diff mbox

[v3,03/14] blockdev: Use blk_new_open() in blockdev_init()

Message ID 1422284444-12529-4-git-send-email-mreitz@redhat.com
State New
Headers show

Commit Message

Max Reitz Jan. 26, 2015, 3 p.m. UTC 
Due to different error propagation, this breaks tests 051 and 087; fix
their output.

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 blockdev.c                 | 92 +++++++++++++++++++++-------------------------
 tests/qemu-iotests/051.out | 60 +++++++++++++++---------------
 tests/qemu-iotests/087.out |  8 ++--
 3 files changed, 76 insertions(+), 84 deletions(-)

Comments

Eric Blake Jan. 26, 2015, 10:37 p.m. UTC | #1 
On 01/26/2015 08:00 AM, Max Reitz wrote:
> Due to different error propagation, this breaks tests 051 and 087; fix
> their output.
> 
> Signed-off-by: Max Reitz <mreitz@redhat.com>
> ---
>  blockdev.c                 | 92 +++++++++++++++++++++-------------------------
>  tests/qemu-iotests/051.out | 60 +++++++++++++++---------------
>  tests/qemu-iotests/087.out |  8 ++--
>  3 files changed, 76 insertions(+), 84 deletions(-)

>  
>  Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
> -QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: could not open disk image TEST_DIR/t.qcow2: Driver specified twice
> +QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'

Is it possible to specify driver=qcow2,format=qcow2?  Should it be?
Either way, are we testing the outcome of that?  (that is, there is a
difference between two competing options, and two spellings of the same
option - I could go for either rejecting the duplication, or for
allowing it when the two are the same, whichever is easier, but would
like to make sure it is tested so we know if we change our minds later
whether we are risking a regression).

>  
>  
>  === Specifying both an option and its legacy alias ===
> @@ -323,13 +323,13 @@ QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' a
>  === Parsing protocol from file name ===
>  
>  Testing: -hda foo:bar
> -QEMU_PROG: -hda foo:bar: could not open disk image foo:bar: Unknown protocol
> +QEMU_PROG: -hda foo:bar: Unknown protocol

Not the fault of this patch, but can this error message be improved?
Even 'Unknown protocol: foo' would read better.

All of the other shorter error messages still seem to read fine, and the
decrease in verbosity could be argued as a feature.  So overall, I'm
fine with this patch.

Reviewed-by: Eric Blake <eblake@redhat.com>
Max Reitz Jan. 27, 2015, 2:08 a.m. UTC | #2 
On 2015-01-26 at 17:37, Eric Blake wrote:
> On 01/26/2015 08:00 AM, Max Reitz wrote:
>> Due to different error propagation, this breaks tests 051 and 087; fix
>> their output.
>>
>> Signed-off-by: Max Reitz <mreitz@redhat.com>
>> ---
>>   blockdev.c                 | 92 +++++++++++++++++++++-------------------------
>>   tests/qemu-iotests/051.out | 60 +++++++++++++++---------------
>>   tests/qemu-iotests/087.out |  8 ++--
>>   3 files changed, 76 insertions(+), 84 deletions(-)
>>   
>>   Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
>> -QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: could not open disk image TEST_DIR/t.qcow2: Driver specified twice
>> +QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'
> Is it possible to specify driver=qcow2,format=qcow2?  Should it be?

No, it isn't, and in my opinion it shouldn't be (just a personal 
feeling, though).

> Either way, are we testing the outcome of that?  (that is, there is a
> difference between two competing options, and two spellings of the same
> option - I could go for either rejecting the duplication, or for
> allowing it when the two are the same, whichever is easier, but would
> like to make sure it is tested so we know if we change our minds later
> whether we are risking a regression).

No, we aren't yet. Albeit not really related to this series, it is a 
good point, so I'll probably just add a test case in v4.

>>   
>>   
>>   === Specifying both an option and its legacy alias ===
>> @@ -323,13 +323,13 @@ QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' a
>>   === Parsing protocol from file name ===
>>   
>>   Testing: -hda foo:bar
>> -QEMU_PROG: -hda foo:bar: could not open disk image foo:bar: Unknown protocol
>> +QEMU_PROG: -hda foo:bar: Unknown protocol
> Not the fault of this patch, but can this error message be improved?
> Even 'Unknown protocol: foo' would read better.

Indeed, I'll fix it.

> All of the other shorter error messages still seem to read fine, and the
> decrease in verbosity could be argued as a feature.  So overall, I'm
> fine with this patch.
>
> Reviewed-by: Eric Blake <eblake@redhat.com>
>

Thank you!

Max
diff mbox

Patch

diff --git a/blockdev.c b/blockdev.c
index d59efd3..7573746 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -354,13 +354,11 @@  static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
     ThrottleConfig cfg;
     int snapshot = 0;
     bool copy_on_read;
-    int ret;
     Error *error = NULL;
     QemuOpts *opts;
     const char *id;
     bool has_driver_specific_opts;
     BlockdevDetectZeroesOptions detect_zeroes;
-    BlockDriver *drv = NULL;
 
     /* Check common options by copying from bs_opts to opts, all other options
      * stay in bs_opts for processing by bdrv_open(). */
@@ -426,11 +424,11 @@  static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
             goto early_err;
         }
 
-        drv = bdrv_find_format(buf);
-        if (!drv) {
-            error_setg(errp, "'%s' invalid format", buf);
+        if (qdict_haskey(bs_opts, "driver")) {
+            error_setg(errp, "Cannot specify both 'driver' and 'format'");
             goto early_err;
         }
+        qdict_put_obj(bs_opts, "driver", QOBJECT(qstring_from_str(buf)));
     }
 
     /* disk I/O throttling */
@@ -505,70 +503,64 @@  static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
     }
 
     /* init */
-    blk = blk_new_with_bs(qemu_opts_id(opts), errp);
-    if (!blk) {
-        goto early_err;
-    }
-    bs = blk_bs(blk);
-    bs->open_flags = snapshot ? BDRV_O_SNAPSHOT : 0;
-    bs->read_only = ro;
-    bs->detect_zeroes = detect_zeroes;
-
-    bdrv_set_on_error(bs, on_read_error, on_write_error);
+    if ((!file || !*file) && !has_driver_specific_opts) {
+        blk = blk_new_with_bs(qemu_opts_id(opts), errp);
+        if (!blk) {
+            goto early_err;
+        }
 
-    /* disk I/O throttling */
-    if (throttle_enabled(&cfg)) {
-        bdrv_io_limits_enable(bs);
-        bdrv_set_io_limits(bs, &cfg);
-    }
+        bs = blk_bs(blk);
+        bs->open_flags = snapshot ? BDRV_O_SNAPSHOT : 0;
+        bs->read_only = ro;
 
-    if (!file || !*file) {
-        if (has_driver_specific_opts) {
+        QDECREF(bs_opts);
+    } else {
+        if (file && !*file) {
             file = NULL;
-        } else {
-            QDECREF(bs_opts);
-            qemu_opts_del(opts);
-            return blk;
         }
-    }
-    if (snapshot) {
-        /* always use cache=unsafe with snapshot */
-        bdrv_flags &= ~BDRV_O_CACHE_MASK;
-        bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB|BDRV_O_NO_FLUSH);
-    }
 
-    if (copy_on_read) {
-        bdrv_flags |= BDRV_O_COPY_ON_READ;
-    }
+        if (snapshot) {
+            /* always use cache=unsafe with snapshot */
+            bdrv_flags &= ~BDRV_O_CACHE_MASK;
+            bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB|BDRV_O_NO_FLUSH);
+        }
+
+        if (copy_on_read) {
+            bdrv_flags |= BDRV_O_COPY_ON_READ;
+        }
+
+        if (runstate_check(RUN_STATE_INMIGRATE)) {
+            bdrv_flags |= BDRV_O_INCOMING;
+        }
 
-    if (runstate_check(RUN_STATE_INMIGRATE)) {
-        bdrv_flags |= BDRV_O_INCOMING;
+        bdrv_flags |= ro ? 0 : BDRV_O_RDWR;
+
+        blk = blk_new_open(qemu_opts_id(opts), file, NULL, bs_opts, bdrv_flags,
+                           errp);
+        if (!blk) {
+            goto err_no_bs_opts;
+        }
+        bs = blk_bs(blk);
     }
 
-    bdrv_flags |= ro ? 0 : BDRV_O_RDWR;
+    bs->detect_zeroes = detect_zeroes;
 
-    QINCREF(bs_opts);
-    ret = bdrv_open(&bs, file, NULL, bs_opts, bdrv_flags, drv, &error);
-    assert(bs == blk_bs(blk));
+    bdrv_set_on_error(bs, on_read_error, on_write_error);
 
-    if (ret < 0) {
-        error_setg(errp, "could not open disk image %s: %s",
-                   file ?: blk_name(blk), error_get_pretty(error));
-        error_free(error);
-        goto err;
+    /* disk I/O throttling */
+    if (throttle_enabled(&cfg)) {
+        bdrv_io_limits_enable(bs);
+        bdrv_set_io_limits(bs, &cfg);
     }
 
     if (bdrv_key_required(bs)) {
         autostart = 0;
     }
 
-    QDECREF(bs_opts);
+err_no_bs_opts:
     qemu_opts_del(opts);
-
     return blk;
 
-err:
-    blk_unref(blk);
 early_err:
     qemu_opts_del(opts);
 err_no_opts:
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index f497c57..ecf0a31 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -5,43 +5,43 @@  Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file='TEST_DIR
 === Unknown option ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt'
 
 
 === Unknown protocol option ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the option 'unknown_opt'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt'
 
 
 === Invalid format ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: 'foo' invalid format
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo'
 
 Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: could not open disk image TEST_DIR/t.qcow2: Unknown driver 'foo'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo'
 
 Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: could not open disk image TEST_DIR/t.qcow2: Driver specified twice
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'
 
 
 === Overriding backing file ===
@@ -55,13 +55,13 @@  ide0-hd0: TEST_DIR/t.qcow2 (qcow2)
 (qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing files
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing files
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing files
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
 
 
 === Enable and disable lazy refcounting on the command line, plus some invalid values ===
@@ -75,20 +75,20 @@  QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: could not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' or 'off'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: could not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' or 'off'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off'
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: could not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' or 'off'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off'
 
 
 === With version 2 images enabling lazy refcounts must fail ===
 
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: could not open disk image TEST_DIR/t.qcow2: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
 QEMU X.Y.Z monitor - type 'help' for more information
@@ -248,31 +248,31 @@  QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: could not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device '' doesn't support the option 'filename'
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: Block format 'qcow2' used by device '' doesn't support the option 'filename'
 
 
 === Leaving out required options ===
 
 Testing: -drive driver=file
-QEMU_PROG: -drive driver=file: could not open disk image ide0-hd0: The 'file' block driver requires a file name
+QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name
 
 Testing: -drive driver=nbd
-QEMU_PROG: -drive driver=nbd: could not open disk image ide0-hd0: one of path and host must be specified.
+QEMU_PROG: -drive driver=nbd: one of path and host must be specified.
 
 Testing: -drive driver=raw
-QEMU_PROG: -drive driver=raw: could not open disk image ide0-hd0: Can't use 'raw' as a block driver for the protocol level
+QEMU_PROG: -drive driver=raw: Can't use 'raw' as a block driver for the protocol level
 
 Testing: -drive file.driver=file
-QEMU_PROG: -drive file.driver=file: could not open disk image ide0-hd0: The 'file' block driver requires a file name
+QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name
 
 Testing: -drive file.driver=nbd
-QEMU_PROG: -drive file.driver=nbd: could not open disk image ide0-hd0: one of path and host must be specified.
+QEMU_PROG: -drive file.driver=nbd: one of path and host must be specified.
 
 Testing: -drive file.driver=raw
-QEMU_PROG: -drive file.driver=raw: could not open disk image ide0-hd0: Can't use 'raw' as a block driver for the protocol level
+QEMU_PROG: -drive file.driver=raw: Can't use 'raw' as a block driver for the protocol level
 
 Testing: -drive foo=bar
-QEMU_PROG: -drive foo=bar: could not open disk image ide0-hd0: Must specify either driver or file
+QEMU_PROG: -drive foo=bar: Must specify either driver or file
 
 
 === Specifying both an option and its legacy alias ===
@@ -323,13 +323,13 @@  QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' a
 === Parsing protocol from file name ===
 
 Testing: -hda foo:bar
-QEMU_PROG: -hda foo:bar: could not open disk image foo:bar: Unknown protocol
+QEMU_PROG: -hda foo:bar: Unknown protocol
 
 Testing: -drive file=foo:bar
-QEMU_PROG: -drive file=foo:bar: could not open disk image foo:bar: Unknown protocol
+QEMU_PROG: -drive file=foo:bar: Unknown protocol
 
 Testing: -drive file.filename=foo:bar
-QEMU_PROG: -drive file.filename=foo:bar: could not open disk image ide0-hd0: Could not open 'foo:bar': No such file or directory
+QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
 
 Testing: -hda file:TEST_DIR/t.qcow2
 QEMU X.Y.Z monitor - type 'help' for more information
@@ -340,7 +340,7 @@  QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) qququiquit
 
 Testing: -drive file.filename=file:TEST_DIR/t.qcow2
-QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: could not open disk image ide0-hd0: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
 
 
 === Snapshot mode ===
diff --git a/tests/qemu-iotests/087.out b/tests/qemu-iotests/087.out
index 91f4ea1..0ba2e43 100644
--- a/tests/qemu-iotests/087.out
+++ b/tests/qemu-iotests/087.out
@@ -21,9 +21,9 @@  QMP_VERSION
 {"return": {}}
 {"error": {"class": "GenericError", "desc": "Device with id 'disk' already exists"}}
 {"error": {"class": "GenericError", "desc": "Device name 'test-node' conflicts with an existing node name"}}
-{"error": {"class": "GenericError", "desc": "could not open disk image disk2: node-name=disk is conflicting with a device id"}}
-{"error": {"class": "GenericError", "desc": "could not open disk image disk2: Duplicate node name"}}
-{"error": {"class": "GenericError", "desc": "could not open disk image disk3: node-name=disk3 is conflicting with a device id"}}
+{"error": {"class": "GenericError", "desc": "node-name=disk is conflicting with a device id"}}
+{"error": {"class": "GenericError", "desc": "Duplicate node name"}}
+{"error": {"class": "GenericError", "desc": "node-name=disk3 is conflicting with a device id"}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "SHUTDOWN"}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "DEVICE_TRAY_MOVED", "data": {"device": "ide1-cd0", "tray-open": true}}
@@ -57,7 +57,7 @@  QMP_VERSION
 Testing:
 QMP_VERSION
 {"return": {}}
-{"error": {"class": "GenericError", "desc": "could not open disk image disk: Guest must be stopped for opening of encrypted image"}}
+{"error": {"class": "GenericError", "desc": "Guest must be stopped for opening of encrypted image"}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "SHUTDOWN"}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "DEVICE_TRAY_MOVED", "data": {"device": "ide1-cd0", "tray-open": true}}