diff mbox

[1/4] block: use Error mechanism instead of -errno for block_job_create()

Message ID 1335195589-13285-2-git-send-email-stefanha@linux.vnet.ibm.com
State New
Headers show

Commit Message

Stefan Hajnoczi April 23, 2012, 3:39 p.m. UTC 
The block job API uses -errno return values internally and we convert
these to Error in the QMP functions.  This is ugly because the Error
should be created at the point where we still have all the relevant
information.  More importantly, it is hard to add new error cases to
this case since we quickly run out of -errno values without losing
information.

Go ahead an use Error directly and don't convert later.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 block.c        |    4 +++-
 block/stream.c |   11 +++++------
 block_int.h    |   11 +++++++----
 blockdev.c     |   14 +++-----------
 4 files changed, 18 insertions(+), 22 deletions(-)

Comments

Paolo Bonzini April 23, 2012, 3:42 p.m. UTC | #1 
Il 23/04/2012 17:39, Stefan Hajnoczi ha scritto:
> +    stream_start(bs, base_bs, base, block_stream_cb, bs, errp);
> +    if (error_is_set(errp)) {
> +        return;
>      }

This needs to be

    Error *local_err = NULL;
    stream_start(bs, base_bs, base, block_stream_cb, bs, &local_err);
    if (local_err) {
        error_propagate(errp, local_err);
        return;
    }

Otherwise looks good.

Paolo
Stefan Hajnoczi April 23, 2012, 3:45 p.m. UTC | #2 
On Mon, Apr 23, 2012 at 4:42 PM, Paolo Bonzini <pbonzini@redhat.com> wrote:
> Il 23/04/2012 17:39, Stefan Hajnoczi ha scritto:
>> +    stream_start(bs, base_bs, base, block_stream_cb, bs, errp);
>> +    if (error_is_set(errp)) {
>> +        return;
>>      }
>
> This needs to be
>
>    Error *local_err = NULL;
>    stream_start(bs, base_bs, base, block_stream_cb, bs, &local_err);
>    if (local_err) {
>        error_propagate(errp, local_err);
>        return;
>    }
>
> Otherwise looks good.

Right, thanks for spotting this.  Perhaps we should assert(errp) at
some point so we don't need to do this dance every time.  Ignoring
errors is usually a bad idea...

For now I'll do the local_err thing.

Stefan
diff mbox

Patch

diff --git a/block.c b/block.c
index c0c90f0..528b696 100644
--- a/block.c
+++ b/block.c
@@ -4072,11 +4072,13 @@  out:
 }
 
 void *block_job_create(const BlockJobType *job_type, BlockDriverState *bs,
-                       BlockDriverCompletionFunc *cb, void *opaque)
+                       BlockDriverCompletionFunc *cb, void *opaque,
+                       Error **errp)
 {
     BlockJob *job;
 
     if (bs->job || bdrv_in_use(bs)) {
+        error_set(errp, QERR_DEVICE_IN_USE, bdrv_get_device_name(bs));
         return NULL;
     }
     bdrv_set_in_use(bs, 1);
diff --git a/block/stream.c b/block/stream.c
index 0efe1ad..0aa7083 100644
--- a/block/stream.c
+++ b/block/stream.c
@@ -280,16 +280,16 @@  static BlockJobType stream_job_type = {
     .set_speed     = stream_set_speed,
 };
 
-int stream_start(BlockDriverState *bs, BlockDriverState *base,
-                 const char *base_id, BlockDriverCompletionFunc *cb,
-                 void *opaque)
+void stream_start(BlockDriverState *bs, BlockDriverState *base,
+                  const char *base_id, BlockDriverCompletionFunc *cb,
+                  void *opaque, Error **errp)
 {
     StreamBlockJob *s;
     Coroutine *co;
 
-    s = block_job_create(&stream_job_type, bs, cb, opaque);
+    s = block_job_create(&stream_job_type, bs, cb, opaque, errp);
     if (!s) {
-        return -EBUSY; /* bs must already be in use */
+        return; /* bs must already be in use */
     }
 
     s->base = base;
@@ -300,5 +300,4 @@  int stream_start(BlockDriverState *bs, BlockDriverState *base,
     co = qemu_coroutine_create(stream_run);
     trace_stream_start(bs, base, s, co, opaque);
     qemu_coroutine_enter(co, s);
-    return 0;
 }
diff --git a/block_int.h b/block_int.h
index 0e5a032..1557d5c 100644
--- a/block_int.h
+++ b/block_int.h
@@ -345,6 +345,7 @@  int is_windows_drive(const char *filename);
  * @bs: The block
  * @cb: Completion function for the job.
  * @opaque: Opaque pointer value passed to @cb.
+ * @errp: A location to return DeviceInUse.
  *
  * Create a new long-running block device job and return it.  The job
  * will call @cb asynchronously when the job completes.  Note that
@@ -356,7 +357,8 @@  int is_windows_drive(const char *filename);
  * called from a wrapper that is specific to the job type.
  */
 void *block_job_create(const BlockJobType *job_type, BlockDriverState *bs,
-                       BlockDriverCompletionFunc *cb, void *opaque);
+                       BlockDriverCompletionFunc *cb, void *opaque,
+                       Error **errp);
 
 /**
  * block_job_complete:
@@ -416,6 +418,7 @@  void block_job_cancel_sync(BlockJob *job);
  * backing file if the job completes.  Ignored if @base is %NULL.
  * @cb: Completion function for the job.
  * @opaque: Opaque pointer value passed to @cb.
+ * @errp: A location to return DeviceInUse.
  *
  * Start a streaming operation on @bs.  Clusters that are unallocated
  * in @bs, but allocated in any image between @base and @bs (both
@@ -423,8 +426,8 @@  void block_job_cancel_sync(BlockJob *job);
  * streaming job, the backing file of @bs will be changed to
  * @base_id in the written image and to @base in the live BlockDriverState.
  */
-int stream_start(BlockDriverState *bs, BlockDriverState *base,
-                 const char *base_id, BlockDriverCompletionFunc *cb,
-                 void *opaque);
+void stream_start(BlockDriverState *bs, BlockDriverState *base,
+                  const char *base_id, BlockDriverCompletionFunc *cb,
+                  void *opaque, Error **errp);
 
 #endif /* BLOCK_INT_H */
diff --git a/blockdev.c b/blockdev.c
index 0c2440e..202c3ae 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1095,7 +1095,6 @@  void qmp_block_stream(const char *device, bool has_base,
 {
     BlockDriverState *bs;
     BlockDriverState *base_bs = NULL;
-    int ret;
 
     bs = bdrv_find(device);
     if (!bs) {
@@ -1111,16 +1110,9 @@  void qmp_block_stream(const char *device, bool has_base,
         }
     }
 
-    ret = stream_start(bs, base_bs, base, block_stream_cb, bs);
-    if (ret < 0) {
-        switch (ret) {
-        case -EBUSY:
-            error_set(errp, QERR_DEVICE_IN_USE, device);
-            return;
-        default:
-            error_set(errp, QERR_NOT_SUPPORTED);
-            return;
-        }
+    stream_start(bs, base_bs, base, block_stream_cb, bs, errp);
+    if (error_is_set(errp)) {
+        return;
     }
 
     /* Grab a reference so hotplug does not delete the BlockDriverState from