b/package/boot/arm-trusted-firmware-mvebu/Makefile
@@ -149,13 +149,13 @@ define Download/mv-ddr-marvell
endef
MOX_BB_NAME:=mox-boot-builder
-MOX_BB_RELEASE:=v2021.04.09
+MOX_BB_RELEASE:=v2021.09.07
MOX_BB_SOURCE:=$(MOX_BB_NAME)-$(MOX_BB_RELEASE).tar.bz2
define Download/mox-boot-builder
FILE:=$(MOX_BB_SOURCE)
URL:=https://gitlab.nic.cz/turris/mox-boot-builder/-/archive/$(MOX_BB_RELEASE)
- HASH:=f0ed4fa25006e36a07d4256f633e3f25d6f8898dbe2e081e578251a182885520
+ HASH:=fd5fe276a3b0dee3177d61c017907a8eb23cd2169478fa78e9a3a836cfe3a4a8
endef
CM3_GCC_NAME:=gcc-arm
a/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/100-wtmi-uart-fix-UART-baudrate-divisor-calculation.patch
b/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/100-wtmi-uart-fix-UART-baudrate-divisor-calculation.patch
deleted file mode 100644
a/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/100-wtmi-uart-fix-UART-baudrate-divisor-calculation.patch
@@ -1,66 +0,0 @@
-From fb5e436843614f93b30aec0a2a00e5e59a133aab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Sat, 15 May 2021 17:44:24 +0200
-Subject: [PATCH] wtmi: uart: fix UART baudrate divisor calculation
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The UART code uses the xtal clock as parent for UART baudrate
-generation, but it assumes that xtal runs at 25 MHz, which isn't
-necessarily the case for all A3720 boards.
-
-Use get_ref_clk() to determine xtal clock rate.
-
-Use rounding division to compute the divisor value.
-
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Suggested-by: Pali Rohár <pali@kernel.org>
----
- wtmi/types.h | 5 +++++
- wtmi/uart.c | 7 ++++---
- 2 files changed, 9 insertions(+), 3 deletions(-)
-
-diff --git a/wtmi/types.h b/wtmi/types.h
-index 7a6c6c6..ea873fc 100644
---- a/wtmi/types.h
-+++ b/wtmi/types.h
-@@ -47,4 +47,9 @@ typedef u32 size_t;
-
- #define maybe_unused __attribute__((unused))
-
-+static inline u32 div_round_closest_u32(u32 x, u32 d)
-+{
-+ return (x + d / 2) / d;
-+}
-+
- #endif /* __TYPES_H */
-diff --git a/wtmi/uart.c b/wtmi/uart.c
-index d40633d..75864b5 100644
---- a/wtmi/uart.c
-+++ b/wtmi/uart.c
-@@ -40,8 +40,6 @@
- #include "stdio.h"
- #include "debug.h"
-
--#define UART_CLOCK_FREQ 25804800
--
- const struct uart_info uart1_info = {
- .rx = 0xc0012000,
- .tx = 0xc0012004,
-@@ -76,8 +74,11 @@ void uart_set_stdio(const struct uart_info *info)
-
- void uart_reset(const struct uart_info *info, unsigned int baudrate)
- {
-+ u32 parent_rate = get_ref_clk() * 1000000;
-+
- /* set baudrate */
-- writel((UART_CLOCK_FREQ / baudrate / 16), info->baud);
-+ writel(div_round_closest_u32(parent_rate, baudrate * 16), info->baud);
-+
- /* set Programmable Oversampling Stack to 0, UART defaults to 16X
scheme */
- writel(0, info->possr);
-
---
-2.30.2
-
a/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/101-fix-clock-a3700-change-pwm-clock-for-600-600-and-120.patch
b/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/101-fix-clock-a3700-change-pwm-clock-for-600-600-and-120.patch
deleted file mode 100644
a/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/101-fix-clock-a3700-change-pwm-clock-for-600-600-and-120.patch
@@ -1,48 +0,0 @@
-From 3f33626ac7037bd62df9391e899f50e076e58cf7 Mon Sep 17 00:00:00 2001
-From: zachary <zhangzg@marvell.com>
-Date: Wed, 25 Oct 2017 15:50:29 +0800
-Subject: [PATCH] fix: clock: a3700: change pwm clock for 600/600 and
1200/750
- preset
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch is to change pwm clock from 100MHz to 50MHz for 600/600 and
-1200/750 preset to align with other presets.
-
-Change-Id: I067e189043be8c776bd3e7015a06f8ddf2590b96
-Signed-off-by: zachary <zhangzg@marvell.com>
-Reviewed-on: http://vgitil04.il.marvell.com:8080/45513
-Tested-by: iSoC Platform CI <ykjenk@marvell.com>
-Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
-Reviewed-by: Hua Jing <jinghua@marvell.com>
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
----
- wtmi/clock.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/wtmi/clock.c b/wtmi/clock.c
-index 97c2825..1a1f0c6 100644
---- a/wtmi/clock.c
-+++ b/wtmi/clock.c
-@@ -447,7 +447,7 @@ static struct clock_cfg clk_cfg_all[] = {\
- /* NorthBridge */\
- {{TBG_A_S, TBG_B_S, TBG_B_S, TBG_B_S, TBG_A_P, TBG_A_P, TBG_A_P,\
- TBG_B_S, TBG_B_S, TBG_A_P, TBG_B_S, TBG_A_P, TBG_B_S},\
-- {2, 5, 2, 4, 1, 2, 6, 2}, /* DIV0 */\
-+ {4, 5, 2, 4, 1, 2, 6, 2}, /* DIV0 */\
- {1, 5, 2, 5, 2, 3, 2, 2, 3}, /* DIV1 */\
- {4, 1, 5, 1, 3, 1, 2, 0, 0, 1} }, /* DIV2 */\
- /* SouthBridge */\
-@@ -495,7 +495,7 @@ static struct clock_cfg clk_cfg_all[] = {\
- /* NorthBridge */\
- {{TBG_B_S, TBG_B_S, TBG_B_S, TBG_B_S, TBG_B_S, TBG_B_S, TBG_B_S,\
- TBG_B_S, TBG_A_S, TBG_B_S, TBG_A_P, TBG_B_S, TBG_A_S},\
-- {3, 4, 3, 4, 1, 1, 5, 1}, /* DIV0 */\
-+ {6, 4, 3, 4, 1, 1, 5, 1}, /* DIV0 */\
- {1, 6, 3, 4, 1, 6, 1, 1, 6}, /* DIV1 */\
- {4, 1, 6, 1, 3, 1, 3, 0, 0, 1} }, /* DIV2 */\
- /* SouthBridge */\
---
-2.30.2
-
a/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/102-avs-Validate-VDD-value-from-OTP.patch
b/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/102-avs-Validate-VDD-value-from-OTP.patch
deleted file mode 100644
bump version and remove patches that have been applied 176d701 wtmi: Wait 1s after putting PHYs INTn pin low 2eeccfe wtmi: Change comment describing reset workaround e8c94a5 wtmi: Count RAM size from both CS0 and CS1 995979e wtmi: Rename macro e29eb29 wtmi: soc: Fix start_ap_workaround() for TF-A with debug 81245ed wtmi: Use constant name PLAT_MARVELL_MAILBOX_BASE 18ccb83 wtmi: Do a proper UART reset with clock change as described in spec 15ff106 avs: Validate VDD value from OTP 3f33626 fix: clock: a3700: change pwm clock for 600/600 and 1200/750 preset fb5e436 wtmi: uart: fix UART baudrate divisor calculation Signed-off-by: sean lee <ilf@live.com> --- .../boot/arm-trusted-firmware-mvebu/Makefile | 4 +- ...ix-UART-baudrate-divisor-calculation.patch | 66 ------------------- ...change-pwm-clock-for-600-600-and-120.patch | 48 -------------- .../102-avs-Validate-VDD-value-from-OTP.patch | 52 --------------- 4 files changed, 2 insertions(+), 168 deletions(-) delete mode 100644 package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/100-wtmi-uart-fix-UART-baudrate-divisor-calculation.patch delete mode 100644 package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/101-fix-clock-a3700-change-pwm-clock-for-600-600-and-120.patch delete mode 100644 package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/102-avs-Validate-VDD-value-from-OTP.patch a/package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/102-avs-Validate-VDD-value-from-OTP.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 15ff10623c83ee2e626d93d16e022b115dcb608f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org> -Date: Sat, 10 Apr 2021 16:56:12 +0200 -Subject: [PATCH] avs: Validate VDD value from OTP -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -CPU VDD voltage value for 1.2 GHz frequency on some Espressobin boards is -not set and raw value 0x00 is returned. In this case init_avs() function -calculated CPU VDD voltage value to 0x00 + AVS_VDD_BASE = 0.898 V, which is -too low for any operation and Espressobin board immediately crashed -init_avs() function set this low value. - -This patch fixes above issue by validating returned VDD value from OTP and -using default VDD value when invalid value is in OTP. With this patch -init_avs() function does cause CPU crash anymore. - -Signed-off-by: Pali Rohár <pali@kernel.org> -Signed-off-by: Marek Behún <marek.behun@nic.cz> ---- - wtmi/avs.c | 14 ++++++++++---- - 1 file changed, 10 insertions(+), 4 deletions(-) - -diff --git a/wtmi/avs.c b/wtmi/avs.c -index 36ca9fa..4624359 100644 ---- a/wtmi/avs.c -+++ b/wtmi/avs.c -@@ -140,10 +140,16 @@ int init_avs(u32 speed) - } - - if (svc_rev >= SVC_REVISION_2) { -- vdd_otp = ((otp_data[OTP_DATA_SVC_SPEED_ID] >> shift) + -- AVS_VDD_BASE) & AVS_VDD_MASK; -- regval |= (vdd_otp << HIGH_VDD_LIMIT_OFF); -- regval |= (vdd_otp << LOW_VDD_LIMIT_OFF); -+ vdd_otp = (otp_data[OTP_DATA_SVC_SPEED_ID] >> shift) & -+ AVS_VDD_MASK; -+ if (!vdd_otp || vdd_otp + AVS_VDD_BASE > AVS_VDD_MASK) { -+ regval |= (vdd_default << HIGH_VDD_LIMIT_OFF); -+ regval |= (vdd_default << LOW_VDD_LIMIT_OFF); -+ } else { -+ vdd_otp += AVS_VDD_BASE; -+ regval |= (vdd_otp << HIGH_VDD_LIMIT_OFF); -+ regval |= (vdd_otp << LOW_VDD_LIMIT_OFF); -+ } - } else { - regval |= (vdd_default << HIGH_VDD_LIMIT_OFF); - regval |= (vdd_default << LOW_VDD_LIMIT_OFF); --- -2.30.2 -