Message ID | 1432049762-2184-2-git-send-email-kwolf@redhat.com |
---|---|
State | New |
Headers | show |
On 05/19/2015 11:35 AM, Kevin Wolf wrote: > What all callers of fdctrl_reset_fifo() really want to do is to start > the command phase, where writes to the data port initiate a new command. > > The function doesn't only clear the FIFO, but also sets up the state so > that a new command can be received. Rename it to reflect this. > > Signed-off-by: Kevin Wolf <kwolf@redhat.com> > --- > hw/block/fdc.c | 30 +++++++++++++++--------------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/hw/block/fdc.c b/hw/block/fdc.c > index d8a8edd..9f95ace 100644 > --- a/hw/block/fdc.c > +++ b/hw/block/fdc.c > @@ -324,7 +324,7 @@ static void fd_revalidate(FDrive *drv) > /* Intel 82078 floppy disk controller emulation */ > > static void fdctrl_reset(FDCtrl *fdctrl, int do_irq); > -static void fdctrl_reset_fifo(FDCtrl *fdctrl); > +static void fdctrl_to_command_phase(FDCtrl *fdctrl); > static int fdctrl_transfer_handler (void *opaque, int nchan, > int dma_pos, int dma_len); > static void fdctrl_raise_irq(FDCtrl *fdctrl); > @@ -918,7 +918,7 @@ static void fdctrl_reset(FDCtrl *fdctrl, int do_irq) > fdctrl->data_dir = FD_DIR_WRITE; > for (i = 0; i < MAX_FD; i++) > fd_recalibrate(&fdctrl->drives[i]); > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > if (do_irq) { > fdctrl->status0 |= FD_SR0_RDYCHG; > fdctrl_raise_irq(fdctrl); > @@ -1134,8 +1134,8 @@ static uint32_t fdctrl_read_dir(FDCtrl *fdctrl) > return retval; > } > > -/* FIFO state control */ > -static void fdctrl_reset_fifo(FDCtrl *fdctrl) > +/* Clear the FIFO and update the state for receiving the next command */ > +static void fdctrl_to_command_phase(FDCtrl *fdctrl) > { > fdctrl->data_dir = FD_DIR_WRITE; > fdctrl->data_pos = 0; > @@ -1533,7 +1533,7 @@ static uint32_t fdctrl_read_data(FDCtrl *fdctrl) > if (fdctrl->msr & FD_MSR_NONDMA) { > fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00); > } else { > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > fdctrl_reset_irq(fdctrl); > } > } > @@ -1667,7 +1667,7 @@ static void fdctrl_handle_restore(FDCtrl *fdctrl, int direction) > fdctrl->config = fdctrl->fifo[11]; > fdctrl->precomp_trk = fdctrl->fifo[12]; > fdctrl->pwrd = fdctrl->fifo[13]; > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > } > > static void fdctrl_handle_save(FDCtrl *fdctrl, int direction) > @@ -1746,7 +1746,7 @@ static void fdctrl_handle_specify(FDCtrl *fdctrl, int direction) > else > fdctrl->dor |= FD_DOR_DMAEN; > /* No result back */ > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > } > > static void fdctrl_handle_sense_drive_status(FDCtrl *fdctrl, int direction) > @@ -1772,7 +1772,7 @@ static void fdctrl_handle_recalibrate(FDCtrl *fdctrl, int direction) > SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); > cur_drv = get_cur_drv(fdctrl); > fd_recalibrate(cur_drv); > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > /* Raise Interrupt */ > fdctrl->status0 |= FD_SR0_SEEK; > fdctrl_raise_irq(fdctrl); > @@ -1808,7 +1808,7 @@ static void fdctrl_handle_seek(FDCtrl *fdctrl, int direction) > > SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); > cur_drv = get_cur_drv(fdctrl); > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > /* The seek command just sends step pulses to the drive and doesn't care if > * there is a medium inserted of if it's banging the head against the drive. > */ > @@ -1825,7 +1825,7 @@ static void fdctrl_handle_perpendicular_mode(FDCtrl *fdctrl, int direction) > if (fdctrl->fifo[1] & 0x80) > cur_drv->perpendicular = fdctrl->fifo[1] & 0x7; > /* No result back */ > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > } > > static void fdctrl_handle_configure(FDCtrl *fdctrl, int direction) > @@ -1833,7 +1833,7 @@ static void fdctrl_handle_configure(FDCtrl *fdctrl, int direction) > fdctrl->config = fdctrl->fifo[2]; > fdctrl->precomp_trk = fdctrl->fifo[3]; > /* No result back */ > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > } > > static void fdctrl_handle_powerdown_mode(FDCtrl *fdctrl, int direction) > @@ -1846,7 +1846,7 @@ static void fdctrl_handle_powerdown_mode(FDCtrl *fdctrl, int direction) > static void fdctrl_handle_option(FDCtrl *fdctrl, int direction) > { > /* No result back */ > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > } > > static void fdctrl_handle_drive_specification_command(FDCtrl *fdctrl, int direction) > @@ -1864,7 +1864,7 @@ static void fdctrl_handle_drive_specification_command(FDCtrl *fdctrl, int direct > fdctrl->fifo[3] = 0; > fdctrl_set_fifo(fdctrl, 4); > } else { > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > } > } else if (fdctrl->data_len > 7) { > /* ERROR */ > @@ -1887,7 +1887,7 @@ static void fdctrl_handle_relative_seek_in(FDCtrl *fdctrl, int direction) > fd_seek(cur_drv, cur_drv->head, > cur_drv->track + fdctrl->fifo[2], cur_drv->sect, 1); > } > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > /* Raise Interrupt */ > fdctrl->status0 |= FD_SR0_SEEK; > fdctrl_raise_irq(fdctrl); > @@ -1905,7 +1905,7 @@ static void fdctrl_handle_relative_seek_out(FDCtrl *fdctrl, int direction) > fd_seek(cur_drv, cur_drv->head, > cur_drv->track - fdctrl->fifo[2], cur_drv->sect, 1); > } > - fdctrl_reset_fifo(fdctrl); > + fdctrl_to_command_phase(fdctrl); > /* Raise Interrupt */ > fdctrl->status0 |= FD_SR0_SEEK; > fdctrl_raise_irq(fdctrl); > why 'to' instead of 'start' or 'init'? It seems weird to describe it in a third-party descriptive way instead of with the imperative. Bike-shedding aside: Reviewed-by: John Snow <jsnow@redhat.com>
diff --git a/hw/block/fdc.c b/hw/block/fdc.c index d8a8edd..9f95ace 100644 --- a/hw/block/fdc.c +++ b/hw/block/fdc.c @@ -324,7 +324,7 @@ static void fd_revalidate(FDrive *drv) /* Intel 82078 floppy disk controller emulation */ static void fdctrl_reset(FDCtrl *fdctrl, int do_irq); -static void fdctrl_reset_fifo(FDCtrl *fdctrl); +static void fdctrl_to_command_phase(FDCtrl *fdctrl); static int fdctrl_transfer_handler (void *opaque, int nchan, int dma_pos, int dma_len); static void fdctrl_raise_irq(FDCtrl *fdctrl); @@ -918,7 +918,7 @@ static void fdctrl_reset(FDCtrl *fdctrl, int do_irq) fdctrl->data_dir = FD_DIR_WRITE; for (i = 0; i < MAX_FD; i++) fd_recalibrate(&fdctrl->drives[i]); - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); if (do_irq) { fdctrl->status0 |= FD_SR0_RDYCHG; fdctrl_raise_irq(fdctrl); @@ -1134,8 +1134,8 @@ static uint32_t fdctrl_read_dir(FDCtrl *fdctrl) return retval; } -/* FIFO state control */ -static void fdctrl_reset_fifo(FDCtrl *fdctrl) +/* Clear the FIFO and update the state for receiving the next command */ +static void fdctrl_to_command_phase(FDCtrl *fdctrl) { fdctrl->data_dir = FD_DIR_WRITE; fdctrl->data_pos = 0; @@ -1533,7 +1533,7 @@ static uint32_t fdctrl_read_data(FDCtrl *fdctrl) if (fdctrl->msr & FD_MSR_NONDMA) { fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00); } else { - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); fdctrl_reset_irq(fdctrl); } } @@ -1667,7 +1667,7 @@ static void fdctrl_handle_restore(FDCtrl *fdctrl, int direction) fdctrl->config = fdctrl->fifo[11]; fdctrl->precomp_trk = fdctrl->fifo[12]; fdctrl->pwrd = fdctrl->fifo[13]; - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); } static void fdctrl_handle_save(FDCtrl *fdctrl, int direction) @@ -1746,7 +1746,7 @@ static void fdctrl_handle_specify(FDCtrl *fdctrl, int direction) else fdctrl->dor |= FD_DOR_DMAEN; /* No result back */ - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); } static void fdctrl_handle_sense_drive_status(FDCtrl *fdctrl, int direction) @@ -1772,7 +1772,7 @@ static void fdctrl_handle_recalibrate(FDCtrl *fdctrl, int direction) SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); cur_drv = get_cur_drv(fdctrl); fd_recalibrate(cur_drv); - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); /* Raise Interrupt */ fdctrl->status0 |= FD_SR0_SEEK; fdctrl_raise_irq(fdctrl); @@ -1808,7 +1808,7 @@ static void fdctrl_handle_seek(FDCtrl *fdctrl, int direction) SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK); cur_drv = get_cur_drv(fdctrl); - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); /* The seek command just sends step pulses to the drive and doesn't care if * there is a medium inserted of if it's banging the head against the drive. */ @@ -1825,7 +1825,7 @@ static void fdctrl_handle_perpendicular_mode(FDCtrl *fdctrl, int direction) if (fdctrl->fifo[1] & 0x80) cur_drv->perpendicular = fdctrl->fifo[1] & 0x7; /* No result back */ - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); } static void fdctrl_handle_configure(FDCtrl *fdctrl, int direction) @@ -1833,7 +1833,7 @@ static void fdctrl_handle_configure(FDCtrl *fdctrl, int direction) fdctrl->config = fdctrl->fifo[2]; fdctrl->precomp_trk = fdctrl->fifo[3]; /* No result back */ - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); } static void fdctrl_handle_powerdown_mode(FDCtrl *fdctrl, int direction) @@ -1846,7 +1846,7 @@ static void fdctrl_handle_powerdown_mode(FDCtrl *fdctrl, int direction) static void fdctrl_handle_option(FDCtrl *fdctrl, int direction) { /* No result back */ - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); } static void fdctrl_handle_drive_specification_command(FDCtrl *fdctrl, int direction) @@ -1864,7 +1864,7 @@ static void fdctrl_handle_drive_specification_command(FDCtrl *fdctrl, int direct fdctrl->fifo[3] = 0; fdctrl_set_fifo(fdctrl, 4); } else { - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); } } else if (fdctrl->data_len > 7) { /* ERROR */ @@ -1887,7 +1887,7 @@ static void fdctrl_handle_relative_seek_in(FDCtrl *fdctrl, int direction) fd_seek(cur_drv, cur_drv->head, cur_drv->track + fdctrl->fifo[2], cur_drv->sect, 1); } - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); /* Raise Interrupt */ fdctrl->status0 |= FD_SR0_SEEK; fdctrl_raise_irq(fdctrl); @@ -1905,7 +1905,7 @@ static void fdctrl_handle_relative_seek_out(FDCtrl *fdctrl, int direction) fd_seek(cur_drv, cur_drv->head, cur_drv->track - fdctrl->fifo[2], cur_drv->sect, 1); } - fdctrl_reset_fifo(fdctrl); + fdctrl_to_command_phase(fdctrl); /* Raise Interrupt */ fdctrl->status0 |= FD_SR0_SEEK; fdctrl_raise_irq(fdctrl);
What all callers of fdctrl_reset_fifo() really want to do is to start the command phase, where writes to the data port initiate a new command. The function doesn't only clear the FIFO, but also sets up the state so that a new command can be received. Rename it to reflect this. Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- hw/block/fdc.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)