[v2,15/16] nvme: factor out cmb setup

From: Klaus Jensen <k.jensen@samsung.com>

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/block/nvme.c | 49 +++++++++++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 22 deletions(-)

On Wed, 2020-04-15 at 15:01 +0200, Klaus Jensen wrote:
> From: Klaus Jensen <k.jensen@samsung.com>
> 
> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
>  hw/block/nvme.c | 49 +++++++++++++++++++++++++++----------------------
>  1 file changed, 27 insertions(+), 22 deletions(-)
> 
> diff --git a/hw/block/nvme.c b/hw/block/nvme.c
> index 906ae595025a..4c28d75e0fc8 100644
> --- a/hw/block/nvme.c
> +++ b/hw/block/nvme.c
> @@ -46,6 +46,7 @@
>  
>  #define NVME_REG_SIZE 0x1000
>  #define NVME_DB_SIZE  4
> +#define NVME_CMB_BIR 2
>  
>  #define NVME_GUEST_ERR(trace, fmt, ...) \
>      do { \
> @@ -1379,6 +1380,28 @@ static void nvme_init_namespace(NvmeCtrl *n, NvmeNamespace *ns, Error **errp)
>      id_ns->nuse = id_ns->ncap;
>  }
>  
> +static void nvme_init_cmb(NvmeCtrl *n, PCIDevice *pci_dev)
> +{
> +    NVME_CMBLOC_SET_BIR(n->bar.cmbloc, NVME_CMB_BIR);
> +    NVME_CMBLOC_SET_OFST(n->bar.cmbloc, 0);
> +
> +    NVME_CMBSZ_SET_SQS(n->bar.cmbsz, 1);
> +    NVME_CMBSZ_SET_CQS(n->bar.cmbsz, 0);
> +    NVME_CMBSZ_SET_LISTS(n->bar.cmbsz, 0);
> +    NVME_CMBSZ_SET_RDS(n->bar.cmbsz, 1);
> +    NVME_CMBSZ_SET_WDS(n->bar.cmbsz, 1);
> +    NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2); /* MBs */
> +    NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
> +
> +    n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> +    memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
> +                          "nvme-cmb", NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> +    pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
> +                     PCI_BASE_ADDRESS_SPACE_MEMORY |
> +                     PCI_BASE_ADDRESS_MEM_TYPE_64 |
> +                     PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
> +}
> +
>  static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
>  {
>      uint8_t *pci_conf = pci_dev->config;
> @@ -1393,6 +1416,10 @@ static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
>      pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
>                       PCI_BASE_ADDRESS_MEM_TYPE_64, &n->iomem);
>      msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
> +
> +    if (n->params.cmb_size_mb) {
> +        nvme_init_cmb(n, pci_dev);
> +    }
>  }
>  
>  static void nvme_realize(PCIDevice *pci_dev, Error **errp)
> @@ -1454,28 +1481,6 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
>      n->bar.vs = 0x00010200;
>      n->bar.intmc = n->bar.intms = 0;
>  
> -    if (n->params.cmb_size_mb) {
> -
> -        NVME_CMBLOC_SET_BIR(n->bar.cmbloc, 2);
> -        NVME_CMBLOC_SET_OFST(n->bar.cmbloc, 0);
> -
> -        NVME_CMBSZ_SET_SQS(n->bar.cmbsz, 1);
> -        NVME_CMBSZ_SET_CQS(n->bar.cmbsz, 0);
> -        NVME_CMBSZ_SET_LISTS(n->bar.cmbsz, 0);
> -        NVME_CMBSZ_SET_RDS(n->bar.cmbsz, 1);
> -        NVME_CMBSZ_SET_WDS(n->bar.cmbsz, 1);
> -        NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2); /* MBs */
> -        NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
> -
> -        n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> -        memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
> -                              "nvme-cmb", NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
> -        pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
> -            PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64 |
> -            PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
> -
> -    }
> -
>      for (i = 0; i < n->num_namespaces; i++) {
>          nvme_init_namespace(n, &n->namespaces[i], &err);
>          if (err) {

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>

Best regards,
	Maxim Levitsky