| Message ID | 20220627093017.2839914-1-xsimonar@redhat.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [ovs-dev,v2] tests: fixed multiple flaky tests (not waiting for patch flows) | expand |
| Context | Check | Description |
|---|---|---|
| ovsrobot/apply-robot | success | apply and check: success |
| ovsrobot/github-robot-_ovn-kubernetes | success | github build: passed |
| ovsrobot/github-robot-_Build_and_Test | fail | github build: failed |
On Mon, Jun 27, 2022 at 4:30 AM Xavier Simonart <xsimonar@redhat.com> wrote: > > The following test cases were sometimes failing, (mainly) for the same reason > i.e. packet lost as being sent before patch ports were installed. > - 2 HVs, 2 LS, switching between multiple localnet ports with same tags > - VLAN transparency, passthru=true, ARP responder disabled > - send gratuitous arp for l3gateway only on selected chassis > - 4 HV, 3 LS, 2 LR, packet test with HA distributed router gateway port > - 1 LR with distributed router gateway port > - send gratuitous arp for NAT rules on distributed router > - send gratuitous ARP for NAT rules on HA distributed router > - localnet connectivity with multiple requested-chassis > - 2 HVs, 2 lports/HV, localnet ports, DVR chassis mac > - 2 HVs, 4 lports/HV, localnet ports > - 2 HVs, 2 LS, routing works for multiple collocated segments attached to different switches > - 2 HVs, 1 LS, no switching between multiple localnet ports with different tags > > Signed-off-by: Xavier Simonart <xsimonar@redhat.com> Thanks for fixing these flakes. I applied to the main branch. Numan > > --- > v2: - handled Mark's comments. > rebased on origin/main > --- > tests/ovn.at | 81 ++++++++++++++++++++++++++++++++++------------------ > 1 file changed, 54 insertions(+), 27 deletions(-) > > diff --git a/tests/ovn.at b/tests/ovn.at > index bfaa41962..b855653ac 100644 > --- a/tests/ovn.at > +++ b/tests/ovn.at > @@ -76,19 +76,22 @@ m4_divert_text([PREPARE_TESTS], > } > > ovn_wait_patch_port_flows () { > - patch_port=$1 > - hv=$2 > - echo "$3: waiting for flows for $patch_port on $hv" > - # Patch port might be created after ports are reported up > - OVS_WAIT_UNTIL([ > - test 1 = $(as $hv ovs-vsctl show | grep "Port $patch_port" | wc -l) > - ]) > - # Wait for a flow outputing to patch port > - OVS_WAIT_UNTIL([ > - hv_patch_ofport=$(as $hv ovs-vsctl --bare --columns ofport find Interface name=$patch_port) > - echo "$patch_port=$hv_patch_ofport" > - test 1 = $(as $hv ovs-ofctl dump-flows br-int | grep -c "output:$hv_patch_ofport") > - ]) > + for localnet in $1; do > + patch_port="patch-br-int-to-$localnet" > + for hv in $2; do > + echo "$3: waiting for flows for $patch_port on $hv" > + # Patch port might be created after ports are reported up > + OVS_WAIT_UNTIL([ > + test 1 = $(as $hv ovs-vsctl show | grep "Port \b$patch_port\b" | wc -l) > + ]) > + # Wait for a flow outputing to patch port > + OVS_WAIT_UNTIL([ > + hv_patch_ofport=$(as $hv ovs-vsctl --bare --columns ofport find Interface name=$patch_port) > + echo "$patch_port=$hv_patch_ofport" > + test 1 -le $(as $hv ovs-ofctl dump-flows br-int | grep -c "output:\b$hv_patch_ofport\b") > + ]) > + done > + done > } > > ovn_wait_remote_output_flows () { > @@ -2952,6 +2955,8 @@ for i in 1 2; do > done > done > wait_for_ports_up > +OVN_WAIT_PATCH_PORT_FLOWS(["ln1" "ln2" "ln3"], ["hv1"] ["hv2"]) > + > ovn-nbctl --wait=sb sync > ovn-sbctl dump-flows > sbflows > AT_CAPTURE_FILE([sbflows]) > @@ -3122,6 +3127,7 @@ done > > wait_for_ports_up > ovn-nbctl --wait=sb sync > +OVN_WAIT_PATCH_PORT_FLOWS(["ln-11" "ln-21"], ["hv-1" "hv-2"]) > > ovn-sbctl dump-flows > sbflows > AT_CAPTURE_FILE([sbflows]) > @@ -3394,6 +3400,7 @@ for i in 1 2; do > ovn-nbctl lsp-set-port-security $lsp_name f0:00:00:00:00:0$i > > OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up $lsp_name` = xup]) > + OVN_WAIT_PATCH_PORT_FLOWS(["ln-$i-20"], ["hv-$i"]) > done > > wait_for_ports_up > @@ -3501,7 +3508,7 @@ done > > wait_for_ports_up > > -# Remote output flows are setup whe pb of remote is received > +# Remote output flows are setup when pb of remote is received > # Hence they can be setup after both ports have been reported up. > OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv-1"],["hv-2"]) > OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv-2"],["hv-1"]) > @@ -3641,7 +3648,7 @@ for i in 1 2; do > > # Patch port might be created after ports are reported up > # Wait for a flow outputing to patch port > - OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln-100"], ["hv-$i"]) > + OVN_WAIT_PATCH_PORT_FLOWS(["ln-100"], ["hv-$i"]) > done > > test_packet() { > @@ -3710,7 +3717,7 @@ for i in 1 2; do > > # Patch port might be created after ports are reported up > # Wait for a flow outputing to patch port > - OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln-100"], ["hv-$i"]) > + OVN_WAIT_PATCH_PORT_FLOWS(["ln-100"], ["hv-$i"]) > done > # create taps on fabric to check vlan encapsulation there > for i in 1 2; do > @@ -3796,7 +3803,7 @@ for i in 1 2; do > > # Patch port might be created after ports are reported up > # Wait for a flow outputing to patch port > - OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln"], ["hv-$i"]) > + OVN_WAIT_PATCH_PORT_FLOWS(["ln"], ["hv-$i"]) > done > > for i in 1 2; do > @@ -4021,6 +4028,7 @@ for tag in 10 20; do > ovn-nbctl lsp-set-port-security $lsp_name f0:00:00:00:0$i:$tag > > OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up $lsp_name` = xup]) > + OVN_WAIT_PATCH_PORT_FLOWS(["ln-$tag"], ["hv-$tag-$i"]) > done > done > wait_for_ports_up > @@ -8856,14 +8864,14 @@ AT_CAPTURE_FILE([sbflows]) > > # Wait until the patch ports are created in hv1 and hv2 to connect br-int to br-eth0 > AT_CHECK([ovn-nbctl set logical_router lr0 options:chassis=hv1]) > -OVS_WAIT_UNTIL([test 1 = `as hv1 ovs-vsctl show | \ > -grep "Port patch-br-int-to-ln_port" | wc -l`]) > +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv1"]) > AT_CHECK([ovn-nbctl set logical_router lr0 options:chassis=hv2]) > -OVS_WAIT_UNTIL([test 1 = `as hv2 ovs-vsctl show | \ > -grep "Port patch-br-int-to-ln_port" | wc -l`]) > +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"]) > > # Temporarily remove lr0 chassis > -AT_CHECK([ovn-nbctl remove logical_router lr0 options chassis]) > +# Wait for hv confirmation to make sure chassis is removed before we reset pcap > +# Otherwise a garp might be sent after pcap have been reset but before chassis is removed > +AT_CHECK([ovn-nbctl --wait=hv remove logical_router lr0 options chassis]) > > reset_pcap_file() { > local hv=$1 > @@ -11324,6 +11332,8 @@ check as ext1 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys > > wait_for_ports_up > check ovn-nbctl --wait=sb sync > +OVN_WAIT_PATCH_PORT_FLOWS(["ln-alice"], ["gw1"] ["gw2"]) > +OVN_WAIT_PATCH_PORT_FLOWS(["ln-outside"], ["ext1"]) > > ovn-sbctl dump-flows > sbflows > AT_CAPTURE_FILE([sbflows]) > @@ -11540,6 +11550,7 @@ check as hv3 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys > dnl Allow some time for ovn-northd and ovn-controller to catch up. > wait_for_ports_up > ovn-nbctl --wait=hv sync > +OVN_WAIT_PATCH_PORT_FLOWS(["ln-outside"], ["hv3"]) > > (echo "---------NB dump-----" > ovn-nbctl show > @@ -11654,7 +11665,7 @@ OVN_CHECK_PACKETS_UNIQ([hv3/vif1-tx.pcap], [hv3-vif1.expected]) > as hv2 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys > > # Wait until the patch ports are created in hv2 to connect br-int to br-phys > -OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln-alice"], ["hv2"]) > +OVN_WAIT_PATCH_PORT_FLOWS(["ln-alice"], ["hv2"]) > > dnl Allow some time for ovn-controller to catch up. > wait_for_ports_up > @@ -11733,6 +11744,7 @@ ovn-nbctl lsp-add foo foo2 \ > # Allow some time for ovn-northd and ovn-controller to catch up. > wait_for_ports_up > check ovn-nbctl --wait=hv sync > +OVN_WAIT_PATCH_PORT_FLOWS(["ln-alice"], ["hv1"]) > > : > hv1-vif2.expected > > @@ -11831,8 +11843,7 @@ OVN_CHECK_PACKETS([hv1/snoopvif-tx.pcap], [packets]) > AT_CHECK([as hv2 ovs-vsctl set Open_vSwitch . external-ids:ovn-bridge-mappings=physnet1:br-phys]) > > # Wait until the patch ports are created in hv2 to connect br-int to br-phys > -OVS_WAIT_UNTIL([test 1 = `as hv2 ovs-vsctl show | \ > -grep "Port patch-br-int-to-ln_port" | wc -l`]) > +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"]) > > # Wait for packets to be received. > OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100]) > @@ -11875,7 +11886,7 @@ ovs-vsctl -- add-port br-int hv3-vif2 -- \ > AT_CHECK([as hv3 ovs-vsctl set Open_vSwitch . external-ids:ovn-bridge-mappings=physnet1:br-phys]) > > # Wait until the patch ports are created in hv3 to connect br-int to br-phys > -OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln_port"], ["hv3"]) > +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv3"]) > > # Re-add nat-addresses option > ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="router" > @@ -13550,6 +13561,7 @@ AT_CHECK([ovn-nbctl lsp-set-options ln_port network_name=physnet1]) > # wait for earlier changes to take effect > wait_for_ports_up > check ovn-nbctl --wait=hv sync > +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"] ["hv3"]) > > reset_pcap_file() { > local iface=$1 > @@ -14762,6 +14774,13 @@ reset_env > # Start port migration hv1 -> hv2: both hypervisors are now bound > check ovn-nbctl lsp-set-options migrator requested-chassis=hv1,hv2 > wait_for_ports_up > +OVN_WAIT_PATCH_PORT_FLOWS(["public"], ["hv1"]) > +OVN_WAIT_PATCH_PORT_FLOWS(["public"], ["hv2"]) > +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv1"],["hv2"]) > +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv2"],["hv1"]) > +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv3"],[hv1"]) > +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv3"],[hv2"]) > + > wait_column "$hv1_uuid" Port_Binding chassis logical_port=migrator > wait_column "$hv1_uuid" Port_Binding requested_chassis logical_port=migrator > wait_column "$hv2_uuid" Port_Binding additional_chassis logical_port=migrator > @@ -20079,6 +20098,11 @@ ovn-nbctl lsp-add ls2 ls2-to-router -- set Logical_Switch_Port ls2-to-router typ > wait_for_ports_up > ovn-nbctl --wait=sb sync > #ovn-sbctl dump-flows > +for i in 1 2; do > + for j in 1 2; do > + OVN_WAIT_PATCH_PORT_FLOWS(["ln$j"], ["hv$i"]) > + done > +done > > ovn-nbctl show > ovn-sbctl show > @@ -22484,6 +22508,8 @@ m4_define([DVR_N_S_ARP_HANDLING], > ovn-nbctl lrp-set-gateway-chassis router-to-underlay hv3 > wait_for_ports_up > ovn-nbctl --wait=sb sync > + OVN_WAIT_PATCH_PORT_FLOWS(["ln1"] ["ln2"], ["hv1"] ["hv2"] ["hv3"]) > + OVN_WAIT_PATCH_PORT_FLOWS(["ln4"], ["hv4"]) > > wait_row_count Port_Binding 1 logical_port=cr-router-to-underlay > > @@ -22704,7 +22730,8 @@ m4_define([DVR_N_S_PING], > > wait_for_ports_up > ovn-nbctl --wait=sb sync > - > + OVN_WAIT_PATCH_PORT_FLOWS(["ln1"] ["ln2"], ["hv1"] ["hv2"] ["hv3"]) > + OVN_WAIT_PATCH_PORT_FLOWS(["ln4"], ["hv4"]) > > OVN_POPULATE_ARP > > -- > 2.31.1 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev >
diff --git a/tests/ovn.at b/tests/ovn.at index bfaa41962..b855653ac 100644 --- a/tests/ovn.at +++ b/tests/ovn.at @@ -76,19 +76,22 @@ m4_divert_text([PREPARE_TESTS], } ovn_wait_patch_port_flows () { - patch_port=$1 - hv=$2 - echo "$3: waiting for flows for $patch_port on $hv" - # Patch port might be created after ports are reported up - OVS_WAIT_UNTIL([ - test 1 = $(as $hv ovs-vsctl show | grep "Port $patch_port" | wc -l) - ]) - # Wait for a flow outputing to patch port - OVS_WAIT_UNTIL([ - hv_patch_ofport=$(as $hv ovs-vsctl --bare --columns ofport find Interface name=$patch_port) - echo "$patch_port=$hv_patch_ofport" - test 1 = $(as $hv ovs-ofctl dump-flows br-int | grep -c "output:$hv_patch_ofport") - ]) + for localnet in $1; do + patch_port="patch-br-int-to-$localnet" + for hv in $2; do + echo "$3: waiting for flows for $patch_port on $hv" + # Patch port might be created after ports are reported up + OVS_WAIT_UNTIL([ + test 1 = $(as $hv ovs-vsctl show | grep "Port \b$patch_port\b" | wc -l) + ]) + # Wait for a flow outputing to patch port + OVS_WAIT_UNTIL([ + hv_patch_ofport=$(as $hv ovs-vsctl --bare --columns ofport find Interface name=$patch_port) + echo "$patch_port=$hv_patch_ofport" + test 1 -le $(as $hv ovs-ofctl dump-flows br-int | grep -c "output:\b$hv_patch_ofport\b") + ]) + done + done } ovn_wait_remote_output_flows () { @@ -2952,6 +2955,8 @@ for i in 1 2; do done done wait_for_ports_up +OVN_WAIT_PATCH_PORT_FLOWS(["ln1" "ln2" "ln3"], ["hv1"] ["hv2"]) + ovn-nbctl --wait=sb sync ovn-sbctl dump-flows > sbflows AT_CAPTURE_FILE([sbflows]) @@ -3122,6 +3127,7 @@ done wait_for_ports_up ovn-nbctl --wait=sb sync +OVN_WAIT_PATCH_PORT_FLOWS(["ln-11" "ln-21"], ["hv-1" "hv-2"]) ovn-sbctl dump-flows > sbflows AT_CAPTURE_FILE([sbflows]) @@ -3394,6 +3400,7 @@ for i in 1 2; do ovn-nbctl lsp-set-port-security $lsp_name f0:00:00:00:00:0$i OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up $lsp_name` = xup]) + OVN_WAIT_PATCH_PORT_FLOWS(["ln-$i-20"], ["hv-$i"]) done wait_for_ports_up @@ -3501,7 +3508,7 @@ done wait_for_ports_up -# Remote output flows are setup whe pb of remote is received +# Remote output flows are setup when pb of remote is received # Hence they can be setup after both ports have been reported up. OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv-1"],["hv-2"]) OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv-2"],["hv-1"]) @@ -3641,7 +3648,7 @@ for i in 1 2; do # Patch port might be created after ports are reported up # Wait for a flow outputing to patch port - OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln-100"], ["hv-$i"]) + OVN_WAIT_PATCH_PORT_FLOWS(["ln-100"], ["hv-$i"]) done test_packet() { @@ -3710,7 +3717,7 @@ for i in 1 2; do # Patch port might be created after ports are reported up # Wait for a flow outputing to patch port - OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln-100"], ["hv-$i"]) + OVN_WAIT_PATCH_PORT_FLOWS(["ln-100"], ["hv-$i"]) done # create taps on fabric to check vlan encapsulation there for i in 1 2; do @@ -3796,7 +3803,7 @@ for i in 1 2; do # Patch port might be created after ports are reported up # Wait for a flow outputing to patch port - OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln"], ["hv-$i"]) + OVN_WAIT_PATCH_PORT_FLOWS(["ln"], ["hv-$i"]) done for i in 1 2; do @@ -4021,6 +4028,7 @@ for tag in 10 20; do ovn-nbctl lsp-set-port-security $lsp_name f0:00:00:00:0$i:$tag OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up $lsp_name` = xup]) + OVN_WAIT_PATCH_PORT_FLOWS(["ln-$tag"], ["hv-$tag-$i"]) done done wait_for_ports_up @@ -8856,14 +8864,14 @@ AT_CAPTURE_FILE([sbflows]) # Wait until the patch ports are created in hv1 and hv2 to connect br-int to br-eth0 AT_CHECK([ovn-nbctl set logical_router lr0 options:chassis=hv1]) -OVS_WAIT_UNTIL([test 1 = `as hv1 ovs-vsctl show | \ -grep "Port patch-br-int-to-ln_port" | wc -l`]) +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv1"]) AT_CHECK([ovn-nbctl set logical_router lr0 options:chassis=hv2]) -OVS_WAIT_UNTIL([test 1 = `as hv2 ovs-vsctl show | \ -grep "Port patch-br-int-to-ln_port" | wc -l`]) +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"]) # Temporarily remove lr0 chassis -AT_CHECK([ovn-nbctl remove logical_router lr0 options chassis]) +# Wait for hv confirmation to make sure chassis is removed before we reset pcap +# Otherwise a garp might be sent after pcap have been reset but before chassis is removed +AT_CHECK([ovn-nbctl --wait=hv remove logical_router lr0 options chassis]) reset_pcap_file() { local hv=$1 @@ -11324,6 +11332,8 @@ check as ext1 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys wait_for_ports_up check ovn-nbctl --wait=sb sync +OVN_WAIT_PATCH_PORT_FLOWS(["ln-alice"], ["gw1"] ["gw2"]) +OVN_WAIT_PATCH_PORT_FLOWS(["ln-outside"], ["ext1"]) ovn-sbctl dump-flows > sbflows AT_CAPTURE_FILE([sbflows]) @@ -11540,6 +11550,7 @@ check as hv3 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys dnl Allow some time for ovn-northd and ovn-controller to catch up. wait_for_ports_up ovn-nbctl --wait=hv sync +OVN_WAIT_PATCH_PORT_FLOWS(["ln-outside"], ["hv3"]) (echo "---------NB dump-----" ovn-nbctl show @@ -11654,7 +11665,7 @@ OVN_CHECK_PACKETS_UNIQ([hv3/vif1-tx.pcap], [hv3-vif1.expected]) as hv2 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys # Wait until the patch ports are created in hv2 to connect br-int to br-phys -OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln-alice"], ["hv2"]) +OVN_WAIT_PATCH_PORT_FLOWS(["ln-alice"], ["hv2"]) dnl Allow some time for ovn-controller to catch up. wait_for_ports_up @@ -11733,6 +11744,7 @@ ovn-nbctl lsp-add foo foo2 \ # Allow some time for ovn-northd and ovn-controller to catch up. wait_for_ports_up check ovn-nbctl --wait=hv sync +OVN_WAIT_PATCH_PORT_FLOWS(["ln-alice"], ["hv1"]) : > hv1-vif2.expected @@ -11831,8 +11843,7 @@ OVN_CHECK_PACKETS([hv1/snoopvif-tx.pcap], [packets]) AT_CHECK([as hv2 ovs-vsctl set Open_vSwitch . external-ids:ovn-bridge-mappings=physnet1:br-phys]) # Wait until the patch ports are created in hv2 to connect br-int to br-phys -OVS_WAIT_UNTIL([test 1 = `as hv2 ovs-vsctl show | \ -grep "Port patch-br-int-to-ln_port" | wc -l`]) +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"]) # Wait for packets to be received. OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100]) @@ -11875,7 +11886,7 @@ ovs-vsctl -- add-port br-int hv3-vif2 -- \ AT_CHECK([as hv3 ovs-vsctl set Open_vSwitch . external-ids:ovn-bridge-mappings=physnet1:br-phys]) # Wait until the patch ports are created in hv3 to connect br-int to br-phys -OVN_WAIT_PATCH_PORT_FLOWS(["patch-br-int-to-ln_port"], ["hv3"]) +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv3"]) # Re-add nat-addresses option ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="router" @@ -13550,6 +13561,7 @@ AT_CHECK([ovn-nbctl lsp-set-options ln_port network_name=physnet1]) # wait for earlier changes to take effect wait_for_ports_up check ovn-nbctl --wait=hv sync +OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"] ["hv3"]) reset_pcap_file() { local iface=$1 @@ -14762,6 +14774,13 @@ reset_env # Start port migration hv1 -> hv2: both hypervisors are now bound check ovn-nbctl lsp-set-options migrator requested-chassis=hv1,hv2 wait_for_ports_up +OVN_WAIT_PATCH_PORT_FLOWS(["public"], ["hv1"]) +OVN_WAIT_PATCH_PORT_FLOWS(["public"], ["hv2"]) +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv1"],["hv2"]) +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv2"],["hv1"]) +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv3"],[hv1"]) +OVN_WAIT_REMOTE_OUTPUT_FLOWS(["hv3"],[hv2"]) + wait_column "$hv1_uuid" Port_Binding chassis logical_port=migrator wait_column "$hv1_uuid" Port_Binding requested_chassis logical_port=migrator wait_column "$hv2_uuid" Port_Binding additional_chassis logical_port=migrator @@ -20079,6 +20098,11 @@ ovn-nbctl lsp-add ls2 ls2-to-router -- set Logical_Switch_Port ls2-to-router typ wait_for_ports_up ovn-nbctl --wait=sb sync #ovn-sbctl dump-flows +for i in 1 2; do + for j in 1 2; do + OVN_WAIT_PATCH_PORT_FLOWS(["ln$j"], ["hv$i"]) + done +done ovn-nbctl show ovn-sbctl show @@ -22484,6 +22508,8 @@ m4_define([DVR_N_S_ARP_HANDLING], ovn-nbctl lrp-set-gateway-chassis router-to-underlay hv3 wait_for_ports_up ovn-nbctl --wait=sb sync + OVN_WAIT_PATCH_PORT_FLOWS(["ln1"] ["ln2"], ["hv1"] ["hv2"] ["hv3"]) + OVN_WAIT_PATCH_PORT_FLOWS(["ln4"], ["hv4"]) wait_row_count Port_Binding 1 logical_port=cr-router-to-underlay @@ -22704,7 +22730,8 @@ m4_define([DVR_N_S_PING], wait_for_ports_up ovn-nbctl --wait=sb sync - + OVN_WAIT_PATCH_PORT_FLOWS(["ln1"] ["ln2"], ["hv1"] ["hv2"] ["hv3"]) + OVN_WAIT_PATCH_PORT_FLOWS(["ln4"], ["hv4"]) OVN_POPULATE_ARP
The following test cases were sometimes failing, (mainly) for the same reason i.e. packet lost as being sent before patch ports were installed. - 2 HVs, 2 LS, switching between multiple localnet ports with same tags - VLAN transparency, passthru=true, ARP responder disabled - send gratuitous arp for l3gateway only on selected chassis - 4 HV, 3 LS, 2 LR, packet test with HA distributed router gateway port - 1 LR with distributed router gateway port - send gratuitous arp for NAT rules on distributed router - send gratuitous ARP for NAT rules on HA distributed router - localnet connectivity with multiple requested-chassis - 2 HVs, 2 lports/HV, localnet ports, DVR chassis mac - 2 HVs, 4 lports/HV, localnet ports - 2 HVs, 2 LS, routing works for multiple collocated segments attached to different switches - 2 HVs, 1 LS, no switching between multiple localnet ports with different tags Signed-off-by: Xavier Simonart <xsimonar@redhat.com> --- v2: - handled Mark's comments. rebased on origin/main --- tests/ovn.at | 81 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 54 insertions(+), 27 deletions(-)