@@ -700,6 +700,7 @@ void smp_probe(void)
#define PCI_COMMAND 0x04 /* 16 bits */
#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
+#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
#define PCI_CLASS_DEVICE 0x0a /* Device class */
#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
@@ -767,7 +768,6 @@ static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr)
static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr)
{
- uint16_t cmd;
uint32_t ofs, old_addr;
if ( region_num == PCI_ROM_SLOT ) {
@@ -780,16 +780,6 @@ static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr)
pci_config_writel(d, ofs, addr);
BX_INFO("region %d: 0x%08x\n", region_num, addr);
-
- /* enable memory mappings */
- cmd = pci_config_readw(d, PCI_COMMAND);
- if ( region_num == PCI_ROM_SLOT )
- cmd |= 2;
- else if (old_addr & PCI_ADDRESS_SPACE_IO)
- cmd |= 1;
- else
- cmd |= 2;
- pci_config_writew(d, PCI_COMMAND, cmd);
}
/* return the global irq number corresponding to a given device irq
@@ -946,6 +936,7 @@ static void pci_bios_init_device(PCIDevice *d)
{
int class;
uint32_t *paddr;
+ uint16_t cmd;
int i, pin, pic_irq, vendor_id, device_id;
class = pci_config_readw(d, PCI_CLASS_DEVICE);
@@ -1024,6 +1015,11 @@ static void pci_bios_init_device(PCIDevice *d)
break;
}
+ /* enable memory mappings */
+ cmd = pci_config_readw(d, PCI_COMMAND);
+ cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+ pci_config_writew(d, PCI_COMMAND, cmd);
+
/* map the interrupt */
pin = pci_config_readb(d, PCI_INTERRUPT_PIN);
if (pin != 0) {
VGA adapters need to claim memory and i/o transactions even if they do not have any i/o or memory bars. E.g. PCI spec, page 297, gives an example of such a device: Programming interface 0000 0000b VGA-compatible controller. Memory addresses 0A 0000h through 0B FFFFh. I/O addresses 3B0h to 3BBh and 3C0h to 3DFh and all aliases of these addresses. While we could check for these devices and special-case them, it is easier to fix this by enabling i/o and memory space unconditionally: devices that do not support it will just ignore this setting. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- kvm/bios/rombios32.c | 18 +++++++----------- 1 files changed, 7 insertions(+), 11 deletions(-)