diff mbox series

[3/7] s390x/pci: rework PCI LOAD

Message ID 1510075479-17224-4-git-send-email-pmorel@linux.vnet.ibm.com
State New
Headers show
Series s390x/pci: Improve zPCI to cover more cases | expand

Commit Message

Pierre Morel Nov. 7, 2017, 5:24 p.m. UTC
Enhance the fault detection, correction of the fault reporting.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
---
 hw/s390x/s390-pci-inst.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

Comments

Cornelia Huck Nov. 9, 2017, 4:51 p.m. UTC | #1
On Tue,  7 Nov 2017 18:24:35 +0100
Pierre Morel <pmorel@linux.vnet.ibm.com> wrote:

> Enhance the fault detection, correction of the fault reporting.

Basically the same comments as for the previous patch (but looks good
in general).

> 
> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
> ---
>  hw/s390x/s390-pci-inst.c | 27 ++++++++++++++++-----------
>  1 file changed, 16 insertions(+), 11 deletions(-)
Pierre Morel Nov. 13, 2017, 9:07 a.m. UTC | #2
On 09/11/2017 17:51, Cornelia Huck wrote:
> On Tue,  7 Nov 2017 18:24:35 +0100
> Pierre Morel <pmorel@linux.vnet.ibm.com> wrote:
> 
>> Enhance the fault detection, correction of the fault reporting.
> 
> Basically the same comments as for the previous patch (but looks good
> in general).

thanks I will process it the same way as patch 2 then.

> 
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
>> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
>> ---
>>   hw/s390x/s390-pci-inst.c | 27 ++++++++++++++++-----------
>>   1 file changed, 16 insertions(+), 11 deletions(-)
>
Pierre Morel Nov. 13, 2017, 9:44 a.m. UTC | #3
On 09/11/2017 17:51, Cornelia Huck wrote:
> On Tue,  7 Nov 2017 18:24:35 +0100
> Pierre Morel <pmorel@linux.vnet.ibm.com> wrote:
> 
>> Enhance the fault detection, correction of the fault reporting.
> 
> Basically the same comments as for the previous patch (but looks good
> in general).

thanks I will process it the same way as patch 2/7 then.


> 
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
>> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
>> ---
>>   hw/s390x/s390-pci-inst.c | 27 ++++++++++++++++-----------
>>   1 file changed, 16 insertions(+), 11 deletions(-)
>
diff mbox series

Patch

diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 4a2f996..62ebaa0 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -372,6 +372,11 @@  int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
     len = env->regs[r2] & 0xf;
     offset = env->regs[r2 + 1];
 
+    if (!(fh & FH_MASK_ENABLE)) {
+        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
+        return 0;
+    }
+
     pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
     if (!pbdev) {
         DPRINTF("pcilg no pci dev\n");
@@ -380,12 +385,7 @@  int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
     }
 
     switch (pbdev->state) {
-    case ZPCI_FS_RESERVED:
-    case ZPCI_FS_STANDBY:
-    case ZPCI_FS_DISABLED:
     case ZPCI_FS_PERMANENT_ERROR:
-        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
-        return 0;
     case ZPCI_FS_ERROR:
         setcc(cpu, ZPCI_PCI_LS_ERR);
         s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);
@@ -394,8 +394,9 @@  int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
         break;
     }
 
-    if (pcias < 6) {
-        if ((8 - (offset & 0x7)) < len) {
+    switch (pcias) {
+    case 0 ... 5:
+        if (!len || (len > (8 - (offset & 0x7)))) {
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
@@ -406,8 +407,9 @@  int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
-    } else if (pcias == 15) {
-        if ((4 - (offset & 0x3)) < len) {
+        break;
+    case 15:
+        if (!len || (len > (4 - (offset & 0x3))) || len == 3) {
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
@@ -418,8 +420,11 @@  int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
-    } else {
-        DPRINTF("invalid space\n");
+        break;
+    case PCI_ROM_SLOT:
+        /* Fall through */
+    default:
+        DPRINTF("pcilg invalid space\n");
         setcc(cpu, ZPCI_PCI_LS_ERR);
         s390_set_status_code(env, r2, ZPCI_PCI_ST_INVAL_AS);
         return 0;