diff mbox series

[v2,5/5] tfa-layerscape: Change to github and use the latest tag

Message ID mailman.37993.1682067592.3064139.openwrt-devel@lists.openwrt.org
State Accepted, archived
Headers show
Series None | expand

Commit Message

Wojciech Dubowik April 21, 2023, 8:59 a.m. UTC 
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
The dafault location of tfa-layerscape has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.

v2:
* restored ls1012afrdm board
* added platfrom defines to fiptool so ls-ddr-phy can be built

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
---
 package/boot/tfa-layerscape/Makefile          |  15 +-
 .../patches/001-fiptool-hostbuild-fixes.patch |  37 ++-
 ...ix-create_pbl-and-byte_swap-host-bui.patch |  16 +-
 ...plat-nxp-restore-ls1012afrdm-support.patch | 232 ++++++++++++++++++
 4 files changed, 264 insertions(+), 36 deletions(-)
 create mode 100644 package/boot/tfa-layerscape/patches/004-plat-nxp-restore-ls1012afrdm-support.patch

--
2.34.1

Comments

Christian Lamparter May 18, 2023, 2:56 p.m. UTC | #1 
On 4/21/23 10:59, Wojciech Dubowik via openwrt-devel wrote:
> The dafault location of tfa-layerscape has been changed from
> codeuaurora to github. Also use the latest tag for Layerscape
> Linux Development POC from NXP.
> 
> v2:
> * restored ls1012afrdm board
> * added platfrom defines to fiptool so ls-ddr-phy can be built
> 
> Signed-off-by: Wojciech Dubowik<Wojciech.Dubowik@protonmail.ch>

hmm, source.codeaurora.org (no longer?) resolves. So yes, this
needs to be updated.

I ran into issues applying this particular patch though.
(PKG_RELEASE:=$(AUTORELEASE) has recently being canned, but this is easy to fix)

what I'm scratching my head about are these:
---
Checking file package/boot/tfa-layerscape/patches/001-fiptool-hostbuild-fixes.patch
Hunk #1 succeeded at 1 with fuzz 1.
Hunk #4 FAILED at 39.
Hunk #5 FAILED at 77.
2 out of 5 hunks FAILED
checking file package/boot/tfa-layerscape/patches/003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch
Hunk #2 FAILED at 26.
1 out of 3 hunks FAILED
checking file package/boot/tfa-layerscape/patches/004-plat-nxp-restore-ls1012afrdm-support.patch
---

could you have more local changes to:
   001-fiptool-hostbuild-fixes.patch
   003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch
?

which need to be part of this patch?
(or does this depend on a previous patch, that needs to be applied first)?

Cheers,
Christian
Wojciech Dubowik May 19, 2023, 8:48 a.m. UTC | #2 
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
------- Original Message -------
On Thursday, May 18th, 2023 at 4:56 PM, Christian Lamparter <chunkeey@gmail.com> wrote:


> On 4/21/23 10:59, Wojciech Dubowik via openwrt-devel wrote:
> 
> > The dafault location of tfa-layerscape has been changed from
> > codeuaurora to github. Also use the latest tag for Layerscape
> > Linux Development POC from NXP.
> > 
> > v2:
> > * restored ls1012afrdm board
> > * added platfrom defines to fiptool so ls-ddr-phy can be built
> > 
> > Signed-off-by: Wojciech DubowikWojciech.Dubowik@protonmail.ch
> 
> 
> hmm, source.codeaurora.org (no longer?) resolves. So yes, this
> needs to be updated.
> 
> I ran into issues applying this particular patch though.
> (PKG_RELEASE:=$(AUTORELEASE) has recently being canned, but this is easy to fix)
> 
> what I'm scratching my head about are these:
> ---
> Checking file package/boot/tfa-layerscape/patches/001-fiptool-hostbuild-fixes.patch
> Hunk #1 succeeded at 1 with fuzz 1.
> Hunk #4 FAILED at 39.
> Hunk #5 FAILED at 77.
> 2 out of 5 hunks FAILED
> checking file package/boot/tfa-layerscape/patches/003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch
> Hunk #2 FAILED at 26.
> 1 out of 3 hunks FAILED
> checking file package/boot/tfa-layerscape/patches/004-plat-nxp-restore-ls1012afrdm-support.patch
> ---
> 
> could you have more local changes to:
> 001-fiptool-hostbuild-fixes.patch
> 003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch
> ?
That's strange as I haven't ran into such issues. I have just rebased patches on latest master. I have already fixed PKG_RELEASE and I have also removed two ls1028ardb specific patches which are not needed with the new uboot version.

Changes are on the my github branch. Could you give it a try?
https://github.com/wodu/openwrt/tree/ls-firmware

Cheers,
Wojtek
> 
> which need to be part of this patch?
> (or does this depend on a previous patch, that needs to be applied first)?
> 
> Cheers,
> Christian
diff mbox series

Patch

diff --git a/package/boot/tfa-layerscape/Makefile b/package/boot/tfa-layerscape/Makefile
index 072036da2f..d9d9242941 100644
--- a/package/boot/tfa-layerscape/Makefile
+++ b/package/boot/tfa-layerscape/Makefile
@@ -8,13 +8,13 @@ 
 include $(TOPDIR)/rules.mk

 PKG_NAME:=tfa-layerscape
-PKG_VERSION:=21.08
+PKG_VERSION:=lf-6.1.1-1.0.0
 PKG_RELEASE:=$(AUTORELEASE)

 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/atf
-PKG_SOURCE_VERSION:=LSDK-21.08
-PKG_MIRROR_HASH:=893f2d28a77dcc9d4413a619b4719ca5f1f4dc78dd824a8488e7d543e66bcf95
+PKG_SOURCE_URL:=https://github.com/nxp-qoriq/atf
+PKG_SOURCE_VERSION:=lf-6.1.1-1.0.0
+PKG_MIRROR_HASH:=c0e3c7d0cc9ee5f9ae68cd705ce7f07f714c4fe3fd4a5a79de5699e7865b759f
 PKG_BUILD_DEPENDS:=tfa-layerscape/host

 include $(INCLUDE_DIR)/host-build.mk
@@ -25,18 +25,19 @@  HOST_CFLAGS += -Wall -Werror -pedantic -std=c99
 define Host/Compile
 	$(MAKE) -C \
 		$(HOST_BUILD_DIR)/tools/fiptool \
+		PLAT_FIPTOOL_HELPER_MK="$(HOST_BUILD_DIR)/tools/nxp/plat_fiptool/plat_fiptool.mk"
 		CFLAGS="$(HOST_CFLAGS)" \
 		LDFLAGS="$(HOST_LDFLAGS)" \
 		HOSTCCFLAGS="$(HOST_CFLAGS)"
 	$(MAKE) -C \
-		$(HOST_BUILD_DIR)/tools/nxp \
+		$(HOST_BUILD_DIR)/tools/nxp/create_pbl \
 		CFLAGS="$(HOST_CFLAGS)"
 endef

 define Host/Install
 	$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/fiptool/fiptool $(STAGING_DIR_HOST)/bin/fiptool-layerscape
-	$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/nxp/create_pbl $(STAGING_DIR_HOST)/bin/tfa-create-pbl
-	$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/nxp/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
+	$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/nxp/create_pbl/create_pbl $(STAGING_DIR_HOST)/bin/tfa-create-pbl
+	$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/nxp/create_pbl/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef

 define Trusted-Firmware-A/Default
diff --git a/package/boot/tfa-layerscape/patches/001-fiptool-hostbuild-fixes.patch b/package/boot/tfa-layerscape/patches/001-fiptool-hostbuild-fixes.patch
index 4b74048754..8e7375cfa2 100644
--- a/package/boot/tfa-layerscape/patches/001-fiptool-hostbuild-fixes.patch
+++ b/package/boot/tfa-layerscape/patches/001-fiptool-hostbuild-fixes.patch
@@ -1,6 +1,6 @@ 
 --- a/Makefile
 +++ b/Makefile
-@@ -801,10 +801,6 @@ CRTTOOL			?=	${CRTTOOLPATH}/cert_create$
+@@ -914,10 +914,6 @@ CRTTOOL			?=	${CRTTOOLPATH}/cert_create$
  ENCTOOLPATH		?=	tools/encrypt_fw
  ENCTOOL			?=	${ENCTOOLPATH}/encrypt_fw${BIN_EXT}

@@ -11,7 +11,7 @@ 
  # Variables for use with sptool
  SPTOOLPATH		?=	tools/sptool
  SPTOOL			?=	${SPTOOLPATH}/sptool${BIN_EXT}
-@@ -1160,13 +1156,6 @@ endif
+@@ -1322,13 +1318,6 @@ endif
  clean:
  	@echo "  CLEAN"
  	$(call SHELL_REMOVE_DIR,${BUILD_PLAT})
@@ -25,7 +25,7 @@ 
  	${Q}${MAKE} PLAT=${PLAT} --no-print-directory -C ${CRTTOOLPATH} clean
  	${Q}${MAKE} PLAT=${PLAT} --no-print-directory -C ${ENCTOOLPATH} clean
  	${Q}${MAKE} --no-print-directory -C ${ROMLIBPATH} clean
-@@ -1175,13 +1164,6 @@ realclean distclean:
+@@ -1337,13 +1326,6 @@ realclean distclean:
  	@echo "  REALCLEAN"
  	$(call SHELL_REMOVE_DIR,${BUILD_BASE})
  	$(call SHELL_DELETE_ALL, ${CURDIR}/cscope.*)
@@ -39,37 +39,33 @@ 
  	${Q}${MAKE} --no-print-directory -C ${SPTOOLPATH} clean
  	${Q}${MAKE} PLAT=${PLAT} --no-print-directory -C ${CRTTOOLPATH} clean
  	${Q}${MAKE} PLAT=${PLAT} --no-print-directory -C ${ENCTOOLPATH} realclean
-@@ -1238,7 +1220,7 @@ certificates: ${CRT_DEPS} ${CRTTOOL}
+@@ -1400,7 +1382,7 @@ certificates: ${CRT_DEPS} ${CRTTOOL}
  	@${ECHO_BLANK_LINE}
  endif

 -${BUILD_PLAT}/${FIP_NAME}: ${FIP_DEPS} ${FIPTOOL}
 +${BUILD_PLAT}/${FIP_NAME}: ${FIP_DEPS}
- 	${Q}${FIPTOOL} create ${FIP_ARGS} $@
- 	${Q}${FIPTOOL} info $@
- 	@${ECHO_BLANK_LINE}
-@@ -1254,7 +1236,7 @@ fwu_certificates: ${FWU_CRT_DEPS} ${CRTT
+	$(eval ${CHECK_FIP_CMD})
+	${Q}${FIPTOOL} create ${FIP_ARGS} $@
+	${Q}${FIPTOOL} info $@
+@@ -1417,7 +1399,7 @@ fwu_certificates: ${FWU_CRT_DEPS} ${CRTT
  	@${ECHO_BLANK_LINE}
  endif

 -${BUILD_PLAT}/${FWU_FIP_NAME}: ${FWU_FIP_DEPS} ${FIPTOOL}
 +${BUILD_PLAT}/${FWU_FIP_NAME}: ${FWU_FIP_DEPS}
- 	${Q}${FIPTOOL} create ${FWU_FIP_ARGS} $@
- 	${Q}${FIPTOOL} info $@
- 	@${ECHO_BLANK_LINE}
-@@ -1279,24 +1261,10 @@ ${BUILD_PLAT}/${DDR_FIP_NAME}: ${DDR_FIP
+	$(eval ${CHECK_FWU_FIP_CMD})
+	${Q}${FIPTOOL} create ${FWU_FIP_ARGS} $@
+	${Q}${FIPTOOL} info $@
+@@ -1425,19 +1407,9 @@ ${BUILD_PLAT}/${FWU_FIP_NAME}: ${FWU_FIP
  	@echo "Built $@ successfully"
  	@${ECHO_BLANK_LINE}

 -fiptool: ${FIPTOOL}
  fip: ${BUILD_PLAT}/${FIP_NAME}
  fwu_fip: ${BUILD_PLAT}/${FWU_FIP_NAME}
- fip_ddr: ${BUILD_PLAT}/${DDR_FIP_NAME}

--.PHONY: ${FIPTOOL}
--${FIPTOOL}:
--	@${ECHO_BLANK_LINE}
--	@echo "Building $@"
+-${FIPTOOL}: FORCE
 -ifdef UNIX_MK
 -	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" FIPTOOL=${FIPTOOL} --no-print-directory -C ${FIPTOOLPATH}
 -else
@@ -77,14 +73,13 @@ 
 -# to pass the gnumake flags to nmake.
 -	${Q}set MAKEFLAGS= && ${MSVC_NMAKE} /nologo /f ${FIPTOOLPATH}/Makefile.msvc FIPTOOLPATH=$(subst /,\,$(FIPTOOLPATH)) FIPTOOL=$(subst /,\,$(FIPTOOL))
 -endif
--	@${ECHO_BLANK_LINE}
 -
  sptool: ${SPTOOL}
- .PHONY: ${SPTOOL}
- ${SPTOOL}:
+ ${SPTOOL}: FORCE
+	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" SPTOOL=${SPTOOL} --no-print-directory -C ${SPTOOLPATH}
 --- a/tools/fiptool/Makefile
 +++ b/tools/fiptool/Makefile
-@@ -38,7 +38,7 @@ all: ${PROJECT}
+@@ -48,7 +48,7 @@ all: ${PROJECT}

  ${PROJECT}: ${OBJECTS} Makefile
  	@echo "  HOSTLD  $@"
diff --git a/package/boot/tfa-layerscape/patches/003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch b/package/boot/tfa-layerscape/patches/003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch
index 167549d55b..73c5c66cae 100644
--- a/package/boot/tfa-layerscape/patches/003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch
+++ b/package/boot/tfa-layerscape/patches/003-plat-nxp-tools-fix-create_pbl-and-byte_swap-host-bui.patch
@@ -11,14 +11,14 @@  Signed-off-by: Biwen Li <biwen.li@nxp.com>
  tools/nxp/pbl_ch3.mk | 5 -----
  2 files changed, 8 deletions(-)

---- a/tools/nxp/pbl_ch2.mk
-+++ b/tools/nxp/pbl_ch2.mk
+--- a/tools/nxp/create_pbl/pbl_ch2.mk
++++ b/tools/nxp/create_pbl/pbl_ch2.mk
 @@ -19,8 +19,6 @@ ifeq ($(RCW),"")
  else
  	# Generate header for bl2.bin
  	$(Q)$(CST_DIR)/create_hdr_isbc --in ${BUILD_PLAT}/bl2.bin --out ${BUILD_PLAT}/hdr_bl2 ${BL2_INPUT_FILE}
 -	# Compile create_pbl tool
--	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${PLAT_TOOL_PATH};\
+-	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};\
  	# Add bl2.bin to RCW
  	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE}\
  			-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl ;\
@@ -26,18 +26,18 @@  Signed-off-by: Biwen Li <biwen.li@nxp.com>
  	${Q}echo "Platform ${PLAT} requires rcw file. Please set RCW to point to the right RCW file for boot mode ${BOOT_MODE}"
  else
  	# -a option appends the image for Chassis 3 devices in case of non secure boot
--	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${PLAT_TOOL_PATH};
+-	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};
  	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE} \
  	-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl ;
  # Swapping of RCW is required for QSPi Chassis 2 devices
---- a/tools/nxp/pbl_ch3.mk
-+++ b/tools/nxp/pbl_ch3.mk
+--- a/tools/nxp/create_pbl/pbl_ch3.mk
++++ b/tools/nxp/create_pbl/pbl_ch3.mk
 @@ -26,9 +26,6 @@ else
  	# Generate header for bl2.bin
  	$(Q)$(CST_DIR)/create_hdr_isbc --in ${BUILD_PLAT}/bl2.bin --out ${BUILD_PLAT}/hdr_bl2 ${BL2_INPUT_FILE}

 -	# Compile create_pbl tool
--	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${PLAT_TOOL_PATH};\
+-	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};\
 -
  	# Add Block Copy command for bl2.bin to RCW
  	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE}\
@@ -46,7 +46,7 @@  Signed-off-by: Biwen Li <biwen.li@nxp.com>
  ifeq ($(RCW),"")
  	${Q}echo "Platform ${PLAT} requires rcw file. Please set RCW to point to the right RCW file for boot mode ${BOOT_MODE}"
  else
--	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${PLAT_TOOL_PATH};
+-	${Q}${MAKE} CPPFLAGS="-DVERSION='\"${VERSION_STRING}\"'" --no-print-directory -C ${CREATE_PBL_TOOL_PATH};
 -
  	# Add Block Copy command and populate boot loc ptrfor bl2.bin to RCW
  	${CREATE_PBL} -r ${RCW} -i ${BUILD_PLAT}/bl2.bin -b ${BOOT_MODE} -c ${SOC_NUM} -d ${BL2_BASE} -e ${BL2_BASE} \
diff --git a/package/boot/tfa-layerscape/patches/004-plat-nxp-restore-ls1012afrdm-support.patch b/package/boot/tfa-layerscape/patches/004-plat-nxp-restore-ls1012afrdm-support.patch
new file mode 100644
index 0000000000..66efc87da2
--- /dev/null
+++ b/package/boot/tfa-layerscape/patches/004-plat-nxp-restore-ls1012afrdm-support.patch
@@ -0,0 +1,232 @@ 
+From 8c6a66feb721f18c930c7df03d1fbb7304107af6 Mon Sep 17 00:00:00 2001
+From: Wojciech Dubowik <Wojciech.Dubowik@westermo.com>
+Date: Thu, 20 Apr 2023 16:21:25 +0200
+Subject: [PATCH] tfa-layerscape: Restore ls1012afrdm support
+
+Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@westermo.com>
+---
+ plat/nxp/soc-ls1012a/ls1012afrdm/ddr_init.c   | 34 +++++++
+ plat/nxp/soc-ls1012a/ls1012afrdm/plat_def.h   | 92 +++++++++++++++++++
+ plat/nxp/soc-ls1012a/ls1012afrdm/platform.mk  | 25 +++++
+ .../soc-ls1012a/ls1012afrdm/platform_def.h    | 13 +++
+ plat/nxp/soc-ls1012a/ls1012afrdm/policy.h     | 16 ++++
+ 5 files changed, 180 insertions(+)
+ create mode 100644 plat/nxp/soc-ls1012a/ls1012afrdm/ddr_init.c
+ create mode 100644 plat/nxp/soc-ls1012a/ls1012afrdm/plat_def.h
+ create mode 100644 plat/nxp/soc-ls1012a/ls1012afrdm/platform.mk
+ create mode 100644 plat/nxp/soc-ls1012a/ls1012afrdm/platform_def.h
+ create mode 100644 plat/nxp/soc-ls1012a/ls1012afrdm/policy.h
+
+diff --git a/plat/nxp/soc-ls1012a/ls1012afrdm/ddr_init.c b/plat/nxp/soc-ls1012a/ls1012afrdm/ddr_init.c
+new file mode 100644
+index 000000000..8cb518540
+--- /dev/null
++++ b/plat/nxp/soc-ls1012a/ls1012afrdm/ddr_init.c
+@@ -0,0 +1,34 @@
++/*
++ * Copyright 2018-2022 NXP
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++#include <common/debug.h>
++#include <fsl_mmdc.h>
++
++#include <platform_def.h>
++
++long long init_ddr(void)
++{
++	static const struct fsl_mmdc_info mparam = {
++		.mdctl = U(0x04180000),
++		.mdpdc = U(0x00030035),
++		.mdotc = U(0x12554000),
++		.mdcfg0 = U(0xbabf7954),
++		.mdcfg1 = U(0xdb328f64),
++		.mdcfg2 = U(0x01ff00db),
++		.mdmisc = U(0x00001680),
++		.mdref = U(0x0f3c8000),
++		.mdrwd = U(0x00002000),
++		.mdor = U(0x00bf1023),
++		.mdasp = U(0x0000003f),
++		.mpodtctrl = U(0x0000022a),
++		.mpzqhwctrl = U(0xa1390003),
++	};
++
++	mmdc_init(&mparam, NXP_DDR_ADDR);
++	NOTICE("DDR Init Done\n");
++
++	return NXP_DRAM0_SIZE;
++}
+diff --git a/plat/nxp/soc-ls1012a/ls1012afrdm/plat_def.h b/plat/nxp/soc-ls1012a/ls1012afrdm/plat_def.h
+new file mode 100644
+index 000000000..eb745a0a3
+--- /dev/null
++++ b/plat/nxp/soc-ls1012a/ls1012afrdm/plat_def.h
+@@ -0,0 +1,92 @@
++/*
++ * Copyright 2022 NXP
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++#ifndef PLAT_DEF_H
++#define PLAT_DEF_H
++
++#include <arch.h>
++/*
++ * Required without TBBR.
++ * To include the defines for DDR PHY
++ * Images.
++ */
++#include <tbbr_img_def.h>
++
++#include <policy.h>
++#include <soc.h>
++
++/* DDR Related definition */
++#define PLAT_DEF_DRAM0_SIZE	0x20000000	/* 512 MB */
++
++#define NXP_SYSCLK_FREQ		125000000
++#define NXP_DDRCLK_FREQ		100000000
++
++/* UART related definition */
++#define NXP_CONSOLE_ADDR	NXP_UART_ADDR
++#define NXP_CONSOLE_BAUDRATE	115200
++
++#define NXP_SPD_EEPROM0         0x51
++
++/* Size of cacheable stacks */
++#if defined(IMAGE_BL2)
++#if defined(TRUSTED_BOARD_BOOT)
++#define PLATFORM_STACK_SIZE	0x2000
++#else
++#define PLATFORM_STACK_SIZE	0x1000
++#endif
++#elif defined(IMAGE_BL31)
++#define PLATFORM_STACK_SIZE	0x1000
++#endif
++
++/* SD block buffer */
++#define NXP_SD_BLOCK_BUF_SIZE	(0x00100000)
++#define NXP_SD_BLOCK_BUF_ADDR	ULL(0x80000000)
++
++#define BL2_LIMIT		(NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
++
++/* IO defines as needed by IO driver framework */
++#define MAX_IO_DEVICES		3
++#define MAX_IO_BLOCK_DEVICES	1
++#define MAX_IO_HANDLES		4
++
++/*
++ * FIP image defines - Offset at which FIP Image would be present
++ * Image would include Bl31 , Bl33 and Bl32 (optional)
++ */
++#ifdef POLICY_FUSE_PROVISION
++#define MAX_FIP_DEVICES		2
++#endif
++
++#ifndef MAX_FIP_DEVICES
++#define MAX_FIP_DEVICES		1
++#endif
++
++#ifdef PLAT_FIP_OFFSET
++#undef PLAT_FIP_OFFSET
++#endif
++#ifdef PLAT_FIP_MAX_SIZE
++#undef PLAT_FIP_MAX_SIZE
++#endif
++#define PLAT_FIP_OFFSET		0x60000
++#define PLAT_FIP_MAX_SIZE	0x170000
++
++/*
++ * ID of the secure physical generic timer interrupt used by the BL32.
++ */
++#define BL32_IRQ_SEC_PHY_TIMER	29
++
++/*
++ * Define properties of Group 1 Secure and Group 0 interrupts as per GICv3
++ * terminology. On a GICv2 system or mode, the lists will be merged and treated
++ * as Group 0 interrupts.
++ */
++#define PLAT_LS_G1S_IRQ_PROPS(grp) \
++	INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
++			GIC_INTR_CFG_LEVEL)
++
++#define PLAT_LS_G0_IRQ_PROPS(grp)
++
++#endif
+diff --git a/plat/nxp/soc-ls1012a/ls1012afrdm/platform.mk b/plat/nxp/soc-ls1012a/ls1012afrdm/platform.mk
+new file mode 100644
+index 000000000..270e92420
+--- /dev/null
++++ b/plat/nxp/soc-ls1012a/ls1012afrdm/platform.mk
+@@ -0,0 +1,25 @@
++#
++# Copyright 2018-2022 NXP
++#
++# SPDX-License-Identifier: BSD-3-Clause
++#
++
++# board-specific build parameters
++BOOT_MODE	:= qspi
++BOARD		:= ls1012afrdm
++
++# DDR Compilation Configs
++DDRC_NUM_CS     :=      1
++
++# On-Board Flash Details
++QSPI_FLASH_SZ   :=      0x4000000
++
++BL2_SOURCES	+=	${BOARD_PATH}/ddr_init.c
++
++SUPPORTED_BOOT_MODE	:=	qspi
++
++# Adding platform board build info
++include plat/nxp/common/plat_make_helper/plat_common_def.mk
++
++# Adding SoC build info
++include plat/nxp/soc-ls1012a/soc.mk
+diff --git a/plat/nxp/soc-ls1012a/ls1012afrdm/platform_def.h b/plat/nxp/soc-ls1012a/ls1012afrdm/platform_def.h
+new file mode 100644
+index 000000000..7daf1c02c
+--- /dev/null
++++ b/plat/nxp/soc-ls1012a/ls1012afrdm/platform_def.h
+@@ -0,0 +1,13 @@
++/*
++ * Copyright 2022 NXP
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++#ifndef PLATFORM_DEF_H
++#define PLATFORM_DEF_H
++
++#include <plat_def.h>
++#include <plat_default_def.h>
++
++#endif /* PLATFORM_DEF_H */
+diff --git a/plat/nxp/soc-ls1012a/ls1012afrdm/policy.h b/plat/nxp/soc-ls1012a/ls1012afrdm/policy.h
+new file mode 100644
+index 000000000..a782d01c7
+--- /dev/null
++++ b/plat/nxp/soc-ls1012a/ls1012afrdm/policy.h
+@@ -0,0 +1,16 @@
++/*
++ * Copyright 2018-2022 NXP
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++#ifndef POLICY_H
++#define	POLICY_H
++
++/*
++ * Set this to 0x0 to leave the default SMMU page size in sACR
++ * Set this to 0x1 to change the SMMU page size to 64K
++ */
++#define POLICY_SMMU_PAGESZ_64K 0x0
++
++#endif /* POLICY_H */
+--
+2.34.1
+