diff mbox

[3/8] virtio-serial-bus: Maintain guest and host port open/close state

Message ID 1263475063-15238-4-git-send-email-amit.shah@redhat.com
State New
Headers show

Commit Message

Amit Shah Jan. 14, 2010, 1:17 p.m. UTC
Via control channel messages, the guest can tell us whether a port got
opened or closed. Similarly, we can also indicate to the guest of host
port open/close events.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
 hw/virtio-serial-bus.c |   91 ++++++++++++++++++++++++++++++++++++++++++++++++
 hw/virtio-serial.c     |    6 +++
 hw/virtio-serial.h     |    6 +++
 3 files changed, 103 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/hw/virtio-serial-bus.c b/hw/virtio-serial-bus.c
index fcb86a6..276de6a 100644
--- a/hw/virtio-serial-bus.c
+++ b/hw/virtio-serial-bus.c
@@ -160,11 +160,22 @@  static size_t send_control_event(VirtIOSerialPort *port, uint16_t event,
 /* Functions for use inside qemu to open and read from/write to ports */
 int virtio_serial_open(VirtIOSerialPort *port)
 {
+    /* Don't allow opening an already-open port */
+    if (port->host_connected) {
+        return 0;
+    }
+    /* Send port open notification to the guest */
+    port->host_connected = true;
+    send_control_event(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
     return 0;
 }
 
 int virtio_serial_close(VirtIOSerialPort *port)
 {
+    port->host_connected = false;
+    send_control_event(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
     return 0;
 }
 
@@ -172,6 +183,9 @@  int virtio_serial_close(VirtIOSerialPort *port)
 ssize_t virtio_serial_write(VirtIOSerialPort *port, const uint8_t *buf,
                             size_t size)
 {
+    if (!port || !port->host_connected || !port->guest_connected) {
+        return 0;
+    }
     return write_to_port(port, buf, size);
 }
 
@@ -192,6 +206,9 @@  size_t virtio_serial_guest_ready(VirtIOSerialPort *port)
         virtio_queue_empty(vq)) {
         return 0;
     }
+    if (use_multiport(port->vser) && !port->guest_connected) {
+        return 0;
+    }
 
     size = 4096;
     if (virtqueue_avail_bytes(vq, size, 0)) {
@@ -230,6 +247,11 @@  static void handle_control_message(VirtIOSerial *vser, void *buf)
         if (port->is_console) {
             send_control_event(port, VIRTIO_CONSOLE_CONSOLE_PORT, 1);
         }
+
+        if (port->host_connected) {
+            send_control_event(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
+        }
+
         /*
          * When the guest has asked us for this information it means
          * the guest is all setup and has its virtqueues
@@ -240,6 +262,19 @@  static void handle_control_message(VirtIOSerial *vser, void *buf)
             port->info->guest_ready(port);
         }
         break;
+
+    case VIRTIO_CONSOLE_PORT_OPEN:
+        port->guest_connected = cpkt.value;
+        if (cpkt.value && port->info->guest_open) {
+            /* Send the guest opened notification if an app is interested */
+            port->info->guest_open(port);
+        }
+
+        if (!cpkt.value && port->info->guest_close) {
+            /* Send the guest closed notification if an app is interested */
+            port->info->guest_close(port);
+        }
+        break;
     }
 }
 
@@ -334,6 +369,8 @@  static void set_config(VirtIODevice *vdev, const uint8_t *config_data)
 static void virtio_serial_save(QEMUFile *f, void *opaque)
 {
     VirtIOSerial *s = opaque;
+    VirtIOSerialPort *port;
+    uint32_t nr_active_ports;
 
     /* The virtio device */
     virtio_save(&s->vdev, f);
@@ -342,15 +379,42 @@  static void virtio_serial_save(QEMUFile *f, void *opaque)
     qemu_put_be16s(f, &s->config.cols);
     qemu_put_be16s(f, &s->config.rows);
     qemu_put_be32s(f, &s->config.nr_ports);
+
+    /* Items in struct VirtIOSerial */
+
+    /* Do this because we might have hot-unplugged some ports */
+    nr_active_ports = 0;
+    QTAILQ_FOREACH(port, &s->ports, next)
+        nr_active_ports++;
+
+    qemu_put_be32s(f, &nr_active_ports);
+
+    /*
+     * Items in struct VirtIOSerialPort.
+     */
+    QTAILQ_FOREACH(port, &s->ports, next) {
+        /*
+         * We put the port number because we may not have an active
+         * port at id 0 that's reserved for a console port, or in case
+         * of ports that might have gotten unplugged
+         */
+        qemu_put_be32s(f, &port->id);
+        qemu_put_byte(f, port->guest_connected);
+
+    }
 }
 
 static int virtio_serial_load(QEMUFile *f, void *opaque, int version_id)
 {
     VirtIOSerial *s = opaque;
+    VirtIOSerialPort *port;
+    uint32_t nr_active_ports;
+    unsigned int i;
 
     if (version_id > 2) {
         return -EINVAL;
     }
+
     /* The virtio device */
     virtio_load(&s->vdev, f);
 
@@ -363,6 +427,21 @@  static int virtio_serial_load(QEMUFile *f, void *opaque, int version_id)
     qemu_get_be16s(f, &s->config.rows);
     s->config.nr_ports = qemu_get_be32(f);
 
+    /* Items in struct VirtIOSerial */
+
+    qemu_get_be32s(f, &nr_active_ports);
+
+    /* Items in struct VirtIOSerialPort */
+    for (i = 0; i < nr_active_ports; i++) {
+        uint32_t id;
+
+        id = qemu_get_be32(f);
+        port = find_port_by_id(s, id);
+
+        port->guest_connected = qemu_get_byte(f);
+
+    }
+
     return 0;
 }
 
@@ -392,6 +471,10 @@  static void virtser_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)
 
     monitor_printf(mon, "%*s dev-prop-int: id: %u\n",
                    indent, "", port->id);
+    monitor_printf(mon, "%*s dev-prop-int: guest_connected: %d\n",
+                   indent, "", port->guest_connected);
+    monitor_printf(mon, "%*s dev-prop-int: host_connected: %d\n",
+                   indent, "", port->host_connected);
 }
 
 static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base)
@@ -425,6 +508,14 @@  static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base)
 
     port->id = plugging_port0 ? 0 : port->vser->config.nr_ports++;
 
+    if (!use_multiport(port->vser)) {
+        /*
+         * Allow writes to guest in this case; we have no way of
+         * knowing if a guest port is connected.
+         */
+        port->guest_connected = true;
+    }
+
     QTAILQ_INSERT_TAIL(&port->vser->ports, port, next);
     port->ivq = port->vser->ivqs[port->id];
     port->ovq = port->vser->ovqs[port->id];
diff --git a/hw/virtio-serial.c b/hw/virtio-serial.c
index 9d003f8..d9a6f32 100644
--- a/hw/virtio-serial.c
+++ b/hw/virtio-serial.c
@@ -68,6 +68,12 @@  static int virtconsole_initfn(VirtIOSerialDevice *dev)
 
     port->is_console = true;
 
+    /*
+     * For console ports, just assume the guest is ready to accept our
+     * data.
+     */
+    port->guest_connected = true;
+
     if (vcon->chr) {
         qemu_chr_add_handlers(vcon->chr, chr_can_read, chr_read, chr_event,
                               vcon);
diff --git a/hw/virtio-serial.h b/hw/virtio-serial.h
index 9aac856..1576eef 100644
--- a/hw/virtio-serial.h
+++ b/hw/virtio-serial.h
@@ -53,6 +53,7 @@  struct virtio_console_header {
 #define VIRTIO_CONSOLE_PORT_READY	0
 #define VIRTIO_CONSOLE_CONSOLE_PORT	1
 #define VIRTIO_CONSOLE_RESIZE		2
+#define VIRTIO_CONSOLE_PORT_OPEN	3
 
 /* == In-qemu interface == */
 
@@ -96,6 +97,11 @@  struct VirtIOSerialPort {
 
     /* Identify if this is a port that binds with hvc in the guest */
     uint8_t is_console;
+
+    /* Is the corresponding guest device open? */
+    bool guest_connected;
+    /* Is this device open for IO on the host? */
+    bool host_connected;
 };
 
 struct VirtIOSerialPortInfo {