job0"}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}} > {"error": {"class": "GenericError", "desc": "Conflicts with use by a block device as 'root', which uses 'write' on fmt_base"}} > +{"execute": "quit"} > {"return": {}} > {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_EXPORT_DELETED", "data": {"id": "export1"}} > *** done >
On 01.04.21 16:44, Vladimir Sementsov-Ogievskiy wrote: > 01.04.2021 16:28, Max Reitz wrote: >> Using common.qemu allows us to wait for specific replies, so we can for >> example wait for events. This allows starting the active commit job and >> then wait for it to be ready before quitting the QSD, so we the output >> is always the same. >> >> (Strictly speaking, this is only necessary for the first test in >> qsd-jobs, but we might as well make the second one use common.qemu's >> infrastructure, too.) >> > > Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > >> Reported-by: Peter Maydell <peter.maydell@linaro.org> >> Signed-off-by: Max Reitz <mreitz@redhat.com> >> --- >> tests/qemu-iotests/tests/qsd-jobs | 55 ++++++++++++++++++++------- >> tests/qemu-iotests/tests/qsd-jobs.out | 10 ++++- >> 2 files changed, 49 insertions(+), 16 deletions(-) >> >> diff --git a/tests/qemu-iotests/tests/qsd-jobs >> b/tests/qemu-iotests/tests/qsd-jobs >> index 972b6b3898..af7f886f15 100755 >> --- a/tests/qemu-iotests/tests/qsd-jobs >> +++ b/tests/qemu-iotests/tests/qsd-jobs >> @@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 >> cd .. >> . ./common.rc >> . ./common.filter >> +. ./common.qemu >> _supported_fmt qcow2 >> _supported_proto generic >> @@ -52,32 +53,58 @@ echo "=== Job still present at shutdown ===" >> echo >> # Just make sure that this doesn't crash >> -$QSD --chardev stdio,id=stdio --monitor chardev=stdio \ >> +qsd=y _launch_qemu \ > > sounds a bit strange.. Like we are starting qemu. Yeah, well. Yeah. We could have a _launch_qsd() { qsd=y _launch_qemu } But this would still make it weird for all the other commands from common.qemu, and I don’t think it makes much sense to introduce aliases for all of them. So I think it’d be best to live with that bit of weirdness. Max
diff --git a/tests/qemu-iotests/tests/qsd-jobs b/tests/qemu-iotests/tests/qsd-jobs index 972b6b3898..af7f886f15 100755 --- a/tests/qemu-iotests/tests/qsd-jobs +++ b/tests/qemu-iotests/tests/qsd-jobs @@ -38,6 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 cd .. . ./common.rc . ./common.filter +. ./common.qemu _supported_fmt qcow2 _supported_proto generic @@ -52,32 +53,58 @@ echo "=== Job still present at shutdown ===" echo # Just make sure that this doesn't crash -$QSD --chardev stdio,id=stdio --monitor chardev=stdio \ +qsd=y _launch_qemu \ --blockdev node-name=file0,driver=file,filename="$TEST_IMG" \ - --blockdev node-name=fmt0,driver=qcow2,file=file0 <<EOF | _filter_qmp -{"execute":"qmp_capabilities"} -{"execute": "block-commit", "arguments": {"device": "fmt0", "job-id": "job0"}} -{"execute": "quit"} -EOF + --blockdev node-name=fmt0,driver=qcow2,file=file0 + +_send_qemu_cmd \ + $QEMU_HANDLE \ + '{"execute":"qmp_capabilities"}' \ + 'return' + +_send_qemu_cmd \ + $QEMU_HANDLE \ + '{"execute": "block-commit", + "arguments": {"device": "fmt0", "job-id": "job0"}}' \ + 'BLOCK_JOB_READY' + +_send_qemu_cmd \ + $QEMU_HANDLE \ + '{"execute": "quit"}' \ + 'return' + +wait=y _cleanup_qemu echo echo "=== Streaming can't get permission on base node ===" echo # Just make sure that this doesn't crash -$QSD --chardev stdio,id=stdio --monitor chardev=stdio \ +qsd=y _launch_qemu \ --blockdev node-name=file_base,driver=file,filename="$TEST_IMG.base" \ --blockdev node-name=fmt_base,driver=qcow2,file=file_base \ --blockdev node-name=file_overlay,driver=file,filename="$TEST_IMG" \ --blockdev node-name=fmt_overlay,driver=qcow2,file=file_overlay,backing=fmt_base \ --nbd-server addr.type=unix,addr.path="$SOCK_DIR/nbd.sock" \ - --export type=nbd,id=export1,node-name=fmt_base,writable=on,name=export1 \ - <<EOF | _filter_qmp -{"execute": "qmp_capabilities"} -{"execute": "block-stream", - "arguments": {"device": "fmt_overlay", "job-id": "job0"}} -{"execute": "quit"} -EOF + --export type=nbd,id=export1,node-name=fmt_base,writable=on,name=export1 + +_send_qemu_cmd \ + $QEMU_HANDLE \ + '{"execute": "qmp_capabilities"}' \ + 'return' + +_send_qemu_cmd \ + $QEMU_HANDLE \ + '{"execute": "block-stream", + "arguments": {"device": "fmt_overlay", "job-id": "job0"}}' \ + 'error' + +_send_qemu_cmd \ + $QEMU_HANDLE \ + '{"execute": "quit"}' \ + 'return' + +wait=y _cleanup_qemu # success, all done echo "*** done" diff --git a/tests/qemu-iotests/tests/qsd-jobs.out b/tests/qemu-iotests/tests/qsd-jobs.out index 05e1165e80..5a14668939 100644 --- a/tests/qemu-iotests/tests/qsd-jobs.out +++ b/tests/qemu-iotests/tests/qsd-jobs.out @@ -4,13 +4,16 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/ === Job still present at shutdown === -QMP_VERSION +{"execute":"qmp_capabilities"} {"return": {}} +{"execute": "block-commit", + "arguments": {"device": "fmt0", "job-id": "job0"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "job0"}} {"return": {}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "job0"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_READY", "data": {"device": "job0", "len": 0, "offset": 0, "speed": 0, "type": "commit"}} +{"execute": "quit"} {"return": {}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "standby", "id": "job0"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "job0"}} @@ -22,11 +25,14 @@ QMP_VERSION === Streaming can't get permission on base node === -QMP_VERSION +{"execute": "qmp_capabilities"} {"return": {}} +{"execute": "block-stream", + "arguments": {"device": "fmt_overlay", "job-id": "job0"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}} {"error": {"class": "GenericError", "desc": "Conflicts with use by a block device as 'root', which uses 'write' on fmt_base"}} +{"execute": "quit"} {"return": {}} {"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_EXPORT_DELETED", "data": {"id": "export1"}} *** done
Using common.qemu allows us to wait for specific replies, so we can for example wait for events. This allows starting the active commit job and then wait for it to be ready before quitting the QSD, so we the output is always the same. (Strictly speaking, this is only necessary for the first test in qsd-jobs, but we might as well make the second one use common.qemu's infrastructure, too.) Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Max Reitz <mreitz@redhat.com> --- tests/qemu-iotests/tests/qsd-jobs | 55 ++++++++++++++++++++------- tests/qemu-iotests/tests/qsd-jobs.out | 10 ++++- 2 files changed, 49 insertions(+), 16 deletions(-)