Message ID | owrt-patch-20160101-v4-cc-1@vittgam.net |
---|---|
State | Accepted |
Headers | show |
Hi, the patch/series does not apply to CC John On 01/01/2016 00:00, Vittorio G (VittGam) wrote: > Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> > --- > > --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c > +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c > @@ -1417,19 +1417,19 @@ static int esw_probe(struct platform_device *pdev) > } > > port_map = of_get_property(np, "ralink,portmap", NULL); > - if (port_map) > + if (port_map) > esw->port_map = be32_to_cpu(*port_map); > > reg_init = of_get_property(np, "ralink,fct2", NULL); > - if (reg_init) > + if (reg_init) > esw->reg_initval_fct2 = be32_to_cpu(*reg_init); > > reg_init = of_get_property(np, "ralink,fpa2", NULL); > - if (reg_init) > + if (reg_init) > esw->reg_initval_fpa2 = be32_to_cpu(*reg_init); > > reg_init = of_get_property(np, "ralink,led_polarity", NULL); > - if (reg_init) > + if (reg_init) > esw->reg_led_polarity = be32_to_cpu(*reg_init); > > swdev = &esw->swdev; > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
Hi John, It does here... openwrt@asd:~$ git clone https://github.com/openwrt/openwrt openwrt-cc Cloning into 'openwrt-cc'... remote: Counting objects: 338616, done. remote: Compressing objects: 100% (130/130), done. remote: Total 338616 (delta 61), reused 0 (delta 0), pack-reused 338484 Receiving objects: 100% (338616/338616), 120.31 MiB | 26.38 MiB/s, done. Resolving deltas: 100% (229507/229507), done. openwrt@asd:~$ cd openwrt-cc/ openwrt@asd:~/openwrt-cc$ git checkout chaos_calmer Branch chaos_calmer set up to track remote branch chaos_calmer from origin. Switched to a new branch 'chaos_calmer' openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-1.patch patching file target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-2.patch patching file target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-3.patch patching file target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-4.patch patching file target/linux/ramips/dts/HT-TM02.dts openwrt@asd:~/openwrt-cc$ Cheers, Vittorio On 03/01/2016 15:53:56 CET, John Crispin wrote: > Hi, > > the patch/series does not apply to CC > > John > > On 01/01/2016 00:00, Vittorio G (VittGam) wrote: >> Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> >> --- >> >> --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >> +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >> @@ -1417,19 +1417,19 @@ static int esw_probe(struct platform_device *pdev) >> } >> >> port_map = of_get_property(np, "ralink,portmap", NULL); >> - if (port_map) >> + if (port_map) >> esw->port_map = be32_to_cpu(*port_map); >> >> reg_init = of_get_property(np, "ralink,fct2", NULL); >> - if (reg_init) >> + if (reg_init) >> esw->reg_initval_fct2 = be32_to_cpu(*reg_init); >> >> reg_init = of_get_property(np, "ralink,fpa2", NULL); >> - if (reg_init) >> + if (reg_init) >> esw->reg_initval_fpa2 = be32_to_cpu(*reg_init); >> >> reg_init = of_get_property(np, "ralink,led_polarity", NULL); >> - if (reg_init) >> + if (reg_init) >> esw->reg_led_polarity = be32_to_cpu(*reg_init); >> >> swdev = &esw->swdev; >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Hi, blogic@debian:/openwrt/CC$ patchwork 561992 Applying: ramips: Fix whitespace in the rt3052 switch driver. fatal: corrupt patch at line 6 Patch failed at 0001 ramips: Fix whitespace in the rt3052 switch driver. When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort". if you look at line 6 and 22 of the patch you will see that the leading space is missing. how did you generate these patches ? John On 03/01/2016 18:30, Vittorio G (VittGam) wrote: > Hi John, > > It does here... > > openwrt@asd:~$ git clone https://github.com/openwrt/openwrt openwrt-cc > Cloning into 'openwrt-cc'... > remote: Counting objects: 338616, done. > remote: Compressing objects: 100% (130/130), done. > remote: Total 338616 (delta 61), reused 0 (delta 0), pack-reused 338484 > Receiving objects: 100% (338616/338616), 120.31 MiB | 26.38 MiB/s, done. > Resolving deltas: 100% (229507/229507), done. > openwrt@asd:~$ cd openwrt-cc/ > openwrt@asd:~/openwrt-cc$ git checkout chaos_calmer > Branch chaos_calmer set up to track remote branch chaos_calmer from origin. > Switched to a new branch 'chaos_calmer' > openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-1.patch > patching file > target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c > openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-2.patch > patching file > target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c > openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-3.patch > patching file > target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c > openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-4.patch > patching file target/linux/ramips/dts/HT-TM02.dts > openwrt@asd:~/openwrt-cc$ > > Cheers, > Vittorio > > On 03/01/2016 15:53:56 CET, John Crispin wrote: >> Hi, >> >> the patch/series does not apply to CC >> >> John >> >> On 01/01/2016 00:00, Vittorio G (VittGam) wrote: >>> Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> >>> --- >>> >>> --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >>> +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >>> @@ -1417,19 +1417,19 @@ static int esw_probe(struct platform_device >>> *pdev) >>> } >>> >>> port_map = of_get_property(np, "ralink,portmap", NULL); >>> - if (port_map) >>> + if (port_map) >>> esw->port_map = be32_to_cpu(*port_map); >>> >>> reg_init = of_get_property(np, "ralink,fct2", NULL); >>> - if (reg_init) >>> + if (reg_init) >>> esw->reg_initval_fct2 = be32_to_cpu(*reg_init); >>> >>> reg_init = of_get_property(np, "ralink,fpa2", NULL); >>> - if (reg_init) >>> + if (reg_init) >>> esw->reg_initval_fpa2 = be32_to_cpu(*reg_init); >>> >>> reg_init = of_get_property(np, "ralink,led_polarity", NULL); >>> - if (reg_init) >>> + if (reg_init) >>> esw->reg_led_polarity = be32_to_cpu(*reg_init); >>> >>> swdev = &esw->swdev; >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On 03/01/2016 18:37:03 CET, John Crispin wrote: > blogic@debian:/openwrt/CC$ patchwork 561992 > Applying: ramips: Fix whitespace in the rt3052 switch driver. > fatal: corrupt patch at line 6 > Patch failed at 0001 ramips: Fix whitespace in the rt3052 switch driver. > When you have resolved this problem run "git am --resolved". > If you would prefer to skip this patch, instead run "git am --skip". > To restore the original branch and stop patching run "git am --abort". In fact that is stricter, patch doesn't fail... By the way, is `patchwork` a shell alias? It seems interesting. ;) > if you look at line 6 and 22 of the patch you will see that the leading > space is missing. how did you generate these patches ? Ehm. This particular patch has a long history, I can't remember anymore. And in fact this v4-cc-1 is the only one that's bad. For the more recent patches I used quilt. Cheers, Vittorio > On 03/01/2016 18:30, Vittorio G (VittGam) wrote: >> Hi John, >> >> It does here... >> >> openwrt@asd:~$ git clone https://github.com/openwrt/openwrt openwrt-cc >> Cloning into 'openwrt-cc'... >> remote: Counting objects: 338616, done. >> remote: Compressing objects: 100% (130/130), done. >> remote: Total 338616 (delta 61), reused 0 (delta 0), pack-reused 338484 >> Receiving objects: 100% (338616/338616), 120.31 MiB | 26.38 MiB/s, done. >> Resolving deltas: 100% (229507/229507), done. >> openwrt@asd:~$ cd openwrt-cc/ >> openwrt@asd:~/openwrt-cc$ git checkout chaos_calmer >> Branch chaos_calmer set up to track remote branch chaos_calmer from origin. >> Switched to a new branch 'chaos_calmer' >> openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-1.patch >> patching file >> target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >> openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-2.patch >> patching file >> target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >> openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-3.patch >> patching file >> target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >> openwrt@asd:~/openwrt-cc$ patch -p1 < ../v4-cc-4.patch >> patching file target/linux/ramips/dts/HT-TM02.dts >> openwrt@asd:~/openwrt-cc$ >> >> Cheers, >> Vittorio >> >> On 03/01/2016 15:53:56 CET, John Crispin wrote: >>> Hi, >>> >>> the patch/series does not apply to CC >>> >>> John >>> >>> On 01/01/2016 00:00, Vittorio G (VittGam) wrote: >>>> Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> >>>> --- >>>> >>>> --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >>>> +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c >>>> @@ -1417,19 +1417,19 @@ static int esw_probe(struct platform_device >>>> *pdev) >>>> } >>>> >>>> port_map = of_get_property(np, "ralink,portmap", NULL); >>>> - if (port_map) >>>> + if (port_map) >>>> esw->port_map = be32_to_cpu(*port_map); >>>> >>>> reg_init = of_get_property(np, "ralink,fct2", NULL); >>>> - if (reg_init) >>>> + if (reg_init) >>>> esw->reg_initval_fct2 = be32_to_cpu(*reg_init); >>>> >>>> reg_init = of_get_property(np, "ralink,fpa2", NULL); >>>> - if (reg_init) >>>> + if (reg_init) >>>> esw->reg_initval_fpa2 = be32_to_cpu(*reg_init); >>>> >>>> reg_init = of_get_property(np, "ralink,led_polarity", NULL); >>>> - if (reg_init) >>>> + if (reg_init) >>>> esw->reg_led_polarity = be32_to_cpu(*reg_init); >>>> >>>> swdev = &esw->swdev; >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c @@ -1417,19 +1417,19 @@ static int esw_probe(struct platform_device *pdev) } port_map = of_get_property(np, "ralink,portmap", NULL); - if (port_map) + if (port_map) esw->port_map = be32_to_cpu(*port_map); reg_init = of_get_property(np, "ralink,fct2", NULL); - if (reg_init) + if (reg_init) esw->reg_initval_fct2 = be32_to_cpu(*reg_init); reg_init = of_get_property(np, "ralink,fpa2", NULL); - if (reg_init) + if (reg_init) esw->reg_initval_fpa2 = be32_to_cpu(*reg_init); reg_init = of_get_property(np, "ralink,led_polarity", NULL); - if (reg_init) + if (reg_init) esw->reg_led_polarity = be32_to_cpu(*reg_init); swdev = &esw->swdev;
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> ---