diff mbox

[v3,6/7] MIPS: Initial support of fulong mini pc (machine construction)

Message ID 1275640812-15416-1-git-send-email-zltjiangshi@gmail.com
State New
Headers show

Commit Message

chen huacai June 4, 2010, 8:40 a.m. UTC
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
---
 Makefile.target    |    2 +-
 hw/mips_fulong2e.c |  402 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 403 insertions(+), 1 deletions(-)
 create mode 100644 hw/mips_fulong2e.c
diff mbox

Patch

diff --git a/Makefile.target b/Makefile.target
index 92ba282..f203c6b 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -221,7 +221,7 @@  obj-mips-y += vga.o i8259.o
 obj-mips-y += g364fb.o jazz_led.o
 obj-mips-y += gt64xxx.o mc146818rtc.o
 obj-mips-y += piix4.o cirrus_vga.o
-obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o
+obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o mips_fulong2e.o
 
 obj-microblaze-y = petalogix_s3adsp1800_mmu.o
 
diff --git a/hw/mips_fulong2e.c b/hw/mips_fulong2e.c
new file mode 100644
index 0000000..1b54236
--- /dev/null
+++ b/hw/mips_fulong2e.c
@@ -0,0 +1,402 @@ 
+/*
+ * QEMU fulong 2e mini pc support
+ *
+ * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
+ * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
+ * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
+ * This code is licensed under the GNU GPL v2.
+ */
+
+/*
+ * Fulong 2e mini pc is based on ICT/ST Loongson 2e CPU (MIPS III like, 800MHz)
+ * http://www.linux-mips.org/wiki/Fulong
+ *
+ * Loongson 2e user manual:
+ * http://www.loongsondeveloper.com/doc/Loongson2EUserGuide.pdf
+ */
+
+#include "hw.h"
+#include "pc.h"
+#include "fdc.h"
+#include "net.h"
+#include "boards.h"
+#include "smbus.h"
+#include "block.h"
+#include "flash.h"
+#include "mips.h"
+#include "mips_cpudevs.h"
+#include "pci.h"
+#include "usb-uhci.h"
+#include "qemu-char.h"
+#include "sysemu.h"
+#include "audio/audio.h"
+#include "qemu-log.h"
+#include "loader.h"
+#include "mips-bios.h"
+#include "ide.h"
+#include "elf.h"
+#include "vt82c686.h"
+#include "mc146818rtc.h"
+
+#define DEBUG_FULONG2E_INIT
+
+#define ENVP_ADDR       0x80002000l
+#define ENVP_NB_ENTRIES	 	16
+#define ENVP_ENTRY_SIZE	 	256
+
+#define MAX_IDE_BUS 2
+#define FULONG_BIOSNAME "pmon_fulong2e.bin"
+
+/* PCI SLOT in fulong 2e */
+#define FULONG2E_VIA_SLOT        5
+#define FULONG2E_ATI_SLOT        6
+#define FULONG2E_RTL8139_SLOT    7
+
+static PITState *pit;
+
+static struct _loaderparams {
+    int ram_size;
+    const char *kernel_filename;
+    const char *kernel_cmdline;
+    const char *initrd_filename;
+} loaderparams;
+
+static void prom_set(uint32_t* prom_buf, int index, const char *string, ...)
+{
+    va_list ap;
+    int32_t table_addr;
+
+    if (index >= ENVP_NB_ENTRIES)
+        return;
+
+    if (string == NULL) {
+        prom_buf[index] = 0;
+        return;
+    }
+
+    table_addr = sizeof(int32_t) * ENVP_NB_ENTRIES + index * ENVP_ENTRY_SIZE;
+    prom_buf[index] = tswap32(ENVP_ADDR + table_addr);
+
+    va_start(ap, string);
+    vsnprintf((char *)prom_buf + table_addr, ENVP_ENTRY_SIZE, string, ap);
+    va_end(ap);
+}
+
+static int64_t load_kernel (CPUState *env)
+{
+    int64_t kernel_entry, kernel_low, kernel_high;
+    int index = 0;
+    long initrd_size;
+    ram_addr_t initrd_offset;
+    uint32_t *prom_buf;
+    long prom_size;
+
+    if (load_elf(loaderparams.kernel_filename, cpu_mips_kseg0_to_phys, NULL,
+                 (uint64_t *)&kernel_entry, (uint64_t *)&kernel_low,
+                 (uint64_t *)&kernel_high, 0, ELF_MACHINE, 1) < 0) {
+        fprintf(stderr, "qemu: could not load kernel '%s'\n",
+                loaderparams.kernel_filename);
+        exit(1);
+    }
+
+    /* load initrd */
+    initrd_size = 0;
+    initrd_offset = 0;
+    if (loaderparams.initrd_filename) {
+        initrd_size = get_image_size (loaderparams.initrd_filename);
+        if (initrd_size > 0) {
+            initrd_offset = (kernel_high + ~TARGET_PAGE_MASK) & TARGET_PAGE_MASK;
+            if (initrd_offset + initrd_size > ram_size) {
+                fprintf(stderr,
+                        "qemu: memory too small for initial ram disk '%s'\n",
+                        loaderparams.initrd_filename);
+                exit(1);
+            }
+            initrd_size = load_image_targphys(loaderparams.initrd_filename,
+                                     initrd_offset, ram_size - initrd_offset);
+        }
+        if (initrd_size == (target_ulong) -1) {
+            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
+                    loaderparams.initrd_filename);
+            exit(1);
+        }
+    }
+
+    /* Setup prom parameters. */
+    prom_size = ENVP_NB_ENTRIES * (sizeof(int32_t) + ENVP_ENTRY_SIZE);
+    prom_buf = qemu_malloc(prom_size);
+
+    prom_set(prom_buf, index++, loaderparams.kernel_filename);
+    if (initrd_size > 0) {
+        prom_set(prom_buf, index++, "rd_start=0x" PRIx64 " rd_size=%li %s",
+                 cpu_mips_phys_to_kseg0(NULL, initrd_offset), initrd_size,
+                 loaderparams.kernel_cmdline);
+    } else {
+        prom_set(prom_buf, index++, loaderparams.kernel_cmdline);
+    }
+
+    /* Setup minimum environment variables */
+    prom_set(prom_buf, index++, "busclock=33000000");
+    prom_set(prom_buf, index++, "cpuclock=100000000");
+    prom_set(prom_buf, index++, "memsize=%i", loaderparams.ram_size/1024/1024);
+    prom_set(prom_buf, index++, "modetty0=38400n8r");
+    prom_set(prom_buf, index++, NULL);
+
+    rom_add_blob_fixed("prom", prom_buf, prom_size,
+                       cpu_mips_kseg0_to_phys(NULL, ENVP_ADDR));
+
+    return kernel_entry;
+}
+
+static void write_bootloader (CPUState *env, uint8_t *base, int64_t kernel_addr)
+{
+    uint32_t *p;
+
+    /* Small bootloader */
+    p = (uint32_t *) base;
+
+    stl_raw(p++, 0x0bf00010);                                      /* j 0x1fc00040 */
+    stl_raw(p++, 0x00000000);                                      /* nop */
+
+    /* Second part of the bootloader */
+    p = (uint32_t *) (base + 0x040);
+
+    stl_raw(p++, 0x3c040000);                                      /* lui a0, 0 */
+    stl_raw(p++, 0x34840002);                                      /* ori a0, a0, 2 */
+    stl_raw(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff));       /* lui a1, high(ENVP_ADDR) */
+    stl_raw(p++, 0x34a50000 | (ENVP_ADDR & 0xffff));               /* ori a1, a0, low(ENVP_ADDR) */
+    stl_raw(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */
+    stl_raw(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff));         /* ori a2, a2, low(ENVP_ADDR + 8) */
+    stl_raw(p++, 0x3c070000 | (loaderparams.ram_size >> 16));      /* lui a3, high(env->ram_size) */
+    stl_raw(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff));   /* ori a3, a3, low(env->ram_size) */
+    stl_raw(p++, 0x3c1f0000 | ((kernel_addr >> 16) & 0xffff));     /* lui ra, high(kernel_addr) */;
+    stl_raw(p++, 0x37ff0000 | (kernel_addr & 0xffff));             /* ori ra, ra, low(kernel_addr) */
+    stl_raw(p++, 0x03e00008);                                      /* jr ra */
+    stl_raw(p++, 0x00000000);                                      /* nop */
+}
+
+
+static void main_cpu_reset(void *opaque)
+{
+    CPUState *env = opaque;
+
+    cpu_reset(env);
+    /* TODO: 2E reset stuff */
+    if (loaderparams.kernel_filename) {
+        env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
+    }
+}
+
+uint8_t eeprom_spd[0x80] = {
+    0x80,0x08,0x07,0x0d,0x09,0x02,0x40,0x00,0x04,0x70,
+    0x70,0x00,0x82,0x10,0x00,0x01,0x0e,0x04,0x0c,0x01,
+    0x02,0x20,0x80,0x75,0x70,0x00,0x00,0x50,0x3c,0x50,
+    0x2d,0x20,0xb0,0xb0,0x50,0x50,0x00,0x00,0x00,0x00,
+    0x00,0x41,0x48,0x3c,0x32,0x75,0x00,0x00,0x00,0x00,
+    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+    0x00,0x00,0x00,0x9c,0x7b,0x07,0x00,0x00,0x00,0x00,
+    0x00,0x00,0x00,0x00,0x48,0x42,0x35,0x34,0x41,0x32,
+    0x35,0x36,0x38,0x4b,0x4e,0x2d,0x41,0x37,0x35,0x42,
+    0x20,0x30,0x20
+};
+
+/* Audio support */
+#ifdef HAS_AUDIO
+static void audio_init (PCIBus *pci_bus)
+{
+    vt82c686b_ac97_init(pci_bus, (FULONG2E_VIA_SLOT << 3) + 5);
+    vt82c686b_mc97_init(pci_bus, (FULONG2E_VIA_SLOT << 3) + 6);
+}
+#endif
+
+/* Network support */
+static void network_init (void)
+{
+    int i;
+
+    for(i = 0; i < nb_nics; i++) {
+        NICInfo *nd = &nd_table[i];
+        const char *default_devaddr = NULL;
+
+        if (i == 0 && (!nd->model || strcmp(nd->model, "rtl8139") == 0)) {
+            /* The fulong board has a RTL8139 card using PCI SLOT 7 */
+            default_devaddr = "07";
+        }
+
+        pci_nic_init_nofail(nd, "rtl8139", default_devaddr);
+    }
+}
+
+static void cpu_request_exit(void *opaque, int irq, int level)
+{
+    CPUState *env = cpu_single_env;
+
+    if (env && level) {
+        cpu_exit(env);
+    }
+}
+
+static void mips_fulong2e_init(ram_addr_t ram_size, const char *boot_device,
+                        const char *kernel_filename, const char *kernel_cmdline,
+                        const char *initrd_filename, const char *cpu_model)
+{
+    char *filename;
+    char buf[1024];
+    unsigned long ram_offset, bios_offset;
+    unsigned long bios_size;
+    int64_t kernel_entry;
+    qemu_irq *i8259;
+    qemu_irq *cpu_exit_irq;
+    int via_devfn;
+    PCIBus *pci_bus;
+    ISADevice *isa_dev;
+    uint8_t *eeprom_buf;
+    i2c_bus *smbus;
+    int i;
+    DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+    DeviceState *eeprom;
+    ISADevice *rtc_state;
+    CPUState *env;
+
+    /* init CPUs */
+    if (cpu_model == NULL) {
+        cpu_model = "Loongson-2E";
+    }
+    env = cpu_init(cpu_model);
+    if (!env) {
+        fprintf(stderr, "Unable to find CPU definition\n");
+        exit(1);
+    }
+
+    register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
+    qemu_register_reset(main_cpu_reset, env);
+
+    /* fulong 2e has 256M ram. */
+    if (ram_size != (256 * 1024 * 1024)) {
+        printf("Warning! RAM size of fulong is not 256M. Set it to 256M\n");
+        ram_size = 256 * 1024 * 1024;
+    }
+
+    /* fulong 2e has a 1M flash.Winbond W39L040AP70Z */
+    bios_size = 1024 * 1024;
+
+    /* allocate RAM */
+    ram_offset = qemu_ram_alloc(ram_size);
+    bios_offset = qemu_ram_alloc(bios_size);
+
+    cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
+    cpu_register_physical_memory(0x1fc00000LL,
+					   bios_size, bios_offset | IO_MEM_ROM);
+
+    /* We do not support flash operation, just loading pmon.bin as raw BIOS.
+     * Please use -L to set the BIOS path and -bios to set bios name. */
+
+    if (kernel_filename) {
+        loaderparams.ram_size = ram_size;
+        loaderparams.kernel_filename = kernel_filename;
+        loaderparams.kernel_cmdline = kernel_cmdline;
+        loaderparams.initrd_filename = initrd_filename;
+        kernel_entry = load_kernel (env);
+        write_bootloader(env, qemu_get_ram_ptr(bios_offset), kernel_entry);
+    } else {
+	    if (bios_name == NULL) {
+		    bios_name = FULONG_BIOSNAME;
+        }
+        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+        if (filename) {
+            bios_size = load_image_targphys(filename, 0x1fc00000LL,
+                                            BIOS_SIZE);
+            qemu_free(filename);
+        } else {
+            bios_size = -1;
+        }
+
+	    if ((bios_size < 0 || bios_size > BIOS_SIZE) && !kernel_filename) {
+            fprintf(stderr, "qemu: Could not load MIPS bios '%s'\n", buf);
+            exit(1);
+	    }
+    }
+
+    /* Init internal devices */
+    cpu_mips_irq_init_cpu(env);
+    cpu_mips_clock_init(env);
+
+    /* Interrupt controller */
+    /* The 8259 -> IP5  */
+    i8259 = i8259_init(env->irq[5]);
+
+    /* North bridge, Bonito --> IP2 */
+    pci_bus = bonito_init((qemu_irq *)&(env->irq[2]));
+
+    /* South bridge */
+    if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
+        fprintf(stderr, "qemu: too many IDE bus\n");
+        exit(1);
+    }
+
+    for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
+        hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
+    }
+
+    via_devfn = vt82c686b_init(pci_bus, FULONG2E_VIA_SLOT << 3);
+    if (via_devfn < 0) {
+        fprintf(stderr, "vt82c686b_init error \n");
+        exit(1);
+    }
+
+    isa_bus_irqs(i8259);
+    vt82c686b_ide_init(pci_bus, hd, (FULONG2E_VIA_SLOT << 3) + 1);
+    usb_uhci_vt82c686b_init(pci_bus, (FULONG2E_VIA_SLOT << 3) + 2);
+    usb_uhci_vt82c686b_init(pci_bus, (FULONG2E_VIA_SLOT << 3) + 3);
+
+    smbus = vt82c686b_pm_init(pci_bus, (FULONG2E_VIA_SLOT << 3) + 4,
+                              0xeee1, NULL);
+    eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
+    memcpy(eeprom_buf, eeprom_spd, sizeof(eeprom_spd));
+    /* TODO: Populate SPD eeprom data.  */
+    eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
+    qdev_prop_set_uint8(eeprom, "address", 0x50);
+    qdev_prop_set_ptr(eeprom, "data", eeprom_buf);
+    qdev_init_nofail(eeprom);
+
+    /* init other devices */
+    pit = pit_init(0x40, isa_reserve_irq(0));
+    cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
+    DMA_init(0, cpu_exit_irq);
+
+    /* Super I/O */
+    isa_dev = isa_create_simple("i8042");
+
+    rtc_state = rtc_init(2000);
+
+    for(i = 0; i < MAX_SERIAL_PORTS; i++) {
+        if (serial_hds[i]) {
+            serial_isa_init(i, serial_hds[i]);
+        }
+    }
+
+    if (parallel_hds[0]) {
+        parallel_init(0, parallel_hds[0]);
+    }
+
+    /* Sound card */
+#ifdef HAS_AUDIO
+    audio_init(pci_bus);
+#endif
+    /* Network card */
+    network_init();
+}
+
+QEMUMachine mips_fulong2e_machine = {
+    .name = "fulong2e",
+    .desc = "Fulong 2e mini pc",
+    .init = mips_fulong2e_init,
+};
+
+static void mips_fulong2e_machine_init(void)
+{
+    qemu_register_machine(&mips_fulong2e_machine);
+}
+
+machine_init(mips_fulong2e_machine_init);