| Message ID | 20170829165058.8229-1-kchamart@redhat.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v3] qemu-iotests: Extend non-shared storage migration test (194) | expand |
On Tue, Aug 29, 2017 at 5:50 PM, Kashyap Chamarthy <kchamart@redhat.com> wrote: > This is the follow-up patch that was discussed[*] as part of feedback to > qemu-iotest 194. > > Changes in this patch: > > - Supply 'job-id' parameter to `drive-mirror` invocation. > > - Once migration completes, issue QMP `block-job-cancel` command on > the source QEMU to gracefully complete `drive-mirror` operation. > > - Once the BLOCK_JOB_COMPLETED event is emitted, stop the NBD server > on the destination QEMU. > > - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED. > > With the above, the test will also be (almost) in sync with the > procedure outlined in the document 'live-block-operations.rst'[+] > (section: "QMP invocation for live storage migration with > ``drive-mirror`` + NBD"). > > [*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html > -- qemu-iotests: add 194 non-shared storage migration test > [+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst > > Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> > --- > Changes in v3: > - Wait for migration to complete before issuing `block-job-cancel` > (StefanH) > - Wait for the event BLOCK_JOB_COMPLETED on the source before stopping > the NBD server on the destination (StefanH) > > Changes in v2: > - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED (EricB) > --- > tests/qemu-iotests/194 | 23 +++++++++++++++++------ > tests/qemu-iotests/194.out | 11 ++++++++--- > 2 files changed, 25 insertions(+), 9 deletions(-) Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
On 08/29/2017 12:42 PM, Stefan Hajnoczi wrote: > On Tue, Aug 29, 2017 at 5:50 PM, Kashyap Chamarthy <kchamart@redhat.com> wrote: >> This is the follow-up patch that was discussed[*] as part of feedback to >> qemu-iotest 194. >> >> Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> >> --- >> Changes in v3: >> - Wait for migration to complete before issuing `block-job-cancel` >> (StefanH) >> - Wait for the event BLOCK_JOB_COMPLETED on the source before stopping >> the NBD server on the destination (StefanH) >> >> Changes in v2: >> - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED (EricB) >> --- >> tests/qemu-iotests/194 | 23 +++++++++++++++++------ >> tests/qemu-iotests/194.out | 11 ++++++++--- >> 2 files changed, 25 insertions(+), 9 deletions(-) > > Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Thanks; I've added this to my NBD queue (pull request to come shortly after 2.11 release is finalized), since the test uses NBD.
On Tue, Aug 29, 2017 at 04:16:54PM -0500, Eric Blake wrote: > On 08/29/2017 12:42 PM, Stefan Hajnoczi wrote: > > On Tue, Aug 29, 2017 at 5:50 PM, Kashyap Chamarthy <kchamart@redhat.com> wrote: > >> This is the follow-up patch that was discussed[*] as part of feedback to > >> qemu-iotest 194. > >> > > >> Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> > >> --- > >> Changes in v3: > >> - Wait for migration to complete before issuing `block-job-cancel` > >> (StefanH) > >> - Wait for the event BLOCK_JOB_COMPLETED on the source before stopping > >> the NBD server on the destination (StefanH) > >> > >> Changes in v2: > >> - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED (EricB) > >> --- > >> tests/qemu-iotests/194 | 23 +++++++++++++++++------ > >> tests/qemu-iotests/194.out | 11 ++++++++--- > >> 2 files changed, 25 insertions(+), 9 deletions(-) > > > > Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> > > Thanks; I've added this to my NBD queue (pull request to come shortly > after 2.11 release is finalized), since the test uses NBD. Sure, thanks for the quick reviews, both!
diff --git a/tests/qemu-iotests/194 b/tests/qemu-iotests/194 index 8028111e21bed5cf4a2e8e32dc04aa5a9ea9caca..a3e3bad664b9d6aada7fbcbe7db907408a7c06de 100755 --- a/tests/qemu-iotests/194 +++ b/tests/qemu-iotests/194 @@ -46,16 +46,17 @@ iotests.log('Launching NBD server on destination...') iotests.log(dest_vm.qmp('nbd-server-start', addr={'type': 'unix', 'data': {'path': nbd_sock_path}})) iotests.log(dest_vm.qmp('nbd-server-add', device='drive0', writable=True)) -iotests.log('Starting drive-mirror on source...') +iotests.log('Starting `drive-mirror` on source...') iotests.log(source_vm.qmp( 'drive-mirror', device='drive0', target='nbd+unix:///drive0?socket={0}'.format(nbd_sock_path), sync='full', format='raw', # always raw, the server handles the format - mode='existing')) + mode='existing', + job_id='mirror-job0')) -iotests.log('Waiting for drive-mirror to complete...') +iotests.log('Waiting for `drive-mirror` to complete...') iotests.log(source_vm.event_wait('BLOCK_JOB_READY'), filters=[iotests.filter_qmp_event]) @@ -67,7 +68,17 @@ dest_vm.qmp('migrate-set-capabilities', iotests.log(source_vm.qmp('migrate', uri='unix:{0}'.format(migration_sock_path))) while True: - event = source_vm.event_wait('MIGRATION') - iotests.log(event, filters=[iotests.filter_qmp_event]) - if event['data']['status'] in ('completed', 'failed'): + event1 = source_vm.event_wait('MIGRATION') + iotests.log(event1, filters=[iotests.filter_qmp_event]) + if event1['data']['status'] in ('completed', 'failed'): + iotests.log('Gracefully ending the `drive-mirror` job on source...') + iotests.log(source_vm.qmp('block-job-cancel', device='mirror-job0')) + break + +while True: + event2 = source_vm.event_wait('BLOCK_JOB_COMPLETED') + iotests.log(event2, filters=[iotests.filter_qmp_event]) + if event2['event'] == 'BLOCK_JOB_COMPLETED': + iotests.log('Stopping the NBD server on destination...') + iotests.log(dest_vm.qmp('nbd-server-stop')) break diff --git a/tests/qemu-iotests/194.out b/tests/qemu-iotests/194.out index ae501fecacb706b1851cb9063ce9c9d5a28bb7ea..50ac50da5e7736912cbbc1825ae5629b15f0e3fe 100644 --- a/tests/qemu-iotests/194.out +++ b/tests/qemu-iotests/194.out @@ -2,12 +2,17 @@ Launching VMs... Launching NBD server on destination... {u'return': {}} {u'return': {}} -Starting drive-mirror on source... +Starting `drive-mirror` on source... {u'return': {}} -Waiting for drive-mirror to complete... -{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'drive0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_READY'} +Waiting for `drive-mirror` to complete... +{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'mirror-job0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_READY'} Starting migration... {u'return': {}} {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'setup'}, u'event': u'MIGRATION'} {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'active'}, u'event': u'MIGRATION'} {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'completed'}, u'event': u'MIGRATION'} +Gracefully ending the `drive-mirror` job on source... +{u'return': {}} +{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'mirror-job0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_COMPLETED'} +Stopping the NBD server on destination... +{u'return': {}}
This is the follow-up patch that was discussed[*] as part of feedback to qemu-iotest 194. Changes in this patch: - Supply 'job-id' parameter to `drive-mirror` invocation. - Once migration completes, issue QMP `block-job-cancel` command on the source QEMU to gracefully complete `drive-mirror` operation. - Once the BLOCK_JOB_COMPLETED event is emitted, stop the NBD server on the destination QEMU. - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED. With the above, the test will also be (almost) in sync with the procedure outlined in the document 'live-block-operations.rst'[+] (section: "QMP invocation for live storage migration with ``drive-mirror`` + NBD"). [*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html -- qemu-iotests: add 194 non-shared storage migration test [+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> --- Changes in v3: - Wait for migration to complete before issuing `block-job-cancel` (StefanH) - Wait for the event BLOCK_JOB_COMPLETED on the source before stopping the NBD server on the destination (StefanH) Changes in v2: - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED (EricB) --- tests/qemu-iotests/194 | 23 +++++++++++++++++------ tests/qemu-iotests/194.out | 11 ++++++++--- 2 files changed, 25 insertions(+), 9 deletions(-)