diff mbox

[resend,2/6] MIPS: Initial support of vt82686b south bridge used by fulong mini pc

Message ID 1273717885-4088-1-git-send-email-zltjiangshi@gmail.com
State New
Headers show

Commit Message

chen huacai May 13, 2010, 2:31 a.m. UTC
resend by git send-email to avoid line-wrapping

Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
---
 Makefile.target |    2 +-
 hw/pc.h         |    7 +
 hw/pci_ids.h    |    8 +
 hw/vt82c686.c   |  786 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 802 insertions(+), 1 deletions(-)
 create mode 100644 hw/vt82c686.c
diff mbox

Patch

diff --git a/Makefile.target b/Makefile.target
index 63d9f49..4fc1290 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -220,7 +220,7 @@  obj-mips-y += dma.o vga.o i8259.o
 obj-mips-y += g364fb.o jazz_led.o
 obj-mips-y += gt64xxx.o pckbd.o mc146818rtc.o
 obj-mips-y += piix4.o cirrus_vga.o
-obj-mips-$(CONFIG_FULONG) += bonito.o
+obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o
 
 obj-microblaze-y = petalogix_s3adsp1800_mmu.o
 
diff --git a/hw/pc.h b/hw/pc.h
index d11a576..8951609 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -115,6 +115,13 @@  void i440fx_init_memory_mappings(PCII440FXState *d);
 extern PCIDevice *piix4_dev;
 int piix4_init(PCIBus *bus, int devfn);
 
+/* vt82c686.c */
+int vt82c686b_init(PCIBus * bus, int devfn);
+void vt82c686b_ac97_init(PCIBus *bus, int devfn);
+void vt82c686b_mc97_init(PCIBus *bus, int devfn);
+i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
+            qemu_irq sci_irq);
+
 /* vga.c */
 enum vga_retrace_method {
     VGA_RETRACE_DUMB,
diff --git a/hw/pci_ids.h b/hw/pci_ids.h
index fe7a121..39e9f1d 100644
--- a/hw/pci_ids.h
+++ b/hw/pci_ids.h
@@ -78,6 +78,14 @@ 
 
 #define PCI_VENDOR_ID_XILINX             0x10ee
 
+#define PCI_VENDOR_ID_VIA                0x1106
+#define PCI_DEVICE_ID_VIA_ISA_BRIDGE     0x0686
+#define PCI_DEVICE_ID_VIA_IDE            0x0571
+#define PCI_DEVICE_ID_VIA_UHCI           0x3038
+#define PCI_DEVICE_ID_VIA_ACPI           0x3057
+#define PCI_DEVICE_ID_VIA_AC97           0x3058
+#define PCI_DEVICE_ID_VIA_MC97           0x3068
+
 #define PCI_VENDOR_ID_MARVELL            0x11ab
 
 #define PCI_VENDOR_ID_ENSONIQ            0x1274
diff --git a/hw/vt82c686.c b/hw/vt82c686.c
new file mode 100644
index 0000000..1045467
--- /dev/null
+++ b/hw/vt82c686.c
@@ -0,0 +1,786 @@ 
+/*
+ * VT82C686B south bridge support
+ *
+ * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
+ * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
+ * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
+ * This code is licensed under the GNU GPL v2.
+ */
+
+#include "hw.h"
+#include "pc.h"
+#include "i2c.h"
+#include "smbus.h"
+#include "pci.h"
+#include "isa.h"
+#include "sysbus.h"
+#include "mips.h"
+
+typedef uint32_t pci_addr_t;
+#include "pci_host.h"
+//#define DEBUG_VT82C686B
+
+#ifdef DEBUG_VT82C686B
+#define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
+#else
+#define DPRINTF(fmt, ...)
+#endif
+
+typedef struct SuperIOConfig
+{
+    uint8_t config[0xff];
+    uint8_t index;
+    uint8_t data;
+} SuperIOConfig;
+
+typedef struct VT82C686BState {
+    PCIDevice dev;
+    SuperIOConfig *superio_conf;
+} VT82C686BState;
+
+uint32_t smb_data[16];
+static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
+{
+    int can_write;
+    SuperIOConfig *superio_conf = (SuperIOConfig *)opaque;
+
+    DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x  \n", addr, data);
+    if (addr == 0x3f0) {
+        superio_conf->index = data & 0xff;
+    } else {
+        /* 0x3f1 */
+        switch (superio_conf->index) {
+        case 0x00 ... 0xdf:
+        case 0xe4:
+        case 0xe5:
+        case 0xe9 ... 0xed:
+        case 0xf3:
+        case 0xf5:
+        case 0xf7:
+        case 0xf9 ... 0xfb:
+        case 0xfd ... 0xff:
+            can_write = 0;
+            break;
+        default:
+            can_write = 1;
+
+            if (can_write) {
+                switch (superio_conf->index) {
+                case 0xe7:
+                    if ((data & 0xff) != 0xfe) {
+                        DPRINTF("chage uart 1 base. unsupported yet \n");
+                    }
+                    break;
+                case 0xe8:
+                    if ((data & 0xff) != 0xbe) {
+                        DPRINTF("chage uart 2 base. unsupported yet \n");
+                    }
+                    break;
+
+                default:
+                    superio_conf->config[superio_conf->index] = data & 0xff;
+                }
+            }
+        }
+        superio_conf->config[superio_conf->index] = data & 0xff;
+    }
+}
+
+static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
+{
+    SuperIOConfig *superio_conf = (SuperIOConfig *)opaque;
+
+    DPRINTF("superio_ioport_readb  address 0x%x   \n", addr);
+    return (superio_conf->config[superio_conf->index]);
+}
+
+static void vt82c686b_reset(void * opaque)
+{
+    PCIDevice *d = opaque;
+    uint8_t *pci_conf = d->config;
+    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
+
+    pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
+
+    pci_conf[0x04] = 0x87; /* master, memory, I/O and special */
+    pci_conf[0x05] = 0x00;
+    pci_conf[0x06] = 0x00;
+    pci_conf[0x07] = 0x02;
+    /* Miscellaneous Control, Port 70/74 Access Status,IDE interrupt Routing */
+    pci_conf[0x48] = 0x01;
+    pci_conf[0x4a] = 0x04;
+    pci_conf[0x4f] = 0x03;  /* DMA/Master Mem Access Control 1/2/3 */
+    /* IDE Primary Channel IRQ Routing -> IRQ 14 */
+    /* IDE Secondary Channel IRQ Routing -> IRQ 15 */
+    /* PnP DMA Request Control, PnP Routing for LPT/FDC IRQ,
+     * PnP Routing for COM2/COM1 IRQ */
+    pci_conf[0x50] = 0x2d;
+    pci_conf[0x59] = 0x04;
+    pci_conf[0x5a] = 0x04;
+    pci_conf[0x5f] = 0x04;
+    pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
+    pci_conf[0x84] = 0x10;
+
+    vt82c->superio_conf->config[0xe0] = 0x3c;
+    vt82c->superio_conf->config[0xe2] = 0x03;
+    vt82c->superio_conf->config[0xe3] = 0xfc;
+    vt82c->superio_conf->config[0xe6] = 0xde;
+    vt82c->superio_conf->config[0xe7] = 0xfe;
+    vt82c->superio_conf->config[0xe8] = 0xbe;
+}
+
+/* read config pci function0 registers. PCI-ISA bridge */
+static uint32_t vt82c686b_read_config(PCIDevice * d, uint32_t address, int len)
+{
+    uint32_t val;
+
+    DPRINTF("vt82c686b_read_config  address 0x%x  len 0x%x \n", address, len);
+    switch (len) {
+    default:
+    case 4:
+        if (address <= 0xfc) {
+            val = le32_to_cpu(*(uint32_t *) (d->config + address));
+            break;
+        }
+        /* fall through */
+    case 2:
+        if (address <= 0xfe) {
+            val = le16_to_cpu(*(uint16_t *) (d->config + address));
+            break;
+        }
+        /* fall through */
+    case 1:
+        val = d->config[address];
+        break;
+    }
+    return val;
+}
+
+/* write config pci function0 registers. PCI-ISA bridge */
+static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
+                                   uint32_t val, int len)
+{
+    int can_write, i;
+    uint32_t  addr;
+    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
+
+    DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x \n",
+           address, val, len);
+
+    /* not efficient, but simple */
+    addr = address;
+    for (i = 0; i < len; i++) {
+        /* default read/write accesses */
+        switch (addr) {
+        case 0x00 ... 0x03:
+        case 0x08 ... 0x3f:
+            can_write = 0;
+            break;
+        default:
+            can_write = 1;
+            break;
+        }
+        if (can_write) {
+            switch (addr) {
+            case 0x85:
+                /* enable or disable super IO configure */
+                if (val & 0x2) {
+                    /* floppy also uses 0x3f0 and 0x3f1.
+                     * But we do not emulate flopy,so just set it here. */
+                    isa_unassign_ioport(0x3f0, 2);
+                    register_ioport_read(0x3f0, 2, 1, superio_ioport_readb,
+                                         vt82c->superio_conf);
+                    register_ioport_write(0x3f0, 2, 1, superio_ioport_writeb,
+                                          vt82c->superio_conf);
+                } else {
+                    isa_unassign_ioport(0x3f0, 2);
+                }
+                break;
+            }
+
+            d->config[addr] = val;
+        } else {
+            fprintf(stderr, "warning. vt82c686b_write_config: "
+                    "write to read only pci conf register addr 0x%x\n", addr);
+        }
+        if (++addr > 0xff)
+            break;
+        val >>= 8;
+    }
+}
+
+static void vt82c686b_save(QEMUFile * f, void *opaque)
+{
+    PCIDevice *d = opaque;
+    pci_device_save(d, f);
+}
+
+static int vt82c686b_load(QEMUFile * f, void *opaque, int version_id)
+{
+    PCIDevice *d = opaque;
+    if (version_id != 1)
+        return -EINVAL;
+    return pci_device_load(d, f);
+}
+
+
+#define PM_FREQ 3579545
+
+#define ACPI_DBG_IO_ADDR  0xb044
+
+typedef struct VT686PMState {
+    PCIDevice dev;
+    uint16_t pmsts;
+    uint16_t pmen;
+    uint16_t pmcntrl;
+    uint8_t apmc;
+    uint8_t apms;
+    QEMUTimer *tmr_timer;
+    int64_t tmr_overflow_time;
+    i2c_bus *smbus;
+    uint8_t smb_stat;
+    uint8_t smb_ctl;
+    uint8_t smb_cmd;
+    uint8_t smb_addr;
+    uint8_t smb_data0;
+    uint8_t smb_data1;
+    uint8_t smb_data[32];
+    uint8_t smb_index;
+} VT686PMState;
+
+typedef struct VT686AC97State {
+    PCIDevice dev;
+    int unused;
+} VT686AC97State;
+
+typedef struct VT686MC97State {
+    PCIDevice dev;
+    int unused;
+} VT686MC97State;
+
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+
+#define SCI_EN (1 << 0)
+
+#define SUS_EN (1 << 13)
+
+#define ACPI_ENABLE 0xf1
+#define ACPI_DISABLE 0xf0
+
+#define SMBHSTSTS 0x00
+#define SMBHSTCNT 0x02
+#define SMBHSTCMD 0x03
+#define SMBHSTADD 0x04
+#define SMBHSTDAT0 0x05
+#define SMBHSTDAT1 0x06
+#define SMBBLKDAT 0x07
+
+static uint32_t get_pmtmr(VT686PMState *s)
+{
+    uint32_t d;
+    d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+    return d & 0xffffff;
+}
+
+static int get_pmsts(VT686PMState *s)
+{
+    int64_t d;
+    int pmsts;
+    pmsts = s->pmsts;
+    d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+    if (d >= s->tmr_overflow_time)
+        s->pmsts |= TMROF_EN;
+    return pmsts;
+}
+
+static void pm_update_sci(VT686PMState *s)
+{
+    int sci_level, pmsts;
+    int64_t expire_time;
+
+    pmsts = get_pmsts(s);
+    sci_level = (((pmsts & s->pmen) &
+                  (RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0);
+    qemu_set_irq(s->dev.irq[0], sci_level);
+    /* schedule a timer interruption if needed */
+    if ((s->pmen & TMROF_EN) && !(pmsts & TMROF_EN)) {
+        expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), PM_FREQ);
+        qemu_mod_timer(s->tmr_timer, expire_time);
+    } else {
+        qemu_del_timer(s->tmr_timer);
+    }
+}
+
+static void pm_tmr_timer(void *opaque)
+{
+    VT686PMState *s = opaque;
+    pm_update_sci(s);
+}
+
+static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
+{
+    VT686PMState *s = opaque;
+
+    addr &= 0x0f;
+    switch (addr) {
+    case 0x00:
+        {
+            int64_t d;
+            int pmsts;
+            pmsts = get_pmsts(s);
+            if (pmsts & val & TMROF_EN) {
+                /* if TMRSTS is reset, then compute the new overflow time */
+                d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+                s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
+            }
+            s->pmsts &= ~val;
+            pm_update_sci(s);
+        }
+        break;
+    case 0x02:
+        s->pmen = val;
+        pm_update_sci(s);
+        break;
+    case 0x04:
+        {
+            int sus_typ;
+            s->pmcntrl = val & ~(SUS_EN);
+            if (val & SUS_EN) {
+                /* change suspend type */
+                sus_typ = (val >> 10) & 3;
+                switch (sus_typ) {
+                case 0: /* soft power off */
+                    qemu_system_shutdown_request();
+                    break;
+                default:
+                    break;
+                }
+            }
+        }
+        break;
+    default:
+        break;
+    }
+    DPRINTF("PM writew port=0x%04x val=0x%02x\n", addr, val);
+}
+
+static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
+{
+    VT686PMState *s = opaque;
+    uint32_t val;
+
+    addr &= 0x0f;
+    switch (addr) {
+    case 0x00:
+        val = get_pmsts(s);
+        break;
+    case 0x02:
+        val = s->pmen;
+        break;
+    case 0x04:
+        val = s->pmcntrl;
+        break;
+    default:
+        val = 0;
+        break;
+    }
+    DPRINTF("PM readw port=0x%04x val=0x%02x\n", addr, val);
+    return val;
+}
+
+static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
+{
+    addr &= 0x0f;
+    DPRINTF("PM writel port=0x%04x val=0x%08x\n", addr, val);
+}
+
+static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
+{
+    VT686PMState *s = opaque;
+    uint32_t val;
+
+    addr &= 0x0f;
+    switch (addr) {
+    case 0x08:
+        val = get_pmtmr(s);
+        break;
+    default:
+        val = 0;
+        break;
+    }
+    DPRINTF("PM readl port=0x%04x val=0x%08x\n", addr, val);
+    return val;
+}
+
+static void smb_transaction(VT686PMState *s)
+{
+    uint8_t prot = (s->smb_ctl >> 2) & 0x07;
+    uint8_t read = s->smb_addr & 0x01;
+    uint8_t cmd = s->smb_cmd;
+    uint8_t addr = s->smb_addr >> 1;
+    i2c_bus *bus = s->smbus;
+
+    DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
+    switch (prot) {
+    case 0x0:
+        smbus_quick_command(bus, addr, read);
+        break;
+    case 0x1:
+        if (read) {
+            s->smb_data0 = smbus_receive_byte(bus, addr);
+        } else {
+            smbus_send_byte(bus, addr, cmd);
+        }
+        break;
+    case 0x2:
+        if (read) {
+            s->smb_data0 = smbus_read_byte(bus, addr, cmd);
+            printf("smbus_read_byte:0x%04x\n",s->smb_data0);
+        } else {
+            smbus_write_byte(bus, addr, cmd, s->smb_data0);
+            printf("smbus_write_byte\n");
+        }
+        break;
+    case 0x3:
+        if (read) {
+            uint16_t val;
+            val = smbus_read_word(bus, addr, cmd);
+            s->smb_data0 = val;
+            s->smb_data1 = val >> 8;
+        } else {
+            smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0);
+        }
+        break;
+    case 0x5:
+        if (read) {
+            s->smb_data0 = smbus_read_block(bus, addr, cmd, s->smb_data);
+        } else {
+            smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0);
+        }
+        break;
+    default:
+        goto error;
+    }
+    return;
+
+  error:
+    s->smb_stat |= 0x04;
+}
+
+static void smb_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+    VT686PMState *s = opaque;
+
+    addr &= 0x0f;
+    DPRINTF("SMB writeb port=0x%04x val=0x%02x\n", addr, val);
+
+    switch (addr) {
+    case SMBHSTSTS:
+        s->smb_stat = 0;
+        s->smb_index = 0;
+        break;
+    case SMBHSTCNT:
+        s->smb_ctl = val;
+        if (val & 0x40) {
+            smb_transaction(s);
+        }
+        break;
+    case SMBHSTCMD:
+        s->smb_cmd = val;
+        break;
+    case SMBHSTADD:
+        s->smb_addr = val;
+        break;
+    case SMBHSTDAT0:
+        s->smb_data0 = val;
+        break;
+    case SMBHSTDAT1:
+        s->smb_data1 = val;
+        break;
+    case SMBBLKDAT:
+        s->smb_data[s->smb_index++] = val;
+        if (s->smb_index > 31) {
+            s->smb_index = 0;
+        }
+        break;
+    default:
+        break;
+    }
+}
+
+static uint32_t smb_ioport_readb(void *opaque, uint32_t addr)
+{
+    VT686PMState *s = opaque;
+    uint32_t val;
+    addr &= 0x0f;
+
+    switch (addr) {
+    case SMBHSTSTS:
+        val = s->smb_stat;
+        break;
+    case SMBHSTCNT:
+        s->smb_index = 0;
+        val = s->smb_ctl & 0x1f;
+        break;
+    case SMBHSTCMD:
+        val = s->smb_cmd;
+        break;
+    case SMBHSTADD:
+        val = s->smb_addr;
+        break;
+    case SMBHSTDAT0:
+        val = s->smb_data0;
+        break;
+    case SMBHSTDAT1:
+        val = s->smb_data1;
+        break;
+    case SMBBLKDAT:
+        val = s->smb_data[s->smb_index++];
+        if (s->smb_index > 31)
+            s->smb_index = 0;
+        break;
+    default:
+        val = 0;
+        break;
+    }
+    DPRINTF("SMB readb port=0x%04x val=0x%02x\n", addr, val);
+    return val;
+}
+
+static void pm_io_space_update(VT686PMState *s)
+{
+    uint32_t pm_io_base;
+
+    if (s->dev.config[0x80] & 1) {
+        pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
+        pm_io_base &= 0xffc0;
+
+        /* XXX: need to improve memory and ioport allocation */
+        DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
+        register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
+        register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
+        register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
+        register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
+    }
+}
+
+/* read config pci function4 registers. PM*/
+static uint32_t pm_read_config(PCIDevice * d, uint32_t address, int len)
+{
+    uint32_t val;
+
+    DPRINTF("pm_read_config  address 0x%x  len 0x%x \n", address, len);
+    switch (len) {
+    default:
+    case 4:
+        if (address <= 0xfc) {
+            val = le32_to_cpu(*(uint32_t *) (d->config + address));
+            break;
+        }
+        /* fall through */
+    case 2:
+        if (address <= 0xfe) {
+            val = le16_to_cpu(*(uint16_t *) (d->config + address));
+            break;
+        }
+        /* fall through */
+    case 1:
+        val = d->config[address];
+        break;
+    }
+    return val;
+
+}
+
+static void pm_write_config(PCIDevice *d,
+                            uint32_t address, uint32_t val, int len)
+{
+    DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x \n",
+           address, val, len);
+    pci_default_write_config(d, address, val, len);
+}
+
+static void pm_save(QEMUFile* f,void *opaque)
+{
+    VT686PMState *s = opaque;
+
+    pci_device_save(&s->dev, f);
+
+    qemu_put_be16s(f, &s->pmsts);
+    qemu_put_be16s(f, &s->pmen);
+    qemu_put_be16s(f, &s->pmcntrl);
+    qemu_put_8s(f, &s->apmc);
+    qemu_put_8s(f, &s->apms);
+    qemu_put_timer(f, s->tmr_timer);
+    qemu_put_be64(f, s->tmr_overflow_time);
+}
+
+static int pm_load(QEMUFile* f,void* opaque,int version_id)
+{
+    VT686PMState *s = opaque;
+    int ret;
+
+    if (version_id > 1)
+        return -EINVAL;
+
+    ret = pci_device_load(&s->dev, f);
+    if (ret < 0)
+        return ret;
+
+    qemu_get_be16s(f, &s->pmsts);
+    qemu_get_be16s(f, &s->pmen);
+    qemu_get_be16s(f, &s->pmcntrl);
+    qemu_get_8s(f, &s->apmc);
+    qemu_get_8s(f, &s->apms);
+    qemu_get_timer(f, s->tmr_timer);
+    s->tmr_overflow_time=qemu_get_be64(f);
+
+    pm_io_space_update(s);
+
+    return 0;
+}
+
+/*
+ * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
+ * just register a PCI device now, functionalities will be implemented later.
+ */
+
+void vt82c686b_ac97_init(PCIBus *bus, int devfn)
+{
+    VT686AC97State *s;
+    uint8_t *pci_conf;
+
+    s = (VT686AC97State *)pci_register_device(bus,
+                                         "vt82c686b_AC97", sizeof(VT686AC97State),
+                                         devfn, NULL, NULL);
+    pci_conf = s->dev.config;
+    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_AC97);
+    pci_config_set_class(pci_conf, PCI_CLASS_MULTIMEDIA_AUDIO);
+    pci_config_set_revision(pci_conf, 0x50);
+
+    pci_set_long(pci_conf + 0x04, 0x02100050);
+    pci_set_long(pci_conf + 0x10, 0x00000001);
+    pci_set_long(pci_conf + 0x14, 0x00000001);
+    pci_set_long(pci_conf + 0x3c, 0x00000300);
+    pci_set_long(pci_conf + 0x40, 0x1c000000);
+}
+
+void vt82c686b_mc97_init(PCIBus *bus, int devfn)
+{
+    VT686MC97State *s;
+    uint8_t *pci_conf;
+
+    s = (VT686MC97State *)pci_register_device(bus,
+                                         "vt82c686b_MC97", sizeof(VT686MC97State),
+                                         devfn, NULL, NULL);
+    pci_conf = s->dev.config;
+    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_MC97);
+    pci_config_set_class(pci_conf, PCI_CLASS_COMMUNICATION_OTHER);
+    pci_config_set_revision(pci_conf, 0x30);
+
+    pci_set_long(pci_conf + 0x04, 0x02000030);
+    pci_set_long(pci_conf + 0x10, 0x00000001);
+    pci_set_long(pci_conf + 0x14, 0x00000001);
+    pci_set_long(pci_conf + 0x3c, 0x00000300);
+    pci_set_long(pci_conf + 0x40, 0x1c000000);
+
+}
+
+/* vt82c686 pm init */
+i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
+			qemu_irq sci_irq)
+{
+    VT686PMState *s;
+    uint8_t *pci_conf;
+
+    s = (VT686PMState *)pci_register_device(bus,
+                                         "vt82c686b_PM", sizeof(VT686PMState),
+                                         devfn, pm_read_config, pm_write_config);
+    pci_conf = s->dev.config;
+    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_ACPI);
+    pci_config_set_revision(pci_conf, 0x40);
+    pci_conf[0x04] = 0x00;
+    pci_conf[0x05] = 0x00;
+    pci_conf[0x06] = 0x80;
+    pci_conf[0x07] = 0x02;
+
+    pci_set_long(pci_conf + 0x34, 0x00000068);
+    pci_set_long(pci_conf + 0x48, 0x00000001);
+    pci_set_long(pci_conf + 0x68, 0x00020001);
+    pci_set_long(pci_conf + 0x70, 0x00000001);
+
+    /* SMB ports:0xeee0~0xeeef */
+    smb_io_base =((smb_io_base & 0xfff0) + 0x0);
+    pci_conf[0x90] = smb_io_base | 1;
+    pci_conf[0x91] = smb_io_base >> 8;
+    pci_conf[0xd2] = 0x90;
+    register_ioport_write(smb_io_base, 0xf, 1, smb_ioport_writeb, s);
+    register_ioport_read(smb_io_base, 0xf, 1, smb_ioport_readb, s);
+
+    s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
+
+    register_savevm("vt82c686b_PM", 0, 1, pm_save, pm_load, s);
+
+    s->smbus = i2c_init_bus(NULL, "i2c");
+    return s->smbus;
+}
+
+
+
+/* init the PCI-to-ISA bridge */
+static int vt82c686b_initfn(PCIDevice *d)
+{
+    uint8_t *pci_conf;
+
+    isa_bus_new(&d->qdev);
+    register_savevm("vt82c686b", 0, 1, vt82c686b_save, vt82c686b_load, d);
+
+    pci_conf = d->config;
+    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_ISA_BRIDGE);
+    pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_ISA);
+    pci_config_set_prog_interface(pci_conf, 0x0);
+    pci_config_set_revision(pci_conf,0x40); /* Revision 4.0 */
+    pci_conf[PCI_HEADER_TYPE] =
+        PCI_HEADER_TYPE_NORMAL | PCI_HEADER_TYPE_MULTI_FUNCTION;
+
+    qemu_register_reset(vt82c686b_reset, d);
+
+    return d->devfn;
+}
+
+int vt82c686b_init(PCIBus *bus, int devfn)
+{
+    PCIDevice *d;
+    VT82C686BState *vt82c;
+
+    d = pci_create_simple(bus, devfn, "VT82C686B");
+    vt82c = DO_UPCAST(VT82C686BState, dev, d);
+
+    /* set super io config */
+    vt82c->superio_conf = qemu_mallocz(sizeof(SuperIOConfig));
+
+    return d->devfn;
+}
+
+static PCIDeviceInfo via_info = {
+    .qdev.name    = "VT82C686B",
+    .qdev.desc    = "ISA bridge",
+    .qdev.size    = sizeof(VT82C686BState),
+    .qdev.no_user = 1,
+    .init         = vt82c686b_initfn,
+    .config_read  = vt82c686b_read_config,
+    .config_write = vt82c686b_write_config,
+};
+
+static void vt82c686b_register(void)
+{
+    pci_qdev_register(&via_info);
+}
+device_init(vt82c686b_register);