diff mbox series

[ovs-dev] ovn-controller: Fix incremental processing of Port_Binding deletes.

Message ID 1598869480-28137-1-git-send-email-dceara@redhat.com
State Superseded
Headers show
Series [ovs-dev] ovn-controller: Fix incremental processing of Port_Binding deletes. | expand

Commit Message

Dumitru Ceara Aug. 31, 2020, 10:24 a.m. UTC
If a Port_Binding is deleted from the Southbound DB and the
corresponding OVS interface is also deleted from the OVS DB, and
if both updates are received and processed by ovn-controller in
the same iteration, ovn-controller should not be allowed to write
to the (to be deleted) Port_Binding record stored in memory.

This commit also adds three new unixctl debug commands for
ovn-controller:
- debug/pause: pause ovn-controller processing, except unixctl commands.
- debug/resume: resume ovn-controller processing.
- debug/status: return the status of the ovn-controller processing.

These new commands are needed by the test for this scenario as without
them we have no way of ensuring predictable results. Users should not
use these commands in production. This is also why the commands are not
documented.

CC: Numan Siddique <numans@ovn.org>
Fixes: 6b0f01116bab ("ovn-controller: Handle runtime data changes in flow output engine")
Reported-by: Tim Rozet <trozet@redhat.com>
Reported-at: https://bugzilla.redhat.com/1871961
Signed-off-by: Dumitru Ceara <dceara@redhat.com>
---
 controller/binding.c        | 74 ++++++++++++++++++++++++++++++---------------
 controller/ovn-controller.c | 58 +++++++++++++++++++++++++++++++++++
 tests/ovn.at                | 38 +++++++++++++++++++++++
 3 files changed, 145 insertions(+), 25 deletions(-)

Comments

Numan Siddique Aug. 31, 2020, 11:24 a.m. UTC | #1
On Mon, Aug 31, 2020 at 3:55 PM Dumitru Ceara <dceara@redhat.com> wrote:

> If a Port_Binding is deleted from the Southbound DB and the
> corresponding OVS interface is also deleted from the OVS DB, and
> if both updates are received and processed by ovn-controller in
> the same iteration, ovn-controller should not be allowed to write
> to the (to be deleted) Port_Binding record stored in memory.
>
> This commit also adds three new unixctl debug commands for
> ovn-controller:
> - debug/pause: pause ovn-controller processing, except unixctl commands.
> - debug/resume: resume ovn-controller processing.
> - debug/status: return the status of the ovn-controller processing.
>
> These new commands are needed by the test for this scenario as without
> them we have no way of ensuring predictable results. Users should not
> use these commands in production. This is also why the commands are not
> documented.
>
> CC: Numan Siddique <numans@ovn.org>
> Fixes: 6b0f01116bab ("ovn-controller: Handle runtime data changes in flow
> output engine")
> Reported-by: Tim Rozet <trozet@redhat.com>
> Reported-at: https://bugzilla.redhat.com/1871961
> Signed-off-by: Dumitru Ceara <dceara@redhat.com>
> ---
>

Thanks Dumitru for the fix.

The issue is seen because we handle OVS interface changes first and then
the port binding changes.
I think we can address this issue with lesser changes to the code by
handling port binding changes
first in the runtime data engine.

I think the I-P engine respects the order of inputs defined on an engine
node right ? If the engine guarantees
this, then I think we can take this approach.

What do you think ?

Thanks
Numan


>  controller/binding.c        | 74
> ++++++++++++++++++++++++++++++---------------
>  controller/ovn-controller.c | 58 +++++++++++++++++++++++++++++++++++
>  tests/ovn.at                | 38 +++++++++++++++++++++++
>  3 files changed, 145 insertions(+), 25 deletions(-)
>
> diff --git a/controller/binding.c b/controller/binding.c
> index 3c102dc..80a7898 100644
> --- a/controller/binding.c
> +++ b/controller/binding.c
> @@ -837,24 +837,40 @@ claim_lport(const struct sbrec_port_binding *pb,
>              return false;
>          }
>
> -        if (pb->chassis) {
> -            VLOG_INFO("Changing chassis for lport %s from %s to %s.",
> -                    pb->logical_port, pb->chassis->name,
> -                    chassis_rec->name);
> -        } else {
> -            VLOG_INFO("Claiming lport %s for this chassis.",
> pb->logical_port);
> -        }
> -        for (int i = 0; i < pb->n_mac; i++) {
> -            VLOG_INFO("%s: Claiming %s", pb->logical_port, pb->mac[i]);
> -        }
> +        /* Update the port_binding with our chassis only if the port
> binding
> +         * is not being deleted from the SB.
> +         */
> +        if (!sbrec_port_binding_is_deleted(pb)) {
> +            if (pb->chassis) {
> +                VLOG_INFO("Changing chassis for lport %s from %s to %s.",
> +                          pb->logical_port, pb->chassis->name,
> +                          chassis_rec->name);
> +            } else {
> +                VLOG_INFO("Claiming lport %s for this chassis.",
> +                          pb->logical_port);
> +            }
> +            for (size_t i = 0; i < pb->n_mac; i++) {
> +                VLOG_INFO("%s: Claiming %s", pb->logical_port,
> pb->mac[i]);
> +            }
>
> -        sbrec_port_binding_set_chassis(pb, chassis_rec);
> +            sbrec_port_binding_set_chassis(pb, chassis_rec);
> +        }
>
> +        /* In any case, update tracked_datapaths as we need to track all
> types
> +         * of updates, including deletes.
> +         */
>          if (tracked_datapaths) {
>              update_lport_tracking(pb, tracked_datapaths);
>          }
>      }
>
> +    /* No need to check and update the encaps if the port_binding is being
> +     * deleted.
> +     */
> +    if (sbrec_port_binding_is_deleted(pb)) {
> +        return true;
> +    }
> +
>      /* Check if the port encap binding, if any, has changed */
>      struct sbrec_encap *encap_rec =
>          sbrec_get_port_encap(chassis_rec, iface_rec);
> @@ -879,27 +895,35 @@ static bool
>  release_lport(const struct sbrec_port_binding *pb, bool sb_readonly,
>                struct hmap *tracked_datapaths)
>  {
> -    if (pb->encap) {
> -        if (sb_readonly) {
> -            return false;
> +    /* Clear the port_binding encap, chassis, and virtual_parent fields
> +     * only if the port binding is not being deleted from the SB.
> +     */
> +    if (!sbrec_port_binding_is_deleted(pb)) {
> +        if (pb->encap) {
> +            if (sb_readonly) {
> +                return false;
> +            }
> +            sbrec_port_binding_set_encap(pb, NULL);
>          }
> -        sbrec_port_binding_set_encap(pb, NULL);
> -    }
>
> -    if (pb->chassis) {
> -        if (sb_readonly) {
> -            return false;
> +        if (pb->chassis) {
> +            if (sb_readonly) {
> +                return false;
> +            }
> +            sbrec_port_binding_set_chassis(pb, NULL);
>          }
> -        sbrec_port_binding_set_chassis(pb, NULL);
> -    }
>
> -    if (pb->virtual_parent) {
> -        if (sb_readonly) {
> -            return false;
> +        if (pb->virtual_parent) {
> +            if (sb_readonly) {
> +                return false;
> +            }
> +            sbrec_port_binding_set_virtual_parent(pb, NULL);
>          }
> -        sbrec_port_binding_set_virtual_parent(pb, NULL);
>      }
>
> +    /* In any case, update tracked_datapaths as we need to track all types
> +     * of updates, including deletes.
> +     */
>      update_lport_tracking(pb, tracked_datapaths);
>      VLOG_INFO("Releasing lport %s from this chassis.", pb->logical_port);
>      return true;
> diff --git a/controller/ovn-controller.c b/controller/ovn-controller.c
> index d299c61..37b09c4 100644
> --- a/controller/ovn-controller.c
> +++ b/controller/ovn-controller.c
> @@ -73,6 +73,9 @@ static unixctl_cb_func extend_table_list;
>  static unixctl_cb_func inject_pkt;
>  static unixctl_cb_func engine_recompute_cmd;
>  static unixctl_cb_func cluster_state_reset_cmd;
> +static unixctl_cb_func debug_pause_execution;
> +static unixctl_cb_func debug_resume_execution;
> +static unixctl_cb_func debug_status_execution;
>
>  #define DEFAULT_BRIDGE_NAME "br-int"
>  #define DEFAULT_PROBE_INTERVAL_MSEC 5000
> @@ -2342,6 +2345,14 @@ main(int argc, char *argv[])
>                               cluster_state_reset_cmd,
>                               &reset_ovnsb_idl_min_index);
>
> +    bool paused = false;
> +    unixctl_command_register("debug/pause", "", 0, 0,
> debug_pause_execution,
> +                             &paused);
> +    unixctl_command_register("debug/resume", "", 0, 0,
> debug_resume_execution,
> +                             &paused);
> +    unixctl_command_register("debug/status", "", 0, 0,
> debug_status_execution,
> +                             &paused);
> +
>      unsigned int ovs_cond_seqno = UINT_MAX;
>      unsigned int ovnsb_cond_seqno = UINT_MAX;
>
> @@ -2350,6 +2361,15 @@ main(int argc, char *argv[])
>      restart = false;
>      bool sb_monitor_all = false;
>      while (!exiting) {
> +        /* If we're paused just run the unixctl server and skip most of
> the
> +         * processing loop.
> +         */
> +        if (paused) {
> +            unixctl_server_run(unixctl);
> +            unixctl_server_wait(unixctl);
> +            goto loop_done;
> +        }
> +
>          engine_init_run();
>
>          struct ovsdb_idl_txn *ovs_idl_txn =
> ovsdb_idl_loop_run(&ovs_idl_loop);
> @@ -2604,6 +2624,8 @@ main(int argc, char *argv[])
>
>          ovsdb_idl_track_clear(ovnsb_idl_loop.idl);
>          ovsdb_idl_track_clear(ovs_idl_loop.idl);
> +
> +loop_done:
>          poll_block();
>          if (should_service_stop()) {
>              exiting = true;
> @@ -2857,3 +2879,39 @@ cluster_state_reset_cmd(struct unixctl_conn *conn,
> int argc OVS_UNUSED,
>      poll_immediate_wake();
>      unixctl_command_reply(conn, NULL);
>  }
> +
> +static void
> +debug_pause_execution(struct unixctl_conn *conn, int argc OVS_UNUSED,
> +                      const char *argv[] OVS_UNUSED, void *paused_)
> +{
> +    bool *paused = paused_;
> +
> +    VLOG_INFO("User triggered execution pause.");
> +    *paused = true;
> +    unixctl_command_reply(conn, NULL);
> +}
> +
> +static void
> +debug_resume_execution(struct unixctl_conn *conn, int argc OVS_UNUSED,
> +                       const char *argv[] OVS_UNUSED, void *paused_)
> +{
> +    bool *paused = paused_;
> +
> +    VLOG_INFO("User triggered execution resume.");
> +    *paused = false;
> +    poll_immediate_wake();
> +    unixctl_command_reply(conn, NULL);
> +}
> +
> +static void
> +debug_status_execution(struct unixctl_conn *conn, int argc OVS_UNUSED,
> +                       const char *argv[] OVS_UNUSED, void *paused_)
> +{
> +    bool *paused = paused_;
> +
> +    if (*paused) {
> +        unixctl_command_reply(conn, "paused");
> +    } else {
> +        unixctl_command_reply(conn, "running");
> +    }
> +}
> diff --git a/tests/ovn.at b/tests/ovn.at
> index c4edbd9..5ad51c0 100644
> --- a/tests/ovn.at
> +++ b/tests/ovn.at
> @@ -21371,3 +21371,41 @@ AT_CHECK([ovn-sbctl find mac ip=10.0.0.2
> mac='"00:00:00:00:03:02"' logical_port=
>  OVN_CLEANUP([hv1],[hv2])
>
>  AT_CLEANUP
> +
> +AT_SETUP([ovn -- Delete Port_Binding and OVS port Incremental Processing])
> +ovn_start
> +
> +net_add n1
> +sim_add hv1
> +as hv1
> +ovs-vsctl add-br br-phys
> +ovn_attach n1 br-phys 192.168.0.10
> +
> +ovn-nbctl ls-add ls
> +ovn-nbctl lsp-add ls lsp
> +
> +as hv1 ovs-vsctl \
> +    -- add-port br-int vif1 \
> +    -- set Interface vif1 external_ids:iface-id=lsp
> +
> +# Wait for port to be bound.
> +OVS_WAIT_UNTIL([test $(ovn-sbctl --columns _uuid --bare list chassis hv1
> | wc -l) -eq 1])
> +ch=$(ovn-sbctl --columns _uuid --bare list chassis hv1)
> +OVS_WAIT_UNTIL([test $(ovn-sbctl --columns chassis --bare list
> port_binding lsp | grep $ch -c) -eq 1])
> +
> +# Pause ovn-controller.
> +as hv1 ovn-appctl -t ovn-controller debug/pause
> +
> +# Delete port binding and OVS port. The updates will be processed in the
> same
> +# loop in ovn-controller when it resumes.
> +ovn-nbctl --wait=sb lsp-del lsp
> +as hv1 ovs-vsctl del-port vif1
> +
> +# Resume ovn-controller.
> +as hv1 ovn-appctl -t ovn-controller debug/resume
> +
> +# Make sure ovn-controller runs fine.
> +OVS_WAIT_UNTIL([test x$(as hv1 ovn-appctl -t ovn-controller debug/status)
> = "xrunning"])
> +
> +OVN_CLEANUP([hv1])
> +AT_CLEANUP
> --
> 1.8.3.1
>
> _______________________________________________
> dev mailing list
> dev@openvswitch.org
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>
>
Dumitru Ceara Aug. 31, 2020, 12:04 p.m. UTC | #2
On 8/31/20 1:24 PM, Numan Siddique wrote:
> 
> 
> On Mon, Aug 31, 2020 at 3:55 PM Dumitru Ceara <dceara@redhat.com
> <mailto:dceara@redhat.com>> wrote:
> 
>     If a Port_Binding is deleted from the Southbound DB and the
>     corresponding OVS interface is also deleted from the OVS DB, and
>     if both updates are received and processed by ovn-controller in
>     the same iteration, ovn-controller should not be allowed to write
>     to the (to be deleted) Port_Binding record stored in memory.
> 
>     This commit also adds three new unixctl debug commands for
>     ovn-controller:
>     - debug/pause: pause ovn-controller processing, except unixctl commands.
>     - debug/resume: resume ovn-controller processing.
>     - debug/status: return the status of the ovn-controller processing.
> 
>     These new commands are needed by the test for this scenario as without
>     them we have no way of ensuring predictable results. Users should not
>     use these commands in production. This is also why the commands are not
>     documented.
> 
>     CC: Numan Siddique <numans@ovn.org <mailto:numans@ovn.org>>
>     Fixes: 6b0f01116bab ("ovn-controller: Handle runtime data changes in
>     flow output engine")
>     Reported-by: Tim Rozet <trozet@redhat.com <mailto:trozet@redhat.com>>
>     Reported-at: https://bugzilla.redhat.com/1871961
>     Signed-off-by: Dumitru Ceara <dceara@redhat.com
>     <mailto:dceara@redhat.com>>
>     ---
> 
> 
> Thanks Dumitru for the fix. 
> 
> The issue is seen because we handle OVS interface changes first and then
> the port binding changes.
> I think we can address this issue with lesser changes to the code by
> handling port binding changes
> first in the runtime data engine.
> 
> I think the I-P engine respects the order of inputs defined on an engine
> node right ? If the engine guarantees
> this, then I think we can take this approach.
> 
> What do you think ?
> 
> Thanks
> Numan
>  

Yes, that works and is indeed a way smaller change. The new test case
will fail if the order of the incremental engine nodes is changed back.

I'll also add a comment in ovn-controller.c to mention why order is
relevant.

I'll send a v2 soon.

Regards,
Dumitru
diff mbox series

Patch

diff --git a/controller/binding.c b/controller/binding.c
index 3c102dc..80a7898 100644
--- a/controller/binding.c
+++ b/controller/binding.c
@@ -837,24 +837,40 @@  claim_lport(const struct sbrec_port_binding *pb,
             return false;
         }
 
-        if (pb->chassis) {
-            VLOG_INFO("Changing chassis for lport %s from %s to %s.",
-                    pb->logical_port, pb->chassis->name,
-                    chassis_rec->name);
-        } else {
-            VLOG_INFO("Claiming lport %s for this chassis.", pb->logical_port);
-        }
-        for (int i = 0; i < pb->n_mac; i++) {
-            VLOG_INFO("%s: Claiming %s", pb->logical_port, pb->mac[i]);
-        }
+        /* Update the port_binding with our chassis only if the port binding
+         * is not being deleted from the SB.
+         */
+        if (!sbrec_port_binding_is_deleted(pb)) {
+            if (pb->chassis) {
+                VLOG_INFO("Changing chassis for lport %s from %s to %s.",
+                          pb->logical_port, pb->chassis->name,
+                          chassis_rec->name);
+            } else {
+                VLOG_INFO("Claiming lport %s for this chassis.",
+                          pb->logical_port);
+            }
+            for (size_t i = 0; i < pb->n_mac; i++) {
+                VLOG_INFO("%s: Claiming %s", pb->logical_port, pb->mac[i]);
+            }
 
-        sbrec_port_binding_set_chassis(pb, chassis_rec);
+            sbrec_port_binding_set_chassis(pb, chassis_rec);
+        }
 
+        /* In any case, update tracked_datapaths as we need to track all types
+         * of updates, including deletes.
+         */
         if (tracked_datapaths) {
             update_lport_tracking(pb, tracked_datapaths);
         }
     }
 
+    /* No need to check and update the encaps if the port_binding is being
+     * deleted.
+     */
+    if (sbrec_port_binding_is_deleted(pb)) {
+        return true;
+    }
+
     /* Check if the port encap binding, if any, has changed */
     struct sbrec_encap *encap_rec =
         sbrec_get_port_encap(chassis_rec, iface_rec);
@@ -879,27 +895,35 @@  static bool
 release_lport(const struct sbrec_port_binding *pb, bool sb_readonly,
               struct hmap *tracked_datapaths)
 {
-    if (pb->encap) {
-        if (sb_readonly) {
-            return false;
+    /* Clear the port_binding encap, chassis, and virtual_parent fields
+     * only if the port binding is not being deleted from the SB.
+     */
+    if (!sbrec_port_binding_is_deleted(pb)) {
+        if (pb->encap) {
+            if (sb_readonly) {
+                return false;
+            }
+            sbrec_port_binding_set_encap(pb, NULL);
         }
-        sbrec_port_binding_set_encap(pb, NULL);
-    }
 
-    if (pb->chassis) {
-        if (sb_readonly) {
-            return false;
+        if (pb->chassis) {
+            if (sb_readonly) {
+                return false;
+            }
+            sbrec_port_binding_set_chassis(pb, NULL);
         }
-        sbrec_port_binding_set_chassis(pb, NULL);
-    }
 
-    if (pb->virtual_parent) {
-        if (sb_readonly) {
-            return false;
+        if (pb->virtual_parent) {
+            if (sb_readonly) {
+                return false;
+            }
+            sbrec_port_binding_set_virtual_parent(pb, NULL);
         }
-        sbrec_port_binding_set_virtual_parent(pb, NULL);
     }
 
+    /* In any case, update tracked_datapaths as we need to track all types
+     * of updates, including deletes.
+     */
     update_lport_tracking(pb, tracked_datapaths);
     VLOG_INFO("Releasing lport %s from this chassis.", pb->logical_port);
     return true;
diff --git a/controller/ovn-controller.c b/controller/ovn-controller.c
index d299c61..37b09c4 100644
--- a/controller/ovn-controller.c
+++ b/controller/ovn-controller.c
@@ -73,6 +73,9 @@  static unixctl_cb_func extend_table_list;
 static unixctl_cb_func inject_pkt;
 static unixctl_cb_func engine_recompute_cmd;
 static unixctl_cb_func cluster_state_reset_cmd;
+static unixctl_cb_func debug_pause_execution;
+static unixctl_cb_func debug_resume_execution;
+static unixctl_cb_func debug_status_execution;
 
 #define DEFAULT_BRIDGE_NAME "br-int"
 #define DEFAULT_PROBE_INTERVAL_MSEC 5000
@@ -2342,6 +2345,14 @@  main(int argc, char *argv[])
                              cluster_state_reset_cmd,
                              &reset_ovnsb_idl_min_index);
 
+    bool paused = false;
+    unixctl_command_register("debug/pause", "", 0, 0, debug_pause_execution,
+                             &paused);
+    unixctl_command_register("debug/resume", "", 0, 0, debug_resume_execution,
+                             &paused);
+    unixctl_command_register("debug/status", "", 0, 0, debug_status_execution,
+                             &paused);
+
     unsigned int ovs_cond_seqno = UINT_MAX;
     unsigned int ovnsb_cond_seqno = UINT_MAX;
 
@@ -2350,6 +2361,15 @@  main(int argc, char *argv[])
     restart = false;
     bool sb_monitor_all = false;
     while (!exiting) {
+        /* If we're paused just run the unixctl server and skip most of the
+         * processing loop.
+         */
+        if (paused) {
+            unixctl_server_run(unixctl);
+            unixctl_server_wait(unixctl);
+            goto loop_done;
+        }
+
         engine_init_run();
 
         struct ovsdb_idl_txn *ovs_idl_txn = ovsdb_idl_loop_run(&ovs_idl_loop);
@@ -2604,6 +2624,8 @@  main(int argc, char *argv[])
 
         ovsdb_idl_track_clear(ovnsb_idl_loop.idl);
         ovsdb_idl_track_clear(ovs_idl_loop.idl);
+
+loop_done:
         poll_block();
         if (should_service_stop()) {
             exiting = true;
@@ -2857,3 +2879,39 @@  cluster_state_reset_cmd(struct unixctl_conn *conn, int argc OVS_UNUSED,
     poll_immediate_wake();
     unixctl_command_reply(conn, NULL);
 }
+
+static void
+debug_pause_execution(struct unixctl_conn *conn, int argc OVS_UNUSED,
+                      const char *argv[] OVS_UNUSED, void *paused_)
+{
+    bool *paused = paused_;
+
+    VLOG_INFO("User triggered execution pause.");
+    *paused = true;
+    unixctl_command_reply(conn, NULL);
+}
+
+static void
+debug_resume_execution(struct unixctl_conn *conn, int argc OVS_UNUSED,
+                       const char *argv[] OVS_UNUSED, void *paused_)
+{
+    bool *paused = paused_;
+
+    VLOG_INFO("User triggered execution resume.");
+    *paused = false;
+    poll_immediate_wake();
+    unixctl_command_reply(conn, NULL);
+}
+
+static void
+debug_status_execution(struct unixctl_conn *conn, int argc OVS_UNUSED,
+                       const char *argv[] OVS_UNUSED, void *paused_)
+{
+    bool *paused = paused_;
+
+    if (*paused) {
+        unixctl_command_reply(conn, "paused");
+    } else {
+        unixctl_command_reply(conn, "running");
+    }
+}
diff --git a/tests/ovn.at b/tests/ovn.at
index c4edbd9..5ad51c0 100644
--- a/tests/ovn.at
+++ b/tests/ovn.at
@@ -21371,3 +21371,41 @@  AT_CHECK([ovn-sbctl find mac ip=10.0.0.2 mac='"00:00:00:00:03:02"' logical_port=
 OVN_CLEANUP([hv1],[hv2])
 
 AT_CLEANUP
+
+AT_SETUP([ovn -- Delete Port_Binding and OVS port Incremental Processing])
+ovn_start
+
+net_add n1
+sim_add hv1
+as hv1
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.10
+
+ovn-nbctl ls-add ls
+ovn-nbctl lsp-add ls lsp
+
+as hv1 ovs-vsctl \
+    -- add-port br-int vif1 \
+    -- set Interface vif1 external_ids:iface-id=lsp
+
+# Wait for port to be bound.
+OVS_WAIT_UNTIL([test $(ovn-sbctl --columns _uuid --bare list chassis hv1 | wc -l) -eq 1])
+ch=$(ovn-sbctl --columns _uuid --bare list chassis hv1)
+OVS_WAIT_UNTIL([test $(ovn-sbctl --columns chassis --bare list port_binding lsp | grep $ch -c) -eq 1])
+
+# Pause ovn-controller.
+as hv1 ovn-appctl -t ovn-controller debug/pause
+
+# Delete port binding and OVS port. The updates will be processed in the same
+# loop in ovn-controller when it resumes.
+ovn-nbctl --wait=sb lsp-del lsp
+as hv1 ovs-vsctl del-port vif1
+
+# Resume ovn-controller.
+as hv1 ovn-appctl -t ovn-controller debug/resume
+
+# Make sure ovn-controller runs fine.
+OVS_WAIT_UNTIL([test x$(as hv1 ovn-appctl -t ovn-controller debug/status) = "xrunning"])
+
+OVN_CLEANUP([hv1])
+AT_CLEANUP