| Message ID | 20201105221905.1350-6-dbuono@linux.vnet.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v3,1/9] fuzz: Make fork_fuzz.ld compatible with LLVM's LLD | expand |
On 11/5/20 11:19 PM, Daniele Buono wrote: > scsi_disk_new_request_dump is used to dump the content of a scsi request > for tracing. It does that by decoding the command to get the size of the > command buffer, and then printing the content of such buffer on a string. > > When using gcc with link-time optimizations, it warns that the argument of > malloc may be too large. > > In function 'scsi_disk_new_request_dump', > inlined from 'scsi_new_request' at ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2588:9: > ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2562:17: warning: argument 1 value '18446744073709551612' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] > line_buffer = g_malloc(len * 5 + 1); > ^ > ../qemu-cfi-v3/hw/scsi/scsi-disk.c: In function 'scsi_new_request': > /usr/include/glib-2.0/glib/gmem.h:78:10: note: in a call to allocation function 'g_malloc' declared here > gpointer g_malloc (gsize n_bytes) G_GNUC_MALLOC G_GNUC_ALLOC_SIZE(1); > > len is a signed integer filled up by scsi_cdb_length which can return -1 > if it can't decode the command. In this case, g_malloc would probably fail. > However, an unknown command here is a possibility, and since this is used for > tracing, we should try to print the command anyway, for debugging purposes. > > Since knowing the size of the command in the buffer is impossible (could not > decode the command), only print the header by setting len=1 if scsi_cdb_length > returned -1 > > Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com> > --- > If we had a way to know the (maximum) size of the buffer, we could > alternatively dump the whole buffer, instead of dumping only the > first byte. Not sure if this can be done, nor if it is considered > a better option. > > We could also produce an error instead/in addition to just dumping > the buffer, if the command cannot be decoded. > > hw/scsi/scsi-disk.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c > index e859534eaf..d70dfdd9dc 100644 > --- a/hw/scsi/scsi-disk.c > +++ b/hw/scsi/scsi-disk.c > @@ -2559,6 +2559,10 @@ static void scsi_disk_new_request_dump(uint32_t lun, uint32_t tag, uint8_t *buf) > int len = scsi_cdb_length(buf); > char *line_buffer, *p; > > + if (len < 0) { > + len = 1; > + } > + > line_buffer = g_malloc(len * 5 + 1); > > for (i = 0, p = line_buffer; i < len; i++) { > I think scsi_cdb_length() should always return >=1, and scsi_req_parse_cdb() return if len <= 1.
On 11/6/20 3:32 PM, Philippe Mathieu-Daudé wrote: > On 11/5/20 11:19 PM, Daniele Buono wrote: >> scsi_disk_new_request_dump is used to dump the content of a scsi request >> for tracing. It does that by decoding the command to get the size of the >> command buffer, and then printing the content of such buffer on a string. >> >> When using gcc with link-time optimizations, it warns that the argument of >> malloc may be too large. >> >> In function 'scsi_disk_new_request_dump', >> inlined from 'scsi_new_request' at ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2588:9: >> ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2562:17: warning: argument 1 value '18446744073709551612' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] >> line_buffer = g_malloc(len * 5 + 1); >> ^ >> ../qemu-cfi-v3/hw/scsi/scsi-disk.c: In function 'scsi_new_request': >> /usr/include/glib-2.0/glib/gmem.h:78:10: note: in a call to allocation function 'g_malloc' declared here >> gpointer g_malloc (gsize n_bytes) G_GNUC_MALLOC G_GNUC_ALLOC_SIZE(1); >> >> len is a signed integer filled up by scsi_cdb_length which can return -1 >> if it can't decode the command. In this case, g_malloc would probably fail. >> However, an unknown command here is a possibility, and since this is used for >> tracing, we should try to print the command anyway, for debugging purposes. >> >> Since knowing the size of the command in the buffer is impossible (could not >> decode the command), only print the header by setting len=1 if scsi_cdb_length >> returned -1 >> >> Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com> >> --- >> If we had a way to know the (maximum) size of the buffer, we could >> alternatively dump the whole buffer, instead of dumping only the >> first byte. Not sure if this can be done, nor if it is considered >> a better option. >> >> We could also produce an error instead/in addition to just dumping >> the buffer, if the command cannot be decoded. >> >> hw/scsi/scsi-disk.c | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c >> index e859534eaf..d70dfdd9dc 100644 >> --- a/hw/scsi/scsi-disk.c >> +++ b/hw/scsi/scsi-disk.c >> @@ -2559,6 +2559,10 @@ static void scsi_disk_new_request_dump(uint32_t lun, uint32_t tag, uint8_t *buf) >> int len = scsi_cdb_length(buf); >> char *line_buffer, *p; >> >> + if (len < 0) { >> + len = 1; >> + } >> + >> line_buffer = g_malloc(len * 5 + 1); >> >> for (i = 0, p = line_buffer; i < len; i++) { >> > > I think scsi_cdb_length() should always return >=1, > and scsi_req_parse_cdb() return if len <= 1. Looking at how this works, scsi_req_new() shouldn't take only a pointer to buffer without knowing its size... We should add a buflen argument and propagate it. Then we can check if scsi_cdb_length() <= buflen, and dump buflen if unknown opcode. Regards, Phil.
On 11/6/20 3:43 PM, Philippe Mathieu-Daudé wrote: > On 11/6/20 3:32 PM, Philippe Mathieu-Daudé wrote: >> On 11/5/20 11:19 PM, Daniele Buono wrote: >>> scsi_disk_new_request_dump is used to dump the content of a scsi request >>> for tracing. It does that by decoding the command to get the size of the >>> command buffer, and then printing the content of such buffer on a string. >>> >>> When using gcc with link-time optimizations, it warns that the argument of >>> malloc may be too large. >>> >>> In function 'scsi_disk_new_request_dump', >>> inlined from 'scsi_new_request' at ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2588:9: >>> ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2562:17: warning: argument 1 value '18446744073709551612' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] >>> line_buffer = g_malloc(len * 5 + 1); >>> ^ >>> ../qemu-cfi-v3/hw/scsi/scsi-disk.c: In function 'scsi_new_request': >>> /usr/include/glib-2.0/glib/gmem.h:78:10: note: in a call to allocation function 'g_malloc' declared here >>> gpointer g_malloc (gsize n_bytes) G_GNUC_MALLOC G_GNUC_ALLOC_SIZE(1); >>> >>> len is a signed integer filled up by scsi_cdb_length which can return -1 >>> if it can't decode the command. In this case, g_malloc would probably fail. >>> However, an unknown command here is a possibility, and since this is used for >>> tracing, we should try to print the command anyway, for debugging purposes. >>> >>> Since knowing the size of the command in the buffer is impossible (could not >>> decode the command), only print the header by setting len=1 if scsi_cdb_length >>> returned -1 >>> >>> Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com> >>> --- >>> If we had a way to know the (maximum) size of the buffer, we could >>> alternatively dump the whole buffer, instead of dumping only the >>> first byte. Not sure if this can be done, nor if it is considered >>> a better option. >>> >>> We could also produce an error instead/in addition to just dumping >>> the buffer, if the command cannot be decoded. >>> >>> hw/scsi/scsi-disk.c | 4 ++++ >>> 1 file changed, 4 insertions(+) >>> >>> diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c >>> index e859534eaf..d70dfdd9dc 100644 >>> --- a/hw/scsi/scsi-disk.c >>> +++ b/hw/scsi/scsi-disk.c >>> @@ -2559,6 +2559,10 @@ static void scsi_disk_new_request_dump(uint32_t lun, uint32_t tag, uint8_t *buf) >>> int len = scsi_cdb_length(buf); >>> char *line_buffer, *p; >>> >>> + if (len < 0) { >>> + len = 1; >>> + } >>> + >>> line_buffer = g_malloc(len * 5 + 1); >>> >>> for (i = 0, p = line_buffer; i < len; i++) { >>> >> >> I think scsi_cdb_length() should always return >=1, >> and scsi_req_parse_cdb() return if len <= 1. > > Looking at how this works, scsi_req_new() shouldn't take > only a pointer to buffer without knowing its size... > We should add a buflen argument and propagate it. > > Then we can check if scsi_cdb_length() <= buflen, > and dump buflen if unknown opcode. I did it. Will post later as this is 6.0 material. > > Regards, > > Phil. > >
Hi Philippe,
Since you have a patch upcoming, may I drop this patch
from this set?
Daniele
On 11/9/2020 8:26 AM, Philippe Mathieu-Daudé wrote:
> I did it. Will post later as this is 6.0 material.
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c index e859534eaf..d70dfdd9dc 100644 --- a/hw/scsi/scsi-disk.c +++ b/hw/scsi/scsi-disk.c @@ -2559,6 +2559,10 @@ static void scsi_disk_new_request_dump(uint32_t lun, uint32_t tag, uint8_t *buf) int len = scsi_cdb_length(buf); char *line_buffer, *p; + if (len < 0) { + len = 1; + } + line_buffer = g_malloc(len * 5 + 1); for (i = 0, p = line_buffer; i < len; i++) {
scsi_disk_new_request_dump is used to dump the content of a scsi request for tracing. It does that by decoding the command to get the size of the command buffer, and then printing the content of such buffer on a string. When using gcc with link-time optimizations, it warns that the argument of malloc may be too large. In function 'scsi_disk_new_request_dump', inlined from 'scsi_new_request' at ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2588:9: ../qemu-cfi-v3/hw/scsi/scsi-disk.c:2562:17: warning: argument 1 value '18446744073709551612' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] line_buffer = g_malloc(len * 5 + 1); ^ ../qemu-cfi-v3/hw/scsi/scsi-disk.c: In function 'scsi_new_request': /usr/include/glib-2.0/glib/gmem.h:78:10: note: in a call to allocation function 'g_malloc' declared here gpointer g_malloc (gsize n_bytes) G_GNUC_MALLOC G_GNUC_ALLOC_SIZE(1); len is a signed integer filled up by scsi_cdb_length which can return -1 if it can't decode the command. In this case, g_malloc would probably fail. However, an unknown command here is a possibility, and since this is used for tracing, we should try to print the command anyway, for debugging purposes. Since knowing the size of the command in the buffer is impossible (could not decode the command), only print the header by setting len=1 if scsi_cdb_length returned -1 Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com> --- If we had a way to know the (maximum) size of the buffer, we could alternatively dump the whole buffer, instead of dumping only the first byte. Not sure if this can be done, nor if it is considered a better option. We could also produce an error instead/in addition to just dumping the buffer, if the command cannot be decoded. hw/scsi/scsi-disk.c | 4 ++++ 1 file changed, 4 insertions(+)