[ovs-dev,19/26] tests: Add macro for OFTABLE_CHK_IN_PORT_SEC table number.

Message ID	20240201161804.210604-20-amusil@redhat.com
State	Superseded
Headers	show Return-Path: <ovs-dev-bounces@openvswitch.org> From: Ales Musil <amusil@redhat.com> To: dev@openvswitch.org Date: Thu, 1 Feb 2024 17:17:57 +0100 Message-ID: <20240201161804.210604-20-amusil@redhat.com> In-Reply-To: <20240201161804.210604-1-amusil@redhat.com> References: <20240201161804.210604-1-amusil@redhat.com> MIME-Version: 1.0 Subject: [ovs-dev] [PATCH ovn 19/26] tests: Add macro for OFTABLE_CHK_IN_PORT_SEC table number. Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: ovs-dev-bounces@openvswitch.org Sender: "dev" <ovs-dev-bounces@openvswitch.org>
Series	Remove most of the hardcoded table numbers \| expand [ovs-dev,00/26] Remove most of the hardcoded table numbers [ovs-dev,01/26] tests: Add macro to strip table numbers from lflows. [ovs-dev,02/26] tests: Use ovn_strip_lflows instead of single ? for the replace. [ovs-dev,03/26] tests: Use ovn_strip_lflows for cases with sort before sed. [ovs-dev,04/26] tests: Use ovn_strip_lflows for cases without sort. [ovs-dev,05/26] tests: Use ovn_strip_lflows for the rest of lflows. [ovs-dev,06/26] tests: Add macro for OFTABLE_PHY_TO_LOG table number. [ovs-dev,07/26] tests: Add macro for OFTABLE_LOG_INGRESS_PIPELINE table number. [ovs-dev,08/26] tests: Add macro for OFTABLE_OUTPUT_LARGE_PKT_DETECT table number. [ovs-dev,09/26] tests: Add macro for OFTABLE_REMOTE_OUTPUT table number. [ovs-dev,10/26] tests: Add macro for OFTABLE_LOCAL_OUTPUT table number. [ovs-dev,11/26] tests: Add macro for OFTABLE_LOG_TO_PHY table number. [ovs-dev,12/26] tests: Add macro for OFTABLE_MAC_BINDING table number. [ovs-dev,13/26] tests: Add macro for OFTABLE_MAC_LOOKUP table number. [ovs-dev,14/26] tests: Add macro for OFTABLE_CHK_LB_HAIRPIN table number. [ovs-dev,15/26] tests: Add macro for OFTABLE_CHK_LB_HAIRPIN_REPLY table number. [ovs-dev,16/26] tests: Add macro for OFTABLE_CT_SNAT_HAIRPIN table number. [ovs-dev,17/26] tests: Add macro for OFTABLE_GET_FDB table number. [ovs-dev,18/26] tests: Add macro for OFTABLE_LOOKUP_FDB table number. [ovs-dev,19/26] tests: Add macro for OFTABLE_CHK_IN_PORT_SEC table number. [ovs-dev,20/26] tests: Add macro for OFTABLE_CHK_IN_PORT_SEC_ND table number. [ovs-dev,21/26] tests: Add macro for OFTABLE_CHK_OUT_PORT_SEC table number. [ovs-dev,22/26] tests: Add macro for OFTABLE_ECMP_NH_MAC table number. [ovs-dev,23/26] tests: Add macro for OFTABLE_ECMP_NH table number. [ovs-dev,24/26] tests: Add macro for OFTABLE_CHK_LB_AFFINITY table number. [ovs-dev,25/26] tests: Add macro for OFTABLE_MAC_CACHE_USE table number. [ovs-dev,26/26] checkpatch: Add rule to check for hardcoded table numbers

Context	Check	Description
ovsrobot/apply-robot	success	apply and check: success
ovsrobot/github-robot-_Build_and_Test	success	github build: passed
ovsrobot/github-robot-_ovn-kubernetes	success	github build: passed

diff --git a/tests/ovn-macros.at b/tests/ovn-macros.at index 7efaa633a..3781c4ff8 100644 --- a/tests/ovn-macros.at +++ b/tests/ovn-macros.at @@ -1002,3 +1002,4 @@ m4_define([OFTABLE_CHK_LB_HAIRPIN_REPLY], [69]) m4_define([OFTABLE_CT_SNAT_HAIRPIN], [70]) m4_define([OFTABLE_GET_FDB], [71]) m4_define([OFTABLE_LOOKUP_FDB], [72]) +m4_define([OFTABLE_CHK_IN_PORT_SEC], [73]) diff --git a/tests/ovn.at b/tests/ovn.at index 35052bb35..3b5923c9a 100644 --- a/tests/ovn.at +++ b/tests/ovn.at @@ -34271,12 +34271,14 @@ sw0_dp_key=$(printf "%x" $(fetch_column Datapath_Binding tunnel_key external_ids sw0p1_key=$(printf "%x" $(fetch_column Port_Binding tunnel_key logical_port=sw0p1)) sw0p2_key=$(printf "%x" $(fetch_column Port_Binding tunnel_key logical_port=sw0p2)) -# There should be no flows in table 73, 74 and 75 in hv1 and hv2 -> hv1_t73_flows.expected +in_port_sec=OFTABLE_CHK_IN_PORT_SEC + +# There should be no flows in table OFTABLE_CHK_IN_PORT_SEC, 74 and 75 in hv1 and hv2 +> hv1_t${in_port_sec}_flows.expected > hv1_t74_flows.expected > hv1_t75_flows.expected -> hv2_t73_flows.expected +> hv2_t${in_port_sec}_flows.expected > hv2_t74_flows.expected > hv2_t75_flows.expected @@ -34288,22 +34290,22 @@ check_port_sec_offlows() { AT_CHECK([diff -u ${hv}_t${t}_flows.actual ${hv}_t${t}_flows.expected]) } -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv1 74 check_port_sec_offlows hv1 75 -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv2 74 check_port_sec_offlows hv2 75 # Set port security for sw0p1 check ovn-nbctl --wait=hv lsp-set-port-security sw0p1 "00:00:00:00:00:03" -echo " table=73, priority=80,reg14=0x$sw0p1_key,metadata=0x$sw0_dp_key actions=load:0x1->NXM_NX_REG10[[12]] - table=73, priority=90,reg14=0x$sw0p1_key,metadata=0x$sw0_dp_key,dl_src=00:00:00:00:00:03 actions=resubmit(,74) - table=73, priority=95,arp,reg14=0x$sw0p1_key,metadata=0x$sw0_dp_key actions=resubmit(,74)" > hv1_t73_flows.expected +echo " table=OFTABLE_CHK_IN_PORT_SEC, priority=80,reg14=0x$sw0p1_key,metadata=0x$sw0_dp_key actions=load:0x1->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,reg14=0x$sw0p1_key,metadata=0x$sw0_dp_key,dl_src=00:00:00:00:00:03 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=95,arp,reg14=0x$sw0p1_key,metadata=0x$sw0_dp_key actions=resubmit(,74)" > hv1_t${in_port_sec}_flows.expected -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC echo " table=74, priority=80,arp,reg14=0x$sw0p1_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] table=74, priority=80,icmp6,reg14=0x$sw0p1_key,metadata=0x1,nw_ttl=255,icmp_type=135 actions=load:0->NXM_NX_REG10[[12]] @@ -34321,25 +34323,25 @@ echo " table=75, priority=80,reg15=0x$sw0p1_key,metadata=0x1 actions=load:0x1->N check_port_sec_offlows hv1 75 -> hv2_t73_flows.expected +> hv2_t${in_port_sec}_flows.expected > hv2_t74_flows.expected > hv2_t75_flows.expected -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv2 74 check_port_sec_offlows hv2 75 # Add IPv4 addresses to sw0p1 check ovn-nbctl --wait=hv lsp-set-port-security sw0p1 "00:00:00:00:00:03 10.0.0.3" "00:00:00:00:00:13 10.0.0.13" -echo " table=73, priority=80,reg14=0x$sw0p1_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] - table=73, priority=90,ip,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:03,nw_src=10.0.0.3 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,ip,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:13,nw_src=10.0.0.13 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,udp,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:03,nw_src=0.0.0.0,nw_dst=255.255.255.255,tp_src=68,tp_dst=67 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,udp,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:13,nw_src=0.0.0.0,nw_dst=255.255.255.255,tp_src=68,tp_dst=67 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=95,arp,reg14=0x$sw0p1_key,metadata=0x1 actions=resubmit(,74)" > hv1_t73_flows.expected +echo " table=OFTABLE_CHK_IN_PORT_SEC, priority=80,reg14=0x$sw0p1_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ip,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:03,nw_src=10.0.0.3 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ip,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:13,nw_src=10.0.0.13 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,udp,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:03,nw_src=0.0.0.0,nw_dst=255.255.255.255,tp_src=68,tp_dst=67 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,udp,reg14=0x$sw0p1_key,metadata=0x1,dl_src=00:00:00:00:00:13,nw_src=0.0.0.0,nw_dst=255.255.255.255,tp_src=68,tp_dst=67 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=95,arp,reg14=0x$sw0p1_key,metadata=0x1 actions=resubmit(,74)" > hv1_t${in_port_sec}_flows.expected -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC echo " table=74, priority=80,arp,reg14=0x$sw0p1_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] table=74, priority=80,icmp6,reg14=0x$sw0p1_key,metadata=0x1,nw_ttl=255,icmp_type=135 actions=load:0->NXM_NX_REG10[[12]] @@ -34371,7 +34373,7 @@ echo " table=75, priority=80,reg15=0x$sw0p1_key,metadata=0x1 actions=load:0x1->N check_port_sec_offlows hv1 75 -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv2 74 check_port_sec_offlows hv2 75 @@ -34379,11 +34381,11 @@ check_port_sec_offlows hv2 75 check ovn-nbctl --wait=hv lsp-set-port-security sw0p2 "00:00:00:00:00:04 10.0.0.4 20.0.0.4/24 30.0.0.0/16 1000::4 2000::/64" "00:00:00:00:00:13 aef0::4" # There should be no changes in hv1 and hv2 as sw0p2 is not claimed. -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv1 74 check_port_sec_offlows hv1 75 -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv2 74 check_port_sec_offlows hv2 75 @@ -34393,30 +34395,30 @@ set Interface hv2-vif0 external-ids:iface-id=sw0p2 ofport-request=1 wait_for_ports_up # There should be no changes in hv1 -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv1 74 check_port_sec_offlows hv1 75 #hv2 ovn-controller should program flows. -echo " table=73, priority=80,reg14=0x$sw0p2_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] - table=73, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=131,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=135,icmp_code=0 actions=resubmit(,74) - table=73, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=143,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=131,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=135,icmp_code=0 actions=resubmit(,74) - table=73, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=143,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,ip,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=10.0.0.4 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,ip,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=20.0.0.4 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,ip,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=30.0.0.0/16 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=1000::4 actions=resubmit(,74) - table=73, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=2000::/64 actions=resubmit(,74) - table=73, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=fe80::200:ff:fe00:4 actions=resubmit(,74) - table=73, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=aef0::4 actions=resubmit(,74) - table=73, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=fe80::200:ff:fe00:13 actions=resubmit(,74) - table=73, priority=90,udp,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=0.0.0.0,nw_dst=255.255.255.255,tp_src=68,tp_dst=67 actions=load:0->NXM_NX_REG10[[12]] - table=73, priority=95,arp,reg14=0x$sw0p2_key,metadata=0x1 actions=resubmit(,74)" > hv2_t73_flows.expected - -check_port_sec_offlows hv2 73 +echo " table=OFTABLE_CHK_IN_PORT_SEC, priority=80,reg14=0x$sw0p2_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=131,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=135,icmp_code=0 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=143,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=131,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=135,icmp_code=0 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,icmp6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=::,ipv6_dst=ff02::/16,icmp_type=143,icmp_code=0 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ip,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=10.0.0.4 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ip,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=20.0.0.4 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ip,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=30.0.0.0/16 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=1000::4 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=2000::/64 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,ipv6_src=fe80::200:ff:fe00:4 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=aef0::4 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,ipv6,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:13,ipv6_src=fe80::200:ff:fe00:13 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,udp,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04,nw_src=0.0.0.0,nw_dst=255.255.255.255,tp_src=68,tp_dst=67 actions=load:0->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=95,arp,reg14=0x$sw0p2_key,metadata=0x1 actions=resubmit(,74)" > hv2_t${in_port_sec}_flows.expected + +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC echo " table=74, priority=80,arp,reg14=0x$sw0p2_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] table=74, priority=80,icmp6,reg14=0x$sw0p2_key,metadata=0x1,nw_ttl=255,icmp_type=135 actions=load:0->NXM_NX_REG10[[12]] @@ -34465,42 +34467,42 @@ check_port_sec_offlows hv2 75 check ovn-nbctl --wait=hv lsp-set-port-security sw0p2 "" -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv1 74 check_port_sec_offlows hv1 75 -> hv2_t73_flows.expected +> hv2_t${in_port_sec}_flows.expected > hv2_t74_flows.expected > hv2_t75_flows.expected -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv2 74 check_port_sec_offlows hv2 75 check ovn-nbctl --wait=hv lsp-set-port-security sw0p2 "00:00:00:00:00:04" -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv1 74 check_port_sec_offlows hv1 75 -echo " table=73, priority=80,reg14=0x$sw0p2_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] - table=73, priority=90,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04 actions=resubmit(,74) - table=73, priority=95,arp,reg14=0x$sw0p2_key,metadata=0x1 actions=resubmit(,74)" > hv2_t73_flows.expected +echo " table=OFTABLE_CHK_IN_PORT_SEC, priority=80,reg14=0x$sw0p2_key,metadata=0x1 actions=load:0x1->NXM_NX_REG10[[12]] + table=OFTABLE_CHK_IN_PORT_SEC, priority=90,reg14=0x$sw0p2_key,metadata=0x1,dl_src=00:00:00:00:00:04 actions=resubmit(,74) + table=OFTABLE_CHK_IN_PORT_SEC, priority=95,arp,reg14=0x$sw0p2_key,metadata=0x1 actions=resubmit(,74)" > hv2_t${in_port_sec}_flows.expected -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC # Delete sw0p2 check ovn-nbctl --wait=hv lsp-del sw0p2 -> hv2_t73_flows.expected +> hv2_t${in_port_sec}_flows.expected > hv2_t74_flows.expected > hv2_t75_flows.expected -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv1 74 check_port_sec_offlows hv1 75 -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv2 74 check_port_sec_offlows hv2 75 @@ -34509,15 +34511,15 @@ as hv1 ovs-vsctl del-port hv1-vif0 wait_column '' Port_Binding chassis logical_port=sw0p1 -> hv1_t73_flows.expected +> hv1_t${in_port_sec}_flows.expected > hv1_t74_flows.expected > hv1_t75_flows.expected -check_port_sec_offlows hv1 73 +check_port_sec_offlows hv1 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv1 74 check_port_sec_offlows hv1 75 -check_port_sec_offlows hv2 73 +check_port_sec_offlows hv2 OFTABLE_CHK_IN_PORT_SEC check_port_sec_offlows hv2 74 check_port_sec_offlows hv2 75

[ovs-dev,19/26] tests: Add macro for OFTABLE_CHK_IN_PORT_SEC table number.

Checks

Commit Message

Patch