diff mbox series

hw/block/nvme: fix aer logic

Message ID 20201019065416.34638-1-its@irrelevant.dk
State New
Headers show
Series hw/block/nvme: fix aer logic | expand

Commit Message

Klaus Jensen Oct. 19, 2020, 6:54 a.m. UTC
From: Klaus Jensen <k.jensen@samsung.com>

Fix same flawed logic in the handling of event masking. Before this
patch the device would erroneously

  a) queue up events even though that event type is masked
  b) issue AERs for queued events in response to events getting cleared
  c) respond to new AERs with queued events even though the event was
     already cleared

Fix this by moving the mask check to nvme_enqueue_event() and replace
the nvme_process_aers() call with a pruning of queued events when the
event type is cleared.

Fixes: 5d5a53302b95 ("hw/block/nvme: add support for the asynchronous event request command")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
---
 hw/block/nvme.c       | 22 ++++++++++++++--------
 hw/block/trace-events |  2 +-
 2 files changed, 15 insertions(+), 9 deletions(-)

Comments

Keith Busch Oct. 19, 2020, 4:43 p.m. UTC | #1
On Mon, Oct 19, 2020 at 08:54:16AM +0200, Klaus Jensen wrote:
> @@ -844,6 +838,12 @@ static void nvme_enqueue_event(NvmeCtrl *n, uint8_t event_type,
>          return;
>      }
>  
> +    /* ignore if masked (cqe posted, but event not cleared) */
> +    if (n->aer_mask & (1 << event_type)) {
> +        trace_pci_nvme_aer_masked(event_type, n->aer_mask);
> +        return;
> +    }

The 'mask' means the host hasn't yet acknowledged the AER with the
appropriate log. The controller should continue to internally enqueue
subsequent events of this type, but suppress sending the notification
for them until the host unlatches the event type.

>      event = g_new(NvmeAsyncEvent, 1);
>      event->result = (NvmeAerResult) {
>          .event_type = event_type,
> @@ -859,9 +859,15 @@ static void nvme_enqueue_event(NvmeCtrl *n, uint8_t event_type,
>  
>  static void nvme_clear_events(NvmeCtrl *n, uint8_t event_type)
>  {
> +    NvmeAsyncEvent *event, *next;
> +
>      n->aer_mask &= ~(1 << event_type);
> -    if (!QTAILQ_EMPTY(&n->aer_queue)) {
> -        nvme_process_aers(n);
> +
> +    QTAILQ_FOREACH_SAFE(event, &n->aer_queue, entry, next) {
> +        if (event->result.event_type == event_type) {
> +            QTAILQ_REMOVE(&n->aer_queue, event, entry);

Memory leaking the 'event'?

> +            n->aer_queued--;
> +        }
>      }
>  }
Klaus Jensen Oct. 19, 2020, 5:48 p.m. UTC | #2
On Oct 19 09:43, Keith Busch wrote:
> On Mon, Oct 19, 2020 at 08:54:16AM +0200, Klaus Jensen wrote:
> > @@ -844,6 +838,12 @@ static void nvme_enqueue_event(NvmeCtrl *n, uint8_t event_type,
> >          return;
> >      }
> >  
> > +    /* ignore if masked (cqe posted, but event not cleared) */
> > +    if (n->aer_mask & (1 << event_type)) {
> > +        trace_pci_nvme_aer_masked(event_type, n->aer_mask);
> > +        return;
> > +    }
> 
> The 'mask' means the host hasn't yet acknowledged the AER with the
> appropriate log. The controller should continue to internally enqueue
> subsequent events of this type, but suppress sending the notification
> for them until the host unlatches the event type.
> 

Ugh. Looks like you are right. Again.

Notice events are definitely a good case for when we want to queue up
the events internally since the information correspond to different log
pages but use the same type.

> >      event = g_new(NvmeAsyncEvent, 1);
> >      event->result = (NvmeAerResult) {
> >          .event_type = event_type,
> > @@ -859,9 +859,15 @@ static void nvme_enqueue_event(NvmeCtrl *n, uint8_t event_type,
> >  
> >  static void nvme_clear_events(NvmeCtrl *n, uint8_t event_type)
> >  {
> > +    NvmeAsyncEvent *event, *next;
> > +
> >      n->aer_mask &= ~(1 << event_type);
> > -    if (!QTAILQ_EMPTY(&n->aer_queue)) {
> > -        nvme_process_aers(n);
> > +
> > +    QTAILQ_FOREACH_SAFE(event, &n->aer_queue, entry, next) {
> > +        if (event->result.event_type == event_type) {
> > +            QTAILQ_REMOVE(&n->aer_queue, event, entry);
> 
> Memory leaking the 'event'?
> 

Thanks, good catch, but this change is also irrelevant now.

> > +            n->aer_queued--;
> > +        }
> >      }
> >  }
>
diff mbox series

Patch

diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 9d30ca69dcf1..b18a310d9271 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -805,12 +805,6 @@  static void nvme_process_aers(void *opaque)
             break;
         }
 
-        /* ignore if masked (cqe posted, but event not cleared) */
-        if (n->aer_mask & (1 << event->result.event_type)) {
-            trace_pci_nvme_aer_masked(event->result.event_type, n->aer_mask);
-            continue;
-        }
-
         QTAILQ_REMOVE(&n->aer_queue, event, entry);
         n->aer_queued--;
 
@@ -844,6 +838,12 @@  static void nvme_enqueue_event(NvmeCtrl *n, uint8_t event_type,
         return;
     }
 
+    /* ignore if masked (cqe posted, but event not cleared) */
+    if (n->aer_mask & (1 << event_type)) {
+        trace_pci_nvme_aer_masked(event_type, n->aer_mask);
+        return;
+    }
+
     event = g_new(NvmeAsyncEvent, 1);
     event->result = (NvmeAerResult) {
         .event_type = event_type,
@@ -859,9 +859,15 @@  static void nvme_enqueue_event(NvmeCtrl *n, uint8_t event_type,
 
 static void nvme_clear_events(NvmeCtrl *n, uint8_t event_type)
 {
+    NvmeAsyncEvent *event, *next;
+
     n->aer_mask &= ~(1 << event_type);
-    if (!QTAILQ_EMPTY(&n->aer_queue)) {
-        nvme_process_aers(n);
+
+    QTAILQ_FOREACH_SAFE(event, &n->aer_queue, entry, next) {
+        if (event->result.event_type == event_type) {
+            QTAILQ_REMOVE(&n->aer_queue, event, entry);
+            n->aer_queued--;
+        }
     }
 }
 
diff --git a/hw/block/trace-events b/hw/block/trace-events
index cab9913b1f2d..11bad6ae6a11 100644
--- a/hw/block/trace-events
+++ b/hw/block/trace-events
@@ -67,7 +67,7 @@  pci_nvme_aer_post_cqe(uint8_t typ, uint8_t info, uint8_t log_page) "type 0x%"PRI
 pci_nvme_enqueue_event(uint8_t typ, uint8_t info, uint8_t log_page) "type 0x%"PRIx8" info 0x%"PRIx8" lid 0x%"PRIx8""
 pci_nvme_enqueue_event_noqueue(int queued) "queued %d"
 pci_nvme_enqueue_event_masked(uint8_t typ) "type 0x%"PRIx8""
-pci_nvme_no_outstanding_aers(void) "ignoring event; no outstanding AERs"
+pci_nvme_no_outstanding_aers(void) "no outstanding aers"
 pci_nvme_enqueue_req_completion(uint16_t cid, uint16_t cqid, uint16_t status) "cid %"PRIu16" cqid %"PRIu16" status 0x%"PRIx16""
 pci_nvme_mmio_read(uint64_t addr) "addr 0x%"PRIx64""
 pci_nvme_mmio_write(uint64_t addr, uint64_t data) "addr 0x%"PRIx64" data 0x%"PRIx64""