Message ID | 1275327812-27017-2-git-send-email-lcapitulino@redhat.com |
---|---|
State | New |
Headers | show |
On 05/31/2010 12:43 PM, Luiz Capitulino wrote: > From: Jan Kiszka<jan.kiszka@siemens.com> > > Push the doc fragments for the info command to the end of > qemu-monitor.hx. This helps to establish a proper layout in the upcoming > QMP documentation. > > Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com> > Applied all. Thanks. Regards, Anthony Liguori > --- > qemu-monitor.hx | 186 ++++++++++++++++++++++++++++-------------------------- > 1 files changed, 96 insertions(+), 90 deletions(-) > > diff --git a/qemu-monitor.hx b/qemu-monitor.hx > index f4f88df..b8c765b 100644 > --- a/qemu-monitor.hx > +++ b/qemu-monitor.hx > @@ -38,96 +38,6 @@ Commit changes to the disk images (if -snapshot is used) or backing files. > ETEXI > > { > - .name = "info", > - .args_type = "item:s?", > - .params = "[subcommand]", > - .help = "show various information about the system state", > - .user_print = monitor_user_noop, > - .mhandler.cmd_new = do_info, > - }, > - > -STEXI > -@item info @var{subcommand} > -@findex info > -Show various information about the system state. > - > -@table @option > -@item info version > -show the version of QEMU > -@item info commands > -list QMP available commands > -@item info network > -show the various VLANs and the associated devices > -@item info chardev > -show the character devices > -@item info block > -show the block devices > -@item info blockstats > -show block device statistics > -@item info registers > -show the cpu registers > -@item info cpus > -show infos for each CPU > -@item info history > -show the command line history > -@item info irq > -show the interrupts statistics (if available) > -@item info pic > -show i8259 (PIC) state > -@item info pci > -show emulated PCI device info > -@item info tlb > -show virtual to physical memory mappings (i386 only) > -@item info mem > -show the active virtual memory mappings (i386 only) > -@item info hpet > -show state of HPET (i386 only) > -@item info jit > -show dynamic compiler info > -@item info kvm > -show KVM information > -@item info numa > -show NUMA information > -@item info usb > -show USB devices plugged on the virtual USB hub > -@item info usbhost > -show all USB host devices > -@item info profile > -show profiling information > -@item info capture > -show information about active capturing > -@item info snapshots > -show list of VM snapshots > -@item info status > -show the current VM status (running|paused) > -@item info pcmcia > -show guest PCMCIA status > -@item info mice > -show which guest mouse is receiving events > -@item info vnc > -show the vnc server status > -@item info name > -show the current VM name > -@item info uuid > -show the current VM UUID > -@item info cpustats > -show CPU statistics > -@item info usernet > -show user network stack connection states > -@item info migrate > -show migration status > -@item info balloon > -show balloon information > -@item info qtree > -show device tree > -@item info qdm > -show qdev device model list > -@item info roms > -show roms > -@end table > -ETEXI > - > - { > .name = "q|quit", > .args_type = "", > .params = "", > @@ -1190,6 +1100,102 @@ STEXI > Enable the specified QMP capabilities > ETEXI > > + > +HXCOMM Keep the 'info' command at the end! > +HXCOMM This is required for the QMP documentation layout. > + > + { > + .name = "info", > + .args_type = "item:s?", > + .params = "[subcommand]", > + .help = "show various information about the system state", > + .user_print = monitor_user_noop, > + .mhandler.cmd_new = do_info, > + }, > + > +STEXI > +@item info @var{subcommand} > +@findex info > +Show various information about the system state. > + > +@table @option > +@item info version > +show the version of QEMU > +@item info commands > +list QMP available commands > +@item info network > +show the various VLANs and the associated devices > +@item info chardev > +show the character devices > +@item info block > +show the block devices > +@item info blockstats > +show block device statistics > +@item info registers > +show the cpu registers > +@item info cpus > +show infos for each CPU > +@item info history > +show the command line history > +@item info irq > +show the interrupts statistics (if available) > +@item info pic > +show i8259 (PIC) state > +@item info pci > +show emulated PCI device info > +@item info tlb > +show virtual to physical memory mappings (i386 only) > +@item info mem > +show the active virtual memory mappings (i386 only) > +@item info hpet > +show state of HPET (i386 only) > +@item info jit > +show dynamic compiler info > +@item info kvm > +show KVM information > +@item info numa > +show NUMA information > +@item info usb > +show USB devices plugged on the virtual USB hub > +@item info usbhost > +show all USB host devices > +@item info profile > +show profiling information > +@item info capture > +show information about active capturing > +@item info snapshots > +show list of VM snapshots > +@item info status > +show the current VM status (running|paused) > +@item info pcmcia > +show guest PCMCIA status > +@item info mice > +show which guest mouse is receiving events > +@item info vnc > +show the vnc server status > +@item info name > +show the current VM name > +@item info uuid > +show the current VM UUID > +@item info cpustats > +show CPU statistics > +@item info usernet > +show user network stack connection states > +@item info migrate > +show migration status > +@item info balloon > +show balloon information > +@item info qtree > +show device tree > +@item info qdm > +show qdev device model list > +@item info roms > +show roms > +@end table > +ETEXI > + > +HXCOMM DO NOT add new commands after 'info', move your addition before it! > + > STEXI > @end table > ETEXI >
diff --git a/qemu-monitor.hx b/qemu-monitor.hx index f4f88df..b8c765b 100644 --- a/qemu-monitor.hx +++ b/qemu-monitor.hx @@ -38,96 +38,6 @@ Commit changes to the disk images (if -snapshot is used) or backing files. ETEXI { - .name = "info", - .args_type = "item:s?", - .params = "[subcommand]", - .help = "show various information about the system state", - .user_print = monitor_user_noop, - .mhandler.cmd_new = do_info, - }, - -STEXI -@item info @var{subcommand} -@findex info -Show various information about the system state. - -@table @option -@item info version -show the version of QEMU -@item info commands -list QMP available commands -@item info network -show the various VLANs and the associated devices -@item info chardev -show the character devices -@item info block -show the block devices -@item info blockstats -show block device statistics -@item info registers -show the cpu registers -@item info cpus -show infos for each CPU -@item info history -show the command line history -@item info irq -show the interrupts statistics (if available) -@item info pic -show i8259 (PIC) state -@item info pci -show emulated PCI device info -@item info tlb -show virtual to physical memory mappings (i386 only) -@item info mem -show the active virtual memory mappings (i386 only) -@item info hpet -show state of HPET (i386 only) -@item info jit -show dynamic compiler info -@item info kvm -show KVM information -@item info numa -show NUMA information -@item info usb -show USB devices plugged on the virtual USB hub -@item info usbhost -show all USB host devices -@item info profile -show profiling information -@item info capture -show information about active capturing -@item info snapshots -show list of VM snapshots -@item info status -show the current VM status (running|paused) -@item info pcmcia -show guest PCMCIA status -@item info mice -show which guest mouse is receiving events -@item info vnc -show the vnc server status -@item info name -show the current VM name -@item info uuid -show the current VM UUID -@item info cpustats -show CPU statistics -@item info usernet -show user network stack connection states -@item info migrate -show migration status -@item info balloon -show balloon information -@item info qtree -show device tree -@item info qdm -show qdev device model list -@item info roms -show roms -@end table -ETEXI - - { .name = "q|quit", .args_type = "", .params = "", @@ -1190,6 +1100,102 @@ STEXI Enable the specified QMP capabilities ETEXI + +HXCOMM Keep the 'info' command at the end! +HXCOMM This is required for the QMP documentation layout. + + { + .name = "info", + .args_type = "item:s?", + .params = "[subcommand]", + .help = "show various information about the system state", + .user_print = monitor_user_noop, + .mhandler.cmd_new = do_info, + }, + +STEXI +@item info @var{subcommand} +@findex info +Show various information about the system state. + +@table @option +@item info version +show the version of QEMU +@item info commands +list QMP available commands +@item info network +show the various VLANs and the associated devices +@item info chardev +show the character devices +@item info block +show the block devices +@item info blockstats +show block device statistics +@item info registers +show the cpu registers +@item info cpus +show infos for each CPU +@item info history +show the command line history +@item info irq +show the interrupts statistics (if available) +@item info pic +show i8259 (PIC) state +@item info pci +show emulated PCI device info +@item info tlb +show virtual to physical memory mappings (i386 only) +@item info mem +show the active virtual memory mappings (i386 only) +@item info hpet +show state of HPET (i386 only) +@item info jit +show dynamic compiler info +@item info kvm +show KVM information +@item info numa +show NUMA information +@item info usb +show USB devices plugged on the virtual USB hub +@item info usbhost +show all USB host devices +@item info profile +show profiling information +@item info capture +show information about active capturing +@item info snapshots +show list of VM snapshots +@item info status +show the current VM status (running|paused) +@item info pcmcia +show guest PCMCIA status +@item info mice +show which guest mouse is receiving events +@item info vnc +show the vnc server status +@item info name +show the current VM name +@item info uuid +show the current VM UUID +@item info cpustats +show CPU statistics +@item info usernet +show user network stack connection states +@item info migrate +show migration status +@item info balloon +show balloon information +@item info qtree +show device tree +@item info qdm +show qdev device model list +@item info roms +show roms +@end table +ETEXI + +HXCOMM DO NOT add new commands after 'info', move your addition before it! + STEXI @end table ETEXI