| Message ID | 20230705170813.1199533-1-dceara@redhat.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | [ovs-dev] ci: Remove '--recheck' in CI. | expand |
| Context | Check | Description |
|---|---|---|
| ovsrobot/apply-robot | warning | apply and check: warning |
| ovsrobot/github-robot-_Build_and_Test | fail | github build: failed |
| ovsrobot/github-robot-_ovn-kubernetes | fail | github build: failed |
Bleep bloop. Greetings Dumitru Ceara, I am a robot and I have tried out your patch.
Thanks for your contribution.
I encountered some error that I wasn't expecting. See the details below.
checkpatch:
WARNING: Line is 85 characters long (recommended limit is 79)
#149 FILE: .github/workflows/test.yml:108:
- { compiler: gcc, testsuite: test, test_range: "1001-", unstable: unstable }
WARNING: Line is 111 characters long (recommended limit is 79)
#155 FILE: .github/workflows/test.yml:113:
- { compiler: clang, testsuite: test, sanitizers: sanitizers, test_range: "1201-", unstable: unstable }
WARNING: Line is 103 characters long (recommended limit is 79)
#159 FILE: .github/workflows/test.yml:116:
- { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: "1001-", unstable: unstable }
WARNING: Line is 108 characters long (recommended limit is 79)
#163 FILE: .github/workflows/test.yml:119:
- { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, test_range: "201-", unstable: unstable }
WARNING: Line is 101 characters long (recommended limit is 79)
#167 FILE: .github/workflows/test.yml:122:
- { compiler: gcc, testsuite: system-test-userspace, test_range: "201-", unstable: unstable }
WARNING: Line is 91 characters long (recommended limit is 79)
#171 FILE: .github/workflows/test.yml:125:
- { compiler: gcc, testsuite: system-test, test_range: "201-", unstable: unstable }
WARNING: Line is 117 characters long (recommended limit is 79)
#175 FILE: .github/workflows/test.yml:128:
- { compiler: clang, testsuite: system-test, sanitizers: sanitizers, test_range: "201-", unstable: unstable }
Lines checked: 351, Warnings: 7, Errors: 0
Please check this out. If you feel there has been an error, please email aconole@redhat.com
Thanks,
0-day Robot
On Wed, Jul 5, 2023 at 7:08 PM Dumitru Ceara <dceara@redhat.com> wrote: > If we want to catch new failures faster we have a better chance if CI > doesn't auto-retry (once). > > There are some tests that are still "unstable" and fail every now and > then. In order to reduce the number of false negatives keep the > --recheck for them. To achieve that we use a new macro, TAG_UNSTABLE, > to tag all these tests. The list of "unstable" tests is compiled based > on the following discussion: > https://mail.openvswitch.org/pipermail/ovs-dev/2023-June/405465.html > > In order to avoid new GitHub actions jobs, we re-purpose the last job of > each target type to also run the unstable tests. These jobs were > already running less tests than others so the additional run time should > not be an issue. > > Signed-off-by: Dumitru Ceara <dceara@redhat.com> > Hi, I have one question below. > --- > Changes in v1 (since RFC): > - kept recheck for unstable tests > - introduced TAG_UNSTABLE > - changed test.yml to run unstable tests in the last batch of every > test target type. > --- > .ci/ci.sh | 2 +- > .ci/linux-build.sh | 54 +++++++++++++++++++++++++++----------- > .github/workflows/test.yml | 15 ++++++----- > tests/ovn-ic.at | 1 + > tests/ovn-ipsec.at | 1 + > tests/ovn-macros.at | 5 ++++ > tests/ovn-northd.at | 1 + > tests/ovn-performance.at | 1 + > tests/ovn.at | 13 +++++++++ > 9 files changed, 70 insertions(+), 23 deletions(-) > > diff --git a/.ci/ci.sh b/.ci/ci.sh > index 10f11939c5..a500aba764 100755 > --- a/.ci/ci.sh > +++ b/.ci/ci.sh > @@ -101,7 +101,7 @@ function run_tests() { > && \ > ARCH=$ARCH CC=$CC LIBS=$LIBS OPTS=$OPTS TESTSUITE=$TESTSUITE \ > TEST_RANGE=$TEST_RANGE SANITIZERS=$SANITIZERS DPDK=$DPDK \ > - ./.ci/linux-build.sh > + UNSTABLE=$UNSTABLE ./.ci/linux-build.sh > " > } > > diff --git a/.ci/linux-build.sh b/.ci/linux-build.sh > index 5a79a52daf..58e41a7b68 100755 > --- a/.ci/linux-build.sh > +++ b/.ci/linux-build.sh > @@ -9,6 +9,7 @@ COMMON_CFLAGS="" > OVN_CFLAGS="" > OPTS="$OPTS --enable-Werror" > JOBS=${JOBS:-"-j4"} > +RECHECK=${RECHECK:-"no"} > > function install_dpdk() > { > @@ -99,6 +100,17 @@ function configure_clang() > COMMON_CFLAGS="${COMMON_CFLAGS} > -Wno-error=unused-command-line-argument" > } > > +function run_tests() > +{ > + if ! make distcheck CFLAGS="${COMMON_CFLAGS} ${OVN_CFLAGS}" $JOBS \ > + TESTSUITEFLAGS="$JOBS $TEST_RANGE" RECHECK=$RECHECK > + then > + # testsuite.log is necessary for debugging. > + cat */_build/sub/tests/testsuite.log > + exit 1 > This essentially mean that if we fail in the stable part we won't run the unstable, which might be ok. But IMO it would be better to run both and fail depending on results from both WDYT? The same applies for system tests. > + fi > +} > + > function execute_tests() > { > # 'distcheck' will reconfigure with required options. > @@ -106,27 +118,39 @@ function execute_tests() > configure_ovn > > export DISTCHECK_CONFIGURE_FLAGS="$OPTS" > - if ! make distcheck CFLAGS="${COMMON_CFLAGS} ${OVN_CFLAGS}" $JOBS \ > - TESTSUITEFLAGS="$JOBS $TEST_RANGE" RECHECK=yes > - then > - # testsuite.log is necessary for debugging. > - cat */_build/sub/tests/testsuite.log > + > + SKIP_UNSTABLE=yes run_tests > + > + if [ "$UNSTABLE" ]; then > + SKIP_UNSTABLE=no TEST_RANGE="-k unstable" RECHECK=yes \ > + run_tests > + fi > +} > + > +function run_system_tests() > +{ > + type=$1 > + log_file=$2 > + > + if ! sudo make $JOBS $type TESTSUITEFLAGS="$TEST_RANGE" \ > + RECHECK=$RECHECK; then > + # $log_file is necessary for debugging. > + cat tests/$log_file > exit 1 > fi > } > > function execute_system_tests() > { > - type=$1 > - log_file=$2 > - > - configure_ovn $OPTS > - make $JOBS || { cat config.log; exit 1; } > - if ! sudo make $JOBS $type TESTSUITEFLAGS="$TEST_RANGE" > RECHECK=yes; then > - # $log_file is necessary for debugging. > - cat tests/$log_file > - exit 1 > - fi > + configure_ovn $OPTS > + make $JOBS || { cat config.log; exit 1; } > + > + SKIP_UNSTABLE=yes run_system_tests $@ > + > + if [ "$UNSTABLE" ]; then > + SKIP_UNSTABLE=no TEST_RANGE="-k unstable" RECHECK=yes \ > + run_system_tests $@ > + fi > } > > configure_$CC > diff --git a/.github/workflows/test.yml b/.github/workflows/test.yml > index fe2a14c401..7d40251003 100644 > --- a/.github/workflows/test.yml > +++ b/.github/workflows/test.yml > @@ -92,6 +92,7 @@ jobs: > TESTSUITE: ${{ matrix.cfg.testsuite }} > TEST_RANGE: ${{ matrix.cfg.test_range }} > SANITIZERS: ${{ matrix.cfg.sanitizers }} > + UNSTABLE: ${{ matrix.cfg.unstable }} > > name: linux ${{ join(matrix.cfg.*, ' ') }} > runs-on: ubuntu-latest > @@ -104,27 +105,27 @@ jobs: > - { compiler: clang, opts: --disable-ssl } > - { compiler: gcc, testsuite: test, test_range: "-500" } > - { compiler: gcc, testsuite: test, test_range: "501-1000" } > - - { compiler: gcc, testsuite: test, test_range: "1001-" } > + - { compiler: gcc, testsuite: test, test_range: "1001-", > unstable: unstable } > - { compiler: clang, testsuite: test, sanitizers: sanitizers, > test_range: "-300" } > - { compiler: clang, testsuite: test, sanitizers: sanitizers, > test_range: "301-600" } > - { compiler: clang, testsuite: test, sanitizers: sanitizers, > test_range: "601-900" } > - { compiler: clang, testsuite: test, sanitizers: sanitizers, > test_range: "901-1200" } > - - { compiler: clang, testsuite: test, sanitizers: sanitizers, > test_range: "1201-" } > + - { compiler: clang, testsuite: test, sanitizers: sanitizers, > test_range: "1201-", unstable: unstable } > - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: > "-500" } > - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: > "501-1000" } > - - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: > "1001-" } > + - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: > "1001-", unstable: unstable } > - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, > test_range: "-100" } > - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, > test_range: "101-200" } > - - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, > test_range: "201-" } > + - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, > test_range: "201-", unstable: unstable } > - { compiler: gcc, testsuite: system-test-userspace, test_range: > "-100" } > - { compiler: gcc, testsuite: system-test-userspace, test_range: > "101-200" } > - - { compiler: gcc, testsuite: system-test-userspace, test_range: > "201-" } > + - { compiler: gcc, testsuite: system-test-userspace, test_range: > "201-", unstable: unstable } > - { compiler: gcc, testsuite: system-test, test_range: "-100" } > - { compiler: gcc, testsuite: system-test, test_range: "101-200" } > - - { compiler: gcc, testsuite: system-test, test_range: "201-" } > + - { compiler: gcc, testsuite: system-test, test_range: "201-", > unstable: unstable } > - { compiler: clang, testsuite: system-test, sanitizers: > sanitizers, test_range: "-100" } > - { compiler: clang, testsuite: system-test, sanitizers: > sanitizers, test_range: "101-200" } > - - { compiler: clang, testsuite: system-test, sanitizers: > sanitizers, test_range: "201-" } > + - { compiler: clang, testsuite: system-test, sanitizers: > sanitizers, test_range: "201-", unstable: unstable } > - { arch: x86, compiler: gcc, opts: --disable-ssl } > > steps: > diff --git a/tests/ovn-ic.at b/tests/ovn-ic.at > index ceee450925..285662e3b8 100644 > --- a/tests/ovn-ic.at > +++ b/tests/ovn-ic.at > @@ -256,6 +256,7 @@ AT_CLEANUP > > OVN_FOR_EACH_NORTHD([ > AT_SETUP([ovn-ic -- gateway sync]) > +TAG_UNSTABLE > > ovn_init_ic_db > net_add n1 > diff --git a/tests/ovn-ipsec.at b/tests/ovn-ipsec.at > index 10ef978780..e621547c59 100644 > --- a/tests/ovn-ipsec.at > +++ b/tests/ovn-ipsec.at > @@ -1,6 +1,7 @@ > AT_BANNER([OVN - IPsec]) > > AT_SETUP([ipsec -- basic configuration]) > +TAG_UNSTABLE > ovn_start > > # Configure the Northbound database > diff --git a/tests/ovn-macros.at b/tests/ovn-macros.at > index 6f2d085ae4..6420721740 100644 > --- a/tests/ovn-macros.at > +++ b/tests/ovn-macros.at > @@ -871,3 +871,8 @@ m4_define([RUN_OVN_NBCTL], [ > check ovn-nbctl ${command} > unset command > ]) > + > +m4_define([TAG_UNSTABLE], [ > + AT_KEYWORDS([unstable]) > + AT_SKIP_IF([test X"$SKIP_UNSTABLE" = Xyes]) > +]) > diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at > index 5d871b2873..aa928db771 100644 > --- a/tests/ovn-northd.at > +++ b/tests/ovn-northd.at > @@ -4506,6 +4506,7 @@ AT_CLEANUP > > OVN_FOR_EACH_NORTHD_NO_HV([ > AT_SETUP([northd ssl file change]) > +TAG_UNSTABLE > AT_SKIP_IF([test "$HAVE_OPENSSL" = no]) > PKIDIR="$(cd $abs_top_builddir/tests && pwd)" > AT_SKIP_IF([expr "$PKIDIR" : ".*[[ '\" > diff --git a/tests/ovn-performance.at b/tests/ovn-performance.at > index ba329f0f64..9de0a4e770 100644 > --- a/tests/ovn-performance.at > +++ b/tests/ovn-performance.at > @@ -225,6 +225,7 @@ m4_define([OVN_CONTROLLER_EXPECT_HIT_COND],[ > ]) > > AT_SETUP([ovn-controller incremental processing]) > +TAG_UNSTABLE > # Check which operations the trigger full logical flow processing. > # > # Create and destroy logical routers, switches, ports, address sets and > ACLs > diff --git a/tests/ovn.at b/tests/ovn.at > index cd6d4b9ff4..cd8f481bbc 100644 > --- a/tests/ovn.at > +++ b/tests/ovn.at > @@ -7853,6 +7853,7 @@ AT_CLEANUP > OVN_FOR_EACH_NORTHD([ > AT_SETUP([policy-based routing: 1 HVs, 2 LSs, 1 lport/LS, 1 LR]) > AT_KEYWORDS([policy-based-routing]) > +TAG_UNSTABLE > ovn_start > > # Logical network: > @@ -8025,6 +8026,7 @@ AT_CLEANUP > OVN_FOR_EACH_NORTHD([ > AT_SETUP([policy-based routing IPv6: 1 HVs, 3 LSs, 1 lport/LS, 1 LR]) > AT_KEYWORDS([policy-based-routing]) > +TAG_UNSTABLE > ovn_start > > # Logical network: > @@ -14405,6 +14407,7 @@ AT_CLEANUP > OVN_FOR_EACH_NORTHD([ > AT_SETUP([options:multiple requested-chassis for logical port]) > AT_KEYWORDS([multi-chassis]) > +TAG_UNSTABLE > ovn_start > > net_add n1 > @@ -14507,6 +14510,7 @@ AT_CLEANUP > OVN_FOR_EACH_NORTHD([ > AT_SETUP([options:multiple requested-chassis for logical port: change > chassis role]) > AT_KEYWORDS([multi-chassis]) > +TAG_UNSTABLE > ovn_start > > net_add n1 > @@ -14557,6 +14561,7 @@ AT_CLEANUP > OVN_FOR_EACH_NORTHD([ > AT_SETUP([options:multiple requested-chassis for logical port: unclaimed > behavior]) > AT_KEYWORDS([multi-chassis]) > +TAG_UNSTABLE > ovn_start > > net_add n1 > @@ -16130,6 +16135,7 @@ AT_CLEANUP > > OVN_FOR_EACH_NORTHD([ > AT_SETUP([tug-of-war between two chassis for the same port]) > +TAG_UNSTABLE > ovn_start > > ovn-nbctl ls-add ls0 > @@ -29503,6 +29509,7 @@ AT_CLEANUP > > OVN_FOR_EACH_NORTHD([ > AT_SETUP([nb_cfg timestamp]) > +TAG_UNSTABLE > ovn_start > > check ovn-nbctl ls-add s2 > @@ -29604,6 +29611,7 @@ AT_CLEANUP > OVN_FOR_EACH_NORTHD([ > AT_SETUP([ARP replies for SNAT external ips]) > AT_KEYWORDS([slowtest]) > +TAG_UNSTABLE > ovn_start > > net_add n1 > @@ -29970,6 +29978,7 @@ AT_CLEANUP > # It is to cover a corner case when flows are re-processed in the I-P > # iteration, combined with the scenario of conflicting ACLs. > AT_SETUP([conflict ACLs with address set]) > +TAG_UNSTABLE > ovn_start > > ovn-nbctl ls-add ls1 > @@ -30165,6 +30174,7 @@ AT_CLEANUP > # > OVN_FOR_EACH_NORTHD([ > AT_SETUP([multi-vtep SB Chassis encap updates]) > +TAG_UNSTABLE > ovn_start > > net_add n1 > @@ -32354,6 +32364,7 @@ AT_CLEANUP > # - 2 for expanding the port group @pg1 to the 2 locally bound lports. > OVN_FOR_EACH_NORTHD([ > AT_SETUP([ACL with Port Group conjunction flow efficiency]) > +TAG_UNSTABLE > ovn_start > > net_add n1 > @@ -34606,6 +34617,7 @@ AT_CLEANUP > > OVN_FOR_EACH_NORTHD([ > AT_SETUP([recomputes]) > +TAG_UNSTABLE > ovn_start > > net_add n1 > @@ -35040,6 +35052,7 @@ MULTIPLE_OVS_INT([]) > > OVN_FOR_EACH_NORTHD([ > AT_SETUP([Check default openflow flows]) > +TAG_UNSTABLE > ovn_start > > # Check that every table has a default (i.e: priority=0) flow. > -- > 2.31.1 > > Thanks, Ales
On 7/7/23 14:27, Ales Musil wrote: > On Wed, Jul 5, 2023 at 7:08 PM Dumitru Ceara <dceara@redhat.com> wrote: > >> If we want to catch new failures faster we have a better chance if CI >> doesn't auto-retry (once). >> >> There are some tests that are still "unstable" and fail every now and >> then. In order to reduce the number of false negatives keep the >> --recheck for them. To achieve that we use a new macro, TAG_UNSTABLE, >> to tag all these tests. The list of "unstable" tests is compiled based >> on the following discussion: >> https://mail.openvswitch.org/pipermail/ovs-dev/2023-June/405465.html >> >> In order to avoid new GitHub actions jobs, we re-purpose the last job of >> each target type to also run the unstable tests. These jobs were >> already running less tests than others so the additional run time should >> not be an issue. >> >> Signed-off-by: Dumitru Ceara <dceara@redhat.com> >> > > Hi, > > I have one question below. > Hi Ales, Thanks for the review! > >> --- >> Changes in v1 (since RFC): >> - kept recheck for unstable tests >> - introduced TAG_UNSTABLE >> - changed test.yml to run unstable tests in the last batch of every >> test target type. >> --- >> .ci/ci.sh | 2 +- >> .ci/linux-build.sh | 54 +++++++++++++++++++++++++++----------- >> .github/workflows/test.yml | 15 ++++++----- >> tests/ovn-ic.at | 1 + >> tests/ovn-ipsec.at | 1 + >> tests/ovn-macros.at | 5 ++++ >> tests/ovn-northd.at | 1 + >> tests/ovn-performance.at | 1 + >> tests/ovn.at | 13 +++++++++ >> 9 files changed, 70 insertions(+), 23 deletions(-) >> >> diff --git a/.ci/ci.sh b/.ci/ci.sh >> index 10f11939c5..a500aba764 100755 >> --- a/.ci/ci.sh >> +++ b/.ci/ci.sh >> @@ -101,7 +101,7 @@ function run_tests() { >> && \ >> ARCH=$ARCH CC=$CC LIBS=$LIBS OPTS=$OPTS TESTSUITE=$TESTSUITE \ >> TEST_RANGE=$TEST_RANGE SANITIZERS=$SANITIZERS DPDK=$DPDK \ >> - ./.ci/linux-build.sh >> + UNSTABLE=$UNSTABLE ./.ci/linux-build.sh >> " >> } >> >> diff --git a/.ci/linux-build.sh b/.ci/linux-build.sh >> index 5a79a52daf..58e41a7b68 100755 >> --- a/.ci/linux-build.sh >> +++ b/.ci/linux-build.sh >> @@ -9,6 +9,7 @@ COMMON_CFLAGS="" >> OVN_CFLAGS="" >> OPTS="$OPTS --enable-Werror" >> JOBS=${JOBS:-"-j4"} >> +RECHECK=${RECHECK:-"no"} >> >> function install_dpdk() >> { >> @@ -99,6 +100,17 @@ function configure_clang() >> COMMON_CFLAGS="${COMMON_CFLAGS} >> -Wno-error=unused-command-line-argument" >> } >> >> +function run_tests() >> +{ >> + if ! make distcheck CFLAGS="${COMMON_CFLAGS} ${OVN_CFLAGS}" $JOBS \ >> + TESTSUITEFLAGS="$JOBS $TEST_RANGE" RECHECK=$RECHECK >> + then >> + # testsuite.log is necessary for debugging. >> + cat */_build/sub/tests/testsuite.log >> + exit 1 >> > > This essentially mean that if we fail in the stable part we won't run the > unstable, > which might be ok. But IMO it would be better to run both and fail > depending on results > from both WDYT? The same applies for system tests. > Makes sense, I did that and posted v2 here: https://patchwork.ozlabs.org/project/ovn/patch/20230710152543.95100-1-dceara@redhat.com/ Regards, Dumitru
diff --git a/.ci/ci.sh b/.ci/ci.sh index 10f11939c5..a500aba764 100755 --- a/.ci/ci.sh +++ b/.ci/ci.sh @@ -101,7 +101,7 @@ function run_tests() { && \ ARCH=$ARCH CC=$CC LIBS=$LIBS OPTS=$OPTS TESTSUITE=$TESTSUITE \ TEST_RANGE=$TEST_RANGE SANITIZERS=$SANITIZERS DPDK=$DPDK \ - ./.ci/linux-build.sh + UNSTABLE=$UNSTABLE ./.ci/linux-build.sh " } diff --git a/.ci/linux-build.sh b/.ci/linux-build.sh index 5a79a52daf..58e41a7b68 100755 --- a/.ci/linux-build.sh +++ b/.ci/linux-build.sh @@ -9,6 +9,7 @@ COMMON_CFLAGS="" OVN_CFLAGS="" OPTS="$OPTS --enable-Werror" JOBS=${JOBS:-"-j4"} +RECHECK=${RECHECK:-"no"} function install_dpdk() { @@ -99,6 +100,17 @@ function configure_clang() COMMON_CFLAGS="${COMMON_CFLAGS} -Wno-error=unused-command-line-argument" } +function run_tests() +{ + if ! make distcheck CFLAGS="${COMMON_CFLAGS} ${OVN_CFLAGS}" $JOBS \ + TESTSUITEFLAGS="$JOBS $TEST_RANGE" RECHECK=$RECHECK + then + # testsuite.log is necessary for debugging. + cat */_build/sub/tests/testsuite.log + exit 1 + fi +} + function execute_tests() { # 'distcheck' will reconfigure with required options. @@ -106,27 +118,39 @@ function execute_tests() configure_ovn export DISTCHECK_CONFIGURE_FLAGS="$OPTS" - if ! make distcheck CFLAGS="${COMMON_CFLAGS} ${OVN_CFLAGS}" $JOBS \ - TESTSUITEFLAGS="$JOBS $TEST_RANGE" RECHECK=yes - then - # testsuite.log is necessary for debugging. - cat */_build/sub/tests/testsuite.log + + SKIP_UNSTABLE=yes run_tests + + if [ "$UNSTABLE" ]; then + SKIP_UNSTABLE=no TEST_RANGE="-k unstable" RECHECK=yes \ + run_tests + fi +} + +function run_system_tests() +{ + type=$1 + log_file=$2 + + if ! sudo make $JOBS $type TESTSUITEFLAGS="$TEST_RANGE" \ + RECHECK=$RECHECK; then + # $log_file is necessary for debugging. + cat tests/$log_file exit 1 fi } function execute_system_tests() { - type=$1 - log_file=$2 - - configure_ovn $OPTS - make $JOBS || { cat config.log; exit 1; } - if ! sudo make $JOBS $type TESTSUITEFLAGS="$TEST_RANGE" RECHECK=yes; then - # $log_file is necessary for debugging. - cat tests/$log_file - exit 1 - fi + configure_ovn $OPTS + make $JOBS || { cat config.log; exit 1; } + + SKIP_UNSTABLE=yes run_system_tests $@ + + if [ "$UNSTABLE" ]; then + SKIP_UNSTABLE=no TEST_RANGE="-k unstable" RECHECK=yes \ + run_system_tests $@ + fi } configure_$CC diff --git a/.github/workflows/test.yml b/.github/workflows/test.yml index fe2a14c401..7d40251003 100644 --- a/.github/workflows/test.yml +++ b/.github/workflows/test.yml @@ -92,6 +92,7 @@ jobs: TESTSUITE: ${{ matrix.cfg.testsuite }} TEST_RANGE: ${{ matrix.cfg.test_range }} SANITIZERS: ${{ matrix.cfg.sanitizers }} + UNSTABLE: ${{ matrix.cfg.unstable }} name: linux ${{ join(matrix.cfg.*, ' ') }} runs-on: ubuntu-latest @@ -104,27 +105,27 @@ jobs: - { compiler: clang, opts: --disable-ssl } - { compiler: gcc, testsuite: test, test_range: "-500" } - { compiler: gcc, testsuite: test, test_range: "501-1000" } - - { compiler: gcc, testsuite: test, test_range: "1001-" } + - { compiler: gcc, testsuite: test, test_range: "1001-", unstable: unstable } - { compiler: clang, testsuite: test, sanitizers: sanitizers, test_range: "-300" } - { compiler: clang, testsuite: test, sanitizers: sanitizers, test_range: "301-600" } - { compiler: clang, testsuite: test, sanitizers: sanitizers, test_range: "601-900" } - { compiler: clang, testsuite: test, sanitizers: sanitizers, test_range: "901-1200" } - - { compiler: clang, testsuite: test, sanitizers: sanitizers, test_range: "1201-" } + - { compiler: clang, testsuite: test, sanitizers: sanitizers, test_range: "1201-", unstable: unstable } - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: "-500" } - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: "501-1000" } - - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: "1001-" } + - { compiler: gcc, testsuite: test, libs: -ljemalloc, test_range: "1001-", unstable: unstable } - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, test_range: "-100" } - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, test_range: "101-200" } - - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, test_range: "201-" } + - { compiler: gcc, testsuite: system-test-dpdk, dpdk: dpdk, test_range: "201-", unstable: unstable } - { compiler: gcc, testsuite: system-test-userspace, test_range: "-100" } - { compiler: gcc, testsuite: system-test-userspace, test_range: "101-200" } - - { compiler: gcc, testsuite: system-test-userspace, test_range: "201-" } + - { compiler: gcc, testsuite: system-test-userspace, test_range: "201-", unstable: unstable } - { compiler: gcc, testsuite: system-test, test_range: "-100" } - { compiler: gcc, testsuite: system-test, test_range: "101-200" } - - { compiler: gcc, testsuite: system-test, test_range: "201-" } + - { compiler: gcc, testsuite: system-test, test_range: "201-", unstable: unstable } - { compiler: clang, testsuite: system-test, sanitizers: sanitizers, test_range: "-100" } - { compiler: clang, testsuite: system-test, sanitizers: sanitizers, test_range: "101-200" } - - { compiler: clang, testsuite: system-test, sanitizers: sanitizers, test_range: "201-" } + - { compiler: clang, testsuite: system-test, sanitizers: sanitizers, test_range: "201-", unstable: unstable } - { arch: x86, compiler: gcc, opts: --disable-ssl } steps: diff --git a/tests/ovn-ic.at b/tests/ovn-ic.at index ceee450925..285662e3b8 100644 --- a/tests/ovn-ic.at +++ b/tests/ovn-ic.at @@ -256,6 +256,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([ovn-ic -- gateway sync]) +TAG_UNSTABLE ovn_init_ic_db net_add n1 diff --git a/tests/ovn-ipsec.at b/tests/ovn-ipsec.at index 10ef978780..e621547c59 100644 --- a/tests/ovn-ipsec.at +++ b/tests/ovn-ipsec.at @@ -1,6 +1,7 @@ AT_BANNER([OVN - IPsec]) AT_SETUP([ipsec -- basic configuration]) +TAG_UNSTABLE ovn_start # Configure the Northbound database diff --git a/tests/ovn-macros.at b/tests/ovn-macros.at index 6f2d085ae4..6420721740 100644 --- a/tests/ovn-macros.at +++ b/tests/ovn-macros.at @@ -871,3 +871,8 @@ m4_define([RUN_OVN_NBCTL], [ check ovn-nbctl ${command} unset command ]) + +m4_define([TAG_UNSTABLE], [ + AT_KEYWORDS([unstable]) + AT_SKIP_IF([test X"$SKIP_UNSTABLE" = Xyes]) +]) diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at index 5d871b2873..aa928db771 100644 --- a/tests/ovn-northd.at +++ b/tests/ovn-northd.at @@ -4506,6 +4506,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD_NO_HV([ AT_SETUP([northd ssl file change]) +TAG_UNSTABLE AT_SKIP_IF([test "$HAVE_OPENSSL" = no]) PKIDIR="$(cd $abs_top_builddir/tests && pwd)" AT_SKIP_IF([expr "$PKIDIR" : ".*[[ '\" diff --git a/tests/ovn-performance.at b/tests/ovn-performance.at index ba329f0f64..9de0a4e770 100644 --- a/tests/ovn-performance.at +++ b/tests/ovn-performance.at @@ -225,6 +225,7 @@ m4_define([OVN_CONTROLLER_EXPECT_HIT_COND],[ ]) AT_SETUP([ovn-controller incremental processing]) +TAG_UNSTABLE # Check which operations the trigger full logical flow processing. # # Create and destroy logical routers, switches, ports, address sets and ACLs diff --git a/tests/ovn.at b/tests/ovn.at index cd6d4b9ff4..cd8f481bbc 100644 --- a/tests/ovn.at +++ b/tests/ovn.at @@ -7853,6 +7853,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([policy-based routing: 1 HVs, 2 LSs, 1 lport/LS, 1 LR]) AT_KEYWORDS([policy-based-routing]) +TAG_UNSTABLE ovn_start # Logical network: @@ -8025,6 +8026,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([policy-based routing IPv6: 1 HVs, 3 LSs, 1 lport/LS, 1 LR]) AT_KEYWORDS([policy-based-routing]) +TAG_UNSTABLE ovn_start # Logical network: @@ -14405,6 +14407,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([options:multiple requested-chassis for logical port]) AT_KEYWORDS([multi-chassis]) +TAG_UNSTABLE ovn_start net_add n1 @@ -14507,6 +14510,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([options:multiple requested-chassis for logical port: change chassis role]) AT_KEYWORDS([multi-chassis]) +TAG_UNSTABLE ovn_start net_add n1 @@ -14557,6 +14561,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([options:multiple requested-chassis for logical port: unclaimed behavior]) AT_KEYWORDS([multi-chassis]) +TAG_UNSTABLE ovn_start net_add n1 @@ -16130,6 +16135,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([tug-of-war between two chassis for the same port]) +TAG_UNSTABLE ovn_start ovn-nbctl ls-add ls0 @@ -29503,6 +29509,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([nb_cfg timestamp]) +TAG_UNSTABLE ovn_start check ovn-nbctl ls-add s2 @@ -29604,6 +29611,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([ARP replies for SNAT external ips]) AT_KEYWORDS([slowtest]) +TAG_UNSTABLE ovn_start net_add n1 @@ -29970,6 +29978,7 @@ AT_CLEANUP # It is to cover a corner case when flows are re-processed in the I-P # iteration, combined with the scenario of conflicting ACLs. AT_SETUP([conflict ACLs with address set]) +TAG_UNSTABLE ovn_start ovn-nbctl ls-add ls1 @@ -30165,6 +30174,7 @@ AT_CLEANUP # OVN_FOR_EACH_NORTHD([ AT_SETUP([multi-vtep SB Chassis encap updates]) +TAG_UNSTABLE ovn_start net_add n1 @@ -32354,6 +32364,7 @@ AT_CLEANUP # - 2 for expanding the port group @pg1 to the 2 locally bound lports. OVN_FOR_EACH_NORTHD([ AT_SETUP([ACL with Port Group conjunction flow efficiency]) +TAG_UNSTABLE ovn_start net_add n1 @@ -34606,6 +34617,7 @@ AT_CLEANUP OVN_FOR_EACH_NORTHD([ AT_SETUP([recomputes]) +TAG_UNSTABLE ovn_start net_add n1 @@ -35040,6 +35052,7 @@ MULTIPLE_OVS_INT([]) OVN_FOR_EACH_NORTHD([ AT_SETUP([Check default openflow flows]) +TAG_UNSTABLE ovn_start # Check that every table has a default (i.e: priority=0) flow.
If we want to catch new failures faster we have a better chance if CI doesn't auto-retry (once). There are some tests that are still "unstable" and fail every now and then. In order to reduce the number of false negatives keep the --recheck for them. To achieve that we use a new macro, TAG_UNSTABLE, to tag all these tests. The list of "unstable" tests is compiled based on the following discussion: https://mail.openvswitch.org/pipermail/ovs-dev/2023-June/405465.html In order to avoid new GitHub actions jobs, we re-purpose the last job of each target type to also run the unstable tests. These jobs were already running less tests than others so the additional run time should not be an issue. Signed-off-by: Dumitru Ceara <dceara@redhat.com> --- Changes in v1 (since RFC): - kept recheck for unstable tests - introduced TAG_UNSTABLE - changed test.yml to run unstable tests in the last batch of every test target type. --- .ci/ci.sh | 2 +- .ci/linux-build.sh | 54 +++++++++++++++++++++++++++----------- .github/workflows/test.yml | 15 ++++++----- tests/ovn-ic.at | 1 + tests/ovn-ipsec.at | 1 + tests/ovn-macros.at | 5 ++++ tests/ovn-northd.at | 1 + tests/ovn-performance.at | 1 + tests/ovn.at | 13 +++++++++ 9 files changed, 70 insertions(+), 23 deletions(-)