diff mbox

[02/12] Spelling fixes in comments and documentation

Message ID 1347612146-5407-3-git-send-email-stefanha@gmail.com
State New
Headers show

Commit Message

Stefan Hajnoczi Sept. 14, 2012, 8:42 a.m. UTC
From: Stefan Weil <sw@weilnetz.de>

These wrong spellings were detected by codespell:

* successully -> successfully

* alot -> a lot

* wanna -> want to

* infomation -> information

* occured -> occurred

["also is" -> "is also" and "ressources" -> "resources" suggested by
Peter Maydell <peter.maydell@linaro.org>]

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 docs/specs/ppc-spapr-hcalls.txt |    2 +-
 docs/usb2.txt                   |    4 ++--
 hw/xen_pt.h                     |    4 ++--
 hw/xen_pt_config_init.c         |   14 +++++++-------
 qemu-img.c                      |    2 +-
 qemu-img.texi                   |    2 +-
 6 files changed, 14 insertions(+), 14 deletions(-)
diff mbox

Patch

diff --git a/docs/specs/ppc-spapr-hcalls.txt b/docs/specs/ppc-spapr-hcalls.txt
index 52ba8d4..667b3fa 100644
--- a/docs/specs/ppc-spapr-hcalls.txt
+++ b/docs/specs/ppc-spapr-hcalls.txt
@@ -31,7 +31,7 @@  Arguments:
 
 Returns:
 
-  H_SUCCESS   : Successully called the RTAS function (RTAS result
+  H_SUCCESS   : Successfully called the RTAS function (RTAS result
                 will have been stored in the parameter block)
   H_PARAMETER : Unknown token
 
diff --git a/docs/usb2.txt b/docs/usb2.txt
index d17e3c0..43dacde 100644
--- a/docs/usb2.txt
+++ b/docs/usb2.txt
@@ -58,11 +58,11 @@  try ...
 xhci controller support
 -----------------------
 
-There also is xhci host controller support available.  It got alot
+There is also xhci host controller support available.  It got a lot
 less testing than ehci and there are a bunch of known limitations, so
 ehci may work better for you.  On the other hand the xhci hardware
 design is much more virtualization-friendly, thus xhci emulation uses
-less ressources (especially cpu).  If you wanna give xhci a try
+less resources (especially cpu).  If you want to give xhci a try
 use this to add the host controller ...
 
     qemu -device nec-usb-xhci,id=xhci
diff --git a/hw/xen_pt.h b/hw/xen_pt.h
index 41904ec..112477a 100644
--- a/hw/xen_pt.h
+++ b/hw/xen_pt.h
@@ -96,7 +96,7 @@  typedef struct XenPTRegion {
  * - do NOT use ALL F for init_val, otherwise the tbl will not be registered.
  */
 
-/* emulated register infomation */
+/* emulated register information */
 struct XenPTRegInfo {
     uint32_t offset;
     uint32_t size;
@@ -140,7 +140,7 @@  typedef int (*xen_pt_reg_size_init_fn)
     (XenPCIPassthroughState *, const XenPTRegGroupInfo *,
      uint32_t base_offset, uint8_t *size);
 
-/* emulated register group infomation */
+/* emulated register group information */
 struct XenPTRegGroupInfo {
     uint8_t grp_id;
     XenPTRegisterGroupType grp_type;
diff --git a/hw/xen_pt_config_init.c b/hw/xen_pt_config_init.c
index 00eb3d9..e524a40 100644
--- a/hw/xen_pt_config_init.c
+++ b/hw/xen_pt_config_init.c
@@ -562,7 +562,7 @@  static int xen_pt_exp_rom_bar_reg_write(XenPCIPassthroughState *s,
     return 0;
 }
 
-/* Header Type0 reg static infomation table */
+/* Header Type0 reg static information table */
 static XenPTRegInfo xen_pt_emu_reg_header0[] = {
     /* Vendor ID reg */
     {
@@ -753,7 +753,7 @@  static XenPTRegInfo xen_pt_emu_reg_header0[] = {
  * Vital Product Data Capability
  */
 
-/* Vital Product Data Capability Structure reg static infomation table */
+/* Vital Product Data Capability Structure reg static information table */
 static XenPTRegInfo xen_pt_emu_reg_vpd[] = {
     {
         .offset     = PCI_CAP_LIST_NEXT,
@@ -775,7 +775,7 @@  static XenPTRegInfo xen_pt_emu_reg_vpd[] = {
  * Vendor Specific Capability
  */
 
-/* Vendor Specific Capability Structure reg static infomation table */
+/* Vendor Specific Capability Structure reg static information table */
 static XenPTRegInfo xen_pt_emu_reg_vendor[] = {
     {
         .offset     = PCI_CAP_LIST_NEXT,
@@ -866,7 +866,7 @@  static int xen_pt_linkctrl2_reg_init(XenPCIPassthroughState *s,
     return 0;
 }
 
-/* PCI Express Capability Structure reg static infomation table */
+/* PCI Express Capability Structure reg static information table */
 static XenPTRegInfo xen_pt_emu_reg_pcie[] = {
     /* Next Pointer reg */
     {
@@ -981,7 +981,7 @@  static int xen_pt_pmcsr_reg_write(XenPCIPassthroughState *s,
     return 0;
 }
 
-/* Power Management Capability reg static infomation table */
+/* Power Management Capability reg static information table */
 static XenPTRegInfo xen_pt_emu_reg_pm[] = {
     /* Next Pointer reg */
     {
@@ -1259,7 +1259,7 @@  static int xen_pt_msgdata_reg_write(XenPCIPassthroughState *s,
     return 0;
 }
 
-/* MSI Capability Structure reg static infomation table */
+/* MSI Capability Structure reg static information table */
 static XenPTRegInfo xen_pt_emu_reg_msi[] = {
     /* Next Pointer reg */
     {
@@ -1396,7 +1396,7 @@  static int xen_pt_msixctrl_reg_write(XenPCIPassthroughState *s,
     return 0;
 }
 
-/* MSI-X Capability Structure reg static infomation table */
+/* MSI-X Capability Structure reg static information table */
 static XenPTRegInfo xen_pt_emu_reg_msix[] = {
     /* Next Pointer reg */
     {
diff --git a/qemu-img.c b/qemu-img.c
index b41e670..833b2b0 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -89,7 +89,7 @@  static void help(void)
            "  '-r' tries to repair any inconsistencies that are found during the check.\n"
            "       '-r leaks' repairs only cluster leaks, whereas '-r all' fixes all\n"
            "       kinds of errors, with a higher risk of choosing the wrong fix or\n"
-           "       hiding corruption that has already occured.\n"
+           "       hiding corruption that has already occurred.\n"
            "\n"
            "Parameters to snapshot subcommand:\n"
            "  'snapshot' is the name of the snapshot to create, apply or delete\n"
diff --git a/qemu-img.texi b/qemu-img.texi
index 6b42e35..360543b 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -87,7 +87,7 @@  Perform a consistency check on the disk image @var{filename}.
 If @code{-r} is specified, qemu-img tries to repair any inconsistencies found
 during the check. @code{-r leaks} repairs only cluster leaks, whereas
 @code{-r all} fixes all kinds of errors, with a higher risk of choosing the
-wrong fix or hiding corruption that has already occured.
+wrong fix or hiding corruption that has already occurred.
 
 Only the formats @code{qcow2}, @code{qed} and @code{vdi} support
 consistency checks.