diff mbox

[v3,1/2] hw/arm_sysctl.c: Add the Versatile Express system registers

Message ID 1299496232-14625-2-git-send-email-peter.maydell@linaro.org
State New
Headers show

Commit Message

Peter Maydell March 7, 2011, 11:10 a.m. UTC
Add support for the Versatile Express SYS_CFG registers, which provide
a generic means of reading or writing configuration information from
various parts of the board. We only implement shutdown and reset.

Also make the RESETCTL register RAZ/WI on Versatile Express rather
than reset the board. Other system registers are generally the same
as Versatile and Realview.

This includes a VMState version number bump for arm_sysctl,
since we have new register state to preserve. It also adds
sys_mci to the VMState while we're bumping the version number
(an accidental omission from commit b50ff6f5).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm_sysctl.c |   64 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 63 insertions(+), 1 deletions(-)

Comments

Juan Quintela March 7, 2011, 4:16 p.m. UTC | #1
Peter Maydell <peter.maydell@linaro.org> wrote:
> Add support for the Versatile Express SYS_CFG registers, which provide
> a generic means of reading or writing configuration information from
> various parts of the board. We only implement shutdown and reset.
>
> Also make the RESETCTL register RAZ/WI on Versatile Express rather
> than reset the board. Other system registers are generally the same
> as Versatile and Realview.
>
> This includes a VMState version number bump for arm_sysctl,
> since we have new register state to preserve. It also adds
> sys_mci to the VMState while we're bumping the version number
> (an accidental omission from commit b50ff6f5).

vmstate change ok with me.

Later, Juan.
Aurelien Jarno March 21, 2011, 8:39 p.m. UTC | #2
On Mon, Mar 07, 2011 at 11:10:31AM +0000, Peter Maydell wrote:
> Add support for the Versatile Express SYS_CFG registers, which provide
> a generic means of reading or writing configuration information from
> various parts of the board. We only implement shutdown and reset.
> 
> Also make the RESETCTL register RAZ/WI on Versatile Express rather
> than reset the board. Other system registers are generally the same
> as Versatile and Realview.
> 
> This includes a VMState version number bump for arm_sysctl,
> since we have new register state to preserve. It also adds
> sys_mci to the VMState while we're bumping the version number
> (an accidental omission from commit b50ff6f5).
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
>  hw/arm_sysctl.c |   64 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>  1 files changed, 63 insertions(+), 1 deletions(-)

Thanks, applied.

> diff --git a/hw/arm_sysctl.c b/hw/arm_sysctl.c
> index 799b007..b1110b4 100644
> --- a/hw/arm_sysctl.c
> +++ b/hw/arm_sysctl.c
> @@ -27,11 +27,14 @@ typedef struct {
>      uint32_t resetlevel;
>      uint32_t proc_id;
>      uint32_t sys_mci;
> +    uint32_t sys_cfgdata;
> +    uint32_t sys_cfgctrl;
> +    uint32_t sys_cfgstat;
>  } arm_sysctl_state;
>  
>  static const VMStateDescription vmstate_arm_sysctl = {
>      .name = "realview_sysctl",
> -    .version_id = 1,
> +    .version_id = 2,
>      .minimum_version_id = 1,
>      .fields = (VMStateField[]) {
>          VMSTATE_UINT32(leds, arm_sysctl_state),
> @@ -41,6 +44,10 @@ static const VMStateDescription vmstate_arm_sysctl = {
>          VMSTATE_UINT32(flags, arm_sysctl_state),
>          VMSTATE_UINT32(nvflags, arm_sysctl_state),
>          VMSTATE_UINT32(resetlevel, arm_sysctl_state),
> +        VMSTATE_UINT32_V(sys_mci, arm_sysctl_state, 2),
> +        VMSTATE_UINT32_V(sys_cfgdata, arm_sysctl_state, 2),
> +        VMSTATE_UINT32_V(sys_cfgctrl, arm_sysctl_state, 2),
> +        VMSTATE_UINT32_V(sys_cfgstat, arm_sysctl_state, 2),
>          VMSTATE_END_OF_LIST()
>      }
>  };
> @@ -53,6 +60,7 @@ static const VMStateDescription vmstate_arm_sysctl = {
>  #define BOARD_ID_EB 0x140
>  #define BOARD_ID_PBA8 0x178
>  #define BOARD_ID_PBX 0x182
> +#define BOARD_ID_VEXPRESS 0x190
>  
>  static int board_id(arm_sysctl_state *s)
>  {
> @@ -104,6 +112,10 @@ static uint32_t arm_sysctl_read(void *opaque, target_phys_addr_t offset)
>      case 0x38: /* NVFLAGS */
>          return s->nvflags;
>      case 0x40: /* RESETCTL */
> +        if (board_id(s) == BOARD_ID_VEXPRESS) {
> +            /* reserved: RAZ/WI */
> +            return 0;
> +        }
>          return s->resetlevel;
>      case 0x44: /* PCICTL */
>          return 1;
> @@ -142,7 +154,23 @@ static uint32_t arm_sysctl_read(void *opaque, target_phys_addr_t offset)
>      case 0xcc: /* SYS_TEST_OSC3 */
>      case 0xd0: /* SYS_TEST_OSC4 */
>          return 0;
> +    case 0xa0: /* SYS_CFGDATA */
> +        if (board_id(s) != BOARD_ID_VEXPRESS) {
> +            goto bad_reg;
> +        }
> +        return s->sys_cfgdata;
> +    case 0xa4: /* SYS_CFGCTRL */
> +        if (board_id(s) != BOARD_ID_VEXPRESS) {
> +            goto bad_reg;
> +        }
> +        return s->sys_cfgctrl;
> +    case 0xa8: /* SYS_CFGSTAT */
> +        if (board_id(s) != BOARD_ID_VEXPRESS) {
> +            goto bad_reg;
> +        }
> +        return s->sys_cfgstat;
>      default:
> +    bad_reg:
>          printf ("arm_sysctl_read: Bad register offset 0x%x\n", (int)offset);
>          return 0;
>      }
> @@ -190,6 +218,10 @@ static void arm_sysctl_write(void *opaque, target_phys_addr_t offset,
>          s->nvflags &= ~val;
>          break;
>      case 0x40: /* RESETCTL */
> +        if (board_id(s) == BOARD_ID_VEXPRESS) {
> +            /* reserved: RAZ/WI */
> +            break;
> +        }
>          if (s->lockval == LOCK_VALUE) {
>              s->resetlevel = val;
>              if (val & 0x100)
> @@ -216,7 +248,37 @@ static void arm_sysctl_write(void *opaque, target_phys_addr_t offset,
>      case 0x98: /* OSCRESET3 */
>      case 0x9c: /* OSCRESET4 */
>          break;
> +    case 0xa0: /* SYS_CFGDATA */
> +        if (board_id(s) != BOARD_ID_VEXPRESS) {
> +            goto bad_reg;
> +        }
> +        s->sys_cfgdata = val;
> +        return;
> +    case 0xa4: /* SYS_CFGCTRL */
> +        if (board_id(s) != BOARD_ID_VEXPRESS) {
> +            goto bad_reg;
> +        }
> +        s->sys_cfgctrl = val & ~(3 << 18);
> +        s->sys_cfgstat = 1;            /* complete */
> +        switch (s->sys_cfgctrl) {
> +        case 0xc0800000:            /* SYS_CFG_SHUTDOWN to motherboard */
> +            qemu_system_shutdown_request();
> +            break;
> +        case 0xc0900000:            /* SYS_CFG_REBOOT to motherboard */
> +            qemu_system_reset_request();
> +            break;
> +        default:
> +            s->sys_cfgstat |= 2;        /* error */
> +        }
> +        return;
> +    case 0xa8: /* SYS_CFGSTAT */
> +        if (board_id(s) != BOARD_ID_VEXPRESS) {
> +            goto bad_reg;
> +        }
> +        s->sys_cfgstat = val & 3;
> +        return;
>      default:
> +    bad_reg:
>          printf ("arm_sysctl_write: Bad register offset 0x%x\n", (int)offset);
>          return;
>      }
> -- 
> 1.7.1
> 
> 
>
diff mbox

Patch

diff --git a/hw/arm_sysctl.c b/hw/arm_sysctl.c
index 799b007..b1110b4 100644
--- a/hw/arm_sysctl.c
+++ b/hw/arm_sysctl.c
@@ -27,11 +27,14 @@  typedef struct {
     uint32_t resetlevel;
     uint32_t proc_id;
     uint32_t sys_mci;
+    uint32_t sys_cfgdata;
+    uint32_t sys_cfgctrl;
+    uint32_t sys_cfgstat;
 } arm_sysctl_state;
 
 static const VMStateDescription vmstate_arm_sysctl = {
     .name = "realview_sysctl",
-    .version_id = 1,
+    .version_id = 2,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(leds, arm_sysctl_state),
@@ -41,6 +44,10 @@  static const VMStateDescription vmstate_arm_sysctl = {
         VMSTATE_UINT32(flags, arm_sysctl_state),
         VMSTATE_UINT32(nvflags, arm_sysctl_state),
         VMSTATE_UINT32(resetlevel, arm_sysctl_state),
+        VMSTATE_UINT32_V(sys_mci, arm_sysctl_state, 2),
+        VMSTATE_UINT32_V(sys_cfgdata, arm_sysctl_state, 2),
+        VMSTATE_UINT32_V(sys_cfgctrl, arm_sysctl_state, 2),
+        VMSTATE_UINT32_V(sys_cfgstat, arm_sysctl_state, 2),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -53,6 +60,7 @@  static const VMStateDescription vmstate_arm_sysctl = {
 #define BOARD_ID_EB 0x140
 #define BOARD_ID_PBA8 0x178
 #define BOARD_ID_PBX 0x182
+#define BOARD_ID_VEXPRESS 0x190
 
 static int board_id(arm_sysctl_state *s)
 {
@@ -104,6 +112,10 @@  static uint32_t arm_sysctl_read(void *opaque, target_phys_addr_t offset)
     case 0x38: /* NVFLAGS */
         return s->nvflags;
     case 0x40: /* RESETCTL */
+        if (board_id(s) == BOARD_ID_VEXPRESS) {
+            /* reserved: RAZ/WI */
+            return 0;
+        }
         return s->resetlevel;
     case 0x44: /* PCICTL */
         return 1;
@@ -142,7 +154,23 @@  static uint32_t arm_sysctl_read(void *opaque, target_phys_addr_t offset)
     case 0xcc: /* SYS_TEST_OSC3 */
     case 0xd0: /* SYS_TEST_OSC4 */
         return 0;
+    case 0xa0: /* SYS_CFGDATA */
+        if (board_id(s) != BOARD_ID_VEXPRESS) {
+            goto bad_reg;
+        }
+        return s->sys_cfgdata;
+    case 0xa4: /* SYS_CFGCTRL */
+        if (board_id(s) != BOARD_ID_VEXPRESS) {
+            goto bad_reg;
+        }
+        return s->sys_cfgctrl;
+    case 0xa8: /* SYS_CFGSTAT */
+        if (board_id(s) != BOARD_ID_VEXPRESS) {
+            goto bad_reg;
+        }
+        return s->sys_cfgstat;
     default:
+    bad_reg:
         printf ("arm_sysctl_read: Bad register offset 0x%x\n", (int)offset);
         return 0;
     }
@@ -190,6 +218,10 @@  static void arm_sysctl_write(void *opaque, target_phys_addr_t offset,
         s->nvflags &= ~val;
         break;
     case 0x40: /* RESETCTL */
+        if (board_id(s) == BOARD_ID_VEXPRESS) {
+            /* reserved: RAZ/WI */
+            break;
+        }
         if (s->lockval == LOCK_VALUE) {
             s->resetlevel = val;
             if (val & 0x100)
@@ -216,7 +248,37 @@  static void arm_sysctl_write(void *opaque, target_phys_addr_t offset,
     case 0x98: /* OSCRESET3 */
     case 0x9c: /* OSCRESET4 */
         break;
+    case 0xa0: /* SYS_CFGDATA */
+        if (board_id(s) != BOARD_ID_VEXPRESS) {
+            goto bad_reg;
+        }
+        s->sys_cfgdata = val;
+        return;
+    case 0xa4: /* SYS_CFGCTRL */
+        if (board_id(s) != BOARD_ID_VEXPRESS) {
+            goto bad_reg;
+        }
+        s->sys_cfgctrl = val & ~(3 << 18);
+        s->sys_cfgstat = 1;            /* complete */
+        switch (s->sys_cfgctrl) {
+        case 0xc0800000:            /* SYS_CFG_SHUTDOWN to motherboard */
+            qemu_system_shutdown_request();
+            break;
+        case 0xc0900000:            /* SYS_CFG_REBOOT to motherboard */
+            qemu_system_reset_request();
+            break;
+        default:
+            s->sys_cfgstat |= 2;        /* error */
+        }
+        return;
+    case 0xa8: /* SYS_CFGSTAT */
+        if (board_id(s) != BOARD_ID_VEXPRESS) {
+            goto bad_reg;
+        }
+        s->sys_cfgstat = val & 3;
+        return;
     default:
+    bad_reg:
         printf ("arm_sysctl_write: Bad register offset 0x%x\n", (int)offset);
         return;
     }