@@ -23,9 +23,9 @@ A detailed command line would be:
-m 2G
-object memory-backend-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 -numa node,nodeid=0,cpus=0,memdev=ram-node0
-object memory-backend-ram,size=1024M,policy=bind,host-nodes=1,id=ram-node1 -numa node,nodeid=1,cpus=1,memdev=ram-node1
--device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4 -netdev user,id=nd-device e1000,bus=bridge1,addr=0x4,netdev=nd
--device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8,bus=pci.0 -device e1000,bus=bridge2,addr=0x3
--device pxb,id=bridge3,bus=pci.0,bus_nr=40,bus=pci.0 -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
+-device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4,chassis_nr=1 -netdev user,id=nd-device e1000,bus=bridge1,addr=0x4,netdev=nd
+-device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8,bus=pci.0,chassis_nr=2 -device e1000,bus=bridge2,addr=0x3
+-device pxb,id=bridge3,bus=pci.0,bus_nr=40,bus=pci.0,chassis_nr=3 -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
Here you have:
- 2 NUMA nodes for the guest, 0 and 1. (both mapped to the same NUMA node in host, but you can and should put it in different host NUMA nodes)
@@ -55,4 +55,3 @@ The PXB is composed by:
- Using the bridge will enable hotplug support
- All the devices behind the bridge will use bridge's IO/MEM windows compacting
the PCI address space.
-
@@ -39,6 +39,7 @@ typedef struct PXBDev {
PCIDevice parent_obj;
/*< public >*/
+ uint8_t chassis_nr;
uint8_t bus_nr;
uint16_t numa_node;
} PXBDev;
@@ -220,7 +221,12 @@ static int pxb_dev_initfn(PCIDevice *dev)
bds = qdev_create(BUS(bus), "pci-bridge");
bds->id = dev_name;
- qdev_prop_set_uint8(bds, PCI_BRIDGE_DEV_PROP_CHASSIS_NR, pxb->bus_nr);
+
+ if (!pxb->chassis_nr) {
+ pxb->chassis_nr = pxb->bus_nr;
+ }
+
+ qdev_prop_set_uint8(bds, PCI_BRIDGE_DEV_PROP_CHASSIS_NR, pxb->chassis_nr);
qdev_prop_set_bit(bds, PCI_BRIDGE_DEV_PROP_SHPC, false);
PCI_HOST_BRIDGE(ds)->bus = bus;
@@ -248,6 +254,8 @@ static void pxb_dev_exitfn(PCIDevice *pci_dev)
}
static Property pxb_dev_properties[] = {
+ /* Note: 0 is not a legal chassis number. */
+ DEFINE_PROP_UINT8("chassis_nr", PXBDev, chassis_nr, 0),
/* Note: 0 is not a legal a PXB bus number. */
DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
Add a chassis_nr property instead of using PXB bus number as internal bridge's chassis nr. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> --- v2->v3: - use bus nr if chassis nr is 0 (Micahel S. Tsirkin) v1->v2: - Rebased on master docs/pci_expander_bridge.txt | 7 +++---- hw/pci-bridge/pci_expander_bridge.c | 10 +++++++++- 2 files changed, 12 insertions(+), 5 deletions(-)