From patchwork Sun Dec 6 14:20:19 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Josh Bendavid X-Patchwork-Id: 553133 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from arrakis.dune.hu (arrakis.dune.hu [78.24.191.176]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 9B7491402A0 for ; Mon, 7 Dec 2015 01:21:03 +1100 (AEDT) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b=rAyfstMr; dkim-atps=neutral Received: from arrakis.dune.hu (localhost [127.0.0.1]) by arrakis.dune.hu (Postfix) with ESMTP id 6402D2805AA; Sun, 6 Dec 2015 15:20:20 +0100 (CET) Received: from arrakis.dune.hu (localhost [127.0.0.1]) by arrakis.dune.hu (Postfix) with ESMTP id 3C0BB28063C for ; Sun, 6 Dec 2015 15:20:16 +0100 (CET) X-policyd-weight: using cached result; rate: -8.5 Received: from mail-pf0-f169.google.com (mail-pf0-f169.google.com [209.85.192.169]) by arrakis.dune.hu (Postfix) with ESMTPS for ; Sun, 6 Dec 2015 15:20:14 +0100 (CET) Received: by pfdd184 with SMTP id d184so50750033pfd.3 for ; Sun, 06 Dec 2015 06:20:19 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date:message-id:subject :from:to:cc:content-type; bh=slIDKqF0a+LW8Cvf8gGM9uere3zXShrjlNk+a64Bk14=; b=rAyfstMr4eLUqLs6Tglpq4jwG4YV2TbF7HineoHib33Tg9nKj7zWRwr8cqmOkGHbLl P1D+xPGBVy5r1uIY7aFZxc0RP7kjBukM3X3brudxN7mJf0MQu7q/Tvy8npqO557LnZIS mVTFWbAuIi2MTY2K+g6Ng4OtyD2sbdoQeWejORxIjAtv455jFiNwxwMMBZjO+ZoRW3nt t+UDvoLKtkEz/+cGA+bXvS0CEd/PLXjlZsF7Hzi9/ICtMSQ2aOvvhJBtJqYSS+/hKDyh 6zxHblSKTF1OahUvRjjKWEOYfs+ZW0Xrr8AG9l4VYqI6iz4K/IsGqwlmmh+7r+Y43vgQ Zmrw== MIME-Version: 1.0 X-Received: by 10.98.19.201 with SMTP id 70mr36220564pft.47.1449411619339; Sun, 06 Dec 2015 06:20:19 -0800 (PST) Received: by 10.66.50.69 with HTTP; Sun, 6 Dec 2015 06:20:19 -0800 (PST) In-Reply-To: References: Date: Sun, 6 Dec 2015 15:20:19 +0100 X-Google-Sender-Auth: ROJb3tHY2d9tubS4THanmonfGyQ Message-ID: From: Josh Bendavid To: Jonas Gorski , John Crispin Cc: OpenWrt Development List Subject: Re: [OpenWrt-Devel] [PATCH] [ipq806x] Add initial support for TP-Link Archer C2600 X-BeenThere: openwrt-devel@lists.openwrt.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: OpenWrt Development List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: openwrt-devel-bounces@lists.openwrt.org Sender: "openwrt-devel" From: Josh Bendavid Add initial support for Archer C2600 to Makefiles and profiles. This is sufficient to build a working factory image. Sysupgrade image is not implemented yet. Currently wired network is working, but LED's/buttons/wireless are not. Updated to create a separate dts file for c2600, which is currently identical to the ap148 aside that the sata-related sections have been removed. Signed-off-by: Josh Bendavid --- On 5 December 2015 at 15:08, Jonas Gorski wrote: > Hi, > > On Sat, Dec 5, 2015 at 5:13 AM, Josh Bendavid > wrote: > > From: Josh Bendavid > > > > Add initial support for Archer C2600 to Makefiles and profiles. This is > > sufficient to build a working factory image. Sysupgrade image is not > > implemented yet. Currently wired network is working, but > > LED's/buttons/wireless are not. > > > > Signed-off-by: Josh Bendavid > > --- > > > > diff --git a/include/image.mk b/include/image.mk > > index fd5e3f4..9ad2d43 100644 > > --- a/include/image.mk > > +++ b/include/image.mk > > @@ -327,6 +327,16 @@ define Build/netgear-dni > > mv $@.new $@ > > endef > > > > +define Build/tplink-safe > > + $(STAGING_DIR_HOST)/bin/tplink-safeloader \ > > + -B $(TPLINK_BOARD_ID) -V OpenWrt.$(REVISION) \ > > + -k $(word 1,$^) \ > > + -r $(word 2,$^) \ > > + -j \ > > + -o $@.new > > + mv $@.new $@ > > +endef > > + > > define Build/fit > > $(TOPDIR)/scripts/mkits.sh \ > > -D $(DEVICE_NAME) -o $@.its -k $@ \ > > diff --git a/target/linux/ipq806x/image/Makefile > > b/target/linux/ipq806x/image/Makefile > > index 14cf442..8e6a174 100644 > > --- a/target/linux/ipq806x/image/Makefile > > +++ b/target/linux/ipq806x/image/Makefile > > @@ -85,6 +85,18 @@ define Device/DniImage > > endef > > DEVICE_VARS += KERNEL_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID > DEVICE_BLOCK_SIZE > > DEVICE_PAGE_SIZE > > > > +define Device/TpSafeImage > > + PROFILES += $$(DEVICE_NAME) > > + FILESYSTEMS := squashfs > > + KERNEL_SUFFIX := -uImage > > + KERNEL = kernel-bin | append-dtb | uImage none > > + KERNEL_NAME := zImage > > + TPLINK_BOARD_ID := > > + IMAGES := factory.bin > > + IMAGE/factory.bin := tplink-safe > > +endef > > +DEVICE_VARS += TPLINK_BOARD_ID > > + > > define Device/AP148 > > $(call Device/FitImage) > > $(call Device/UbiFit) > > @@ -103,6 +115,15 @@ define Device/AP148-legacy > > BOARD_NAME := ap148 > > endef > > > > +define Device/C2600 > > + $(call Device/TpSafeImage) > > + DEVICE_DTS := qcom-ipq8064-ap148 > > The TP-Link doesn't have a eSATA port, so please create its own dts file > for it. > > > Jonas > diff --git a/include/image.mk b/include/image.mk index fd5e3f4..fab3c8a 100644 --- a/include/image.mk +++ b/include/image.mk @@ -327,6 +327,17 @@ define Build/netgear-dni mv $@.new $@ endef +define Build/tplink-safe + $(STAGING_DIR_HOST)/bin/tplink-safeloader \ + -B $(TPLINK_BOARD_ID) -V OpenWrt.$(REVISION) \ + -k $(word 1,$^) \ + -r $(word 2,$^) \ + -j \ + $(if $(findstring sysupgrade,$1),-S) \ + -o $@.new + mv $@.new $@ +endef + define Build/fit $(TOPDIR)/scripts/mkits.sh \ -D $(DEVICE_NAME) -o $@.its -k $@ \ diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index b054230..e000e3d 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -13,7 +13,8 @@ board=$(ipq806x_board_name) case "$board" in ap148 |\ -r7500) +r7500 |\ +c2600) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh index 5b27bde..262183f 100644 --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh @@ -23,6 +23,9 @@ ipq806x_board_detect() { *"R7500") name="r7500" ;; + *"C2600") + name="c2600" + ;; esac [ -z "$name" ] && name="unknown" diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index 14cf442..0445914 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -85,6 +85,18 @@ define Device/DniImage endef DEVICE_VARS += KERNEL_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID DEVICE_BLOCK_SIZE DEVICE_PAGE_SIZE +define Device/TpSafeImage + PROFILES += $$(DEVICE_NAME) + FILESYSTEMS := squashfs + KERNEL_SUFFIX := -uImage + KERNEL = kernel-bin | append-dtb | uImage none + KERNEL_NAME := zImage + TPLINK_BOARD_ID := + IMAGES := factory.bin + IMAGE/factory.bin := tplink-safe +endef +DEVICE_VARS += TPLINK_BOARD_ID + define Device/AP148 $(call Device/FitImage) $(call Device/UbiFit) @@ -103,6 +115,15 @@ define Device/AP148-legacy BOARD_NAME := ap148 endef +define Device/C2600 + $(call Device/TpSafeImage) + DEVICE_DTS := qcom-ipq8064-c2600 + BLOCKSIZE := 128KiB + PAGESIZE := 2048 + BOARD_NAME := ap148 + TPLINK_BOARD_ID := C2600 +endef + define Device/DB149 $(call Device/FitImage) DEVICE_DTS := qcom-ipq8064-db149 @@ -121,6 +142,6 @@ define Device/R7500 BOARD_NAME := r7500 endef -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 +TARGET_DEVICES += AP148 AP148-legacy C2600 DB149 R7500 $(eval $(call BuildImage)) diff --git a/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch index e69de29..e750b98 100644 --- a/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch +++ b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch @@ -0,0 +1,246 @@ +diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +--- a/arch/arm/boot/dts/Makefile 2015-11-25 22:51:15.148899604 +0100 ++++ b/arch/arm/boot/dts/Makefile 2015-12-06 14:33:31.092396982 +0100 +@@ -362,6 +362,7 @@ + qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-db149.dtb \ + qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-c2600.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb +diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 1970-01-01 01:00:00.000000000 +0100 ++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 2015-12-06 14:20:05.152365670 +0100 +@@ -0,0 +1,231 @@ ++#include "qcom-ipq8064-v1.0.dtsi" ++ ++/ { ++ model = "TP-Link Archer C2600"; ++ compatible = "tplink,c2600", "qcom,ipq8064"; ++ ++ memory@0 { ++ reg = <0x42000000 0x1e000000>; ++ device_type = "memory"; ++ }; ++ ++ reserved-memory { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ rsvd@41200000 { ++ reg = <0x41200000 0x300000>; ++ no-map; ++ }; ++ }; ++ ++ aliases { ++ serial0 = &uart4; ++ mdio-gpio0 = &mdio0; ++ }; ++ ++ chosen { ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ ++ soc { ++ pinmux@800000 { ++ i2c4_pins: i2c4_pinmux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ bias-disable; ++ }; ++ ++ spi_pins: spi_pins { ++ mux { ++ pins = "gpio18", "gpio19", "gpio21"; ++ function = "gsbi5"; ++ drive-strength = <10>; ++ bias-none; ++ }; ++ }; ++ ++ nand_pins: nand_pins { ++ mux { ++ pins = "gpio34", "gpio35", "gpio36", ++ "gpio37", "gpio38", "gpio39", ++ "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-disable; ++ }; ++ ++ pullups { ++ pins = "gpio39"; ++ bias-pull-up; ++ }; ++ ++ hold { ++ pins = "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ bias-bus-hold; ++ }; ++ }; ++ ++ mdio0_pins: mdio0_pins { ++ mux { ++ pins = "gpio0", "gpio1"; ++ function = "gpio"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ ++ rgmii2_pins: rgmii2_pins { ++ mux { ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; ++ function = "rgmii2"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ }; ++ ++ gsbi@16300000 { ++ qcom,mode = ; ++ status = "ok"; ++ serial@16340000 { ++ status = "ok"; ++ }; ++ /* ++ * The i2c device on gsbi4 should not be enabled. ++ * On ipq806x designs gsbi4 i2c is meant for exclusive ++ * RPM usage. Turning this on in kernel manifests as ++ * i2c failure for the RPM. ++ */ ++ }; ++ ++ gsbi5: gsbi@1a200000 { ++ qcom,mode = ; ++ status = "ok"; ++ ++ spi4: spi@1a280000 { ++ status = "ok"; ++ spi-max-frequency = <50000000>; ++ ++ pinctrl-0 = <&spi_pins>; ++ pinctrl-names = "default"; ++ ++ cs-gpios = <&qcom_pinmux 20 0>; ++ ++ flash: m25p80@0 { ++ compatible = "s25fl256s1"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <50000000>; ++ reg = <0>; ++ ++ linux,part-probe = "qcom-smem"; ++ }; ++ }; ++ }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ phy-tx0-term-offset = <7>; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ phy-tx0-term-offset = <7>; ++ }; ++ ++ nand@1ac00000 { ++ status = "ok"; ++ ++ pinctrl-0 = <&nand_pins>; ++ pinctrl-names = "default"; ++ ++ nand-ecc-strength = <4>; ++ nand-bus-width = <8>; ++ ++ linux,part-probe = "qcom-smem"; ++ }; ++ ++ mdio0: mdio { ++ compatible = "virtual,mdio-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; ++ pinctrl-0 = <&mdio0_pins>; ++ pinctrl-names = "default"; ++ ++ phy0: ethernet-phy@0 { ++ device_type = "ethernet-phy"; ++ reg = <0>; ++ qca,ar8327-initvals = < ++ 0x00004 0x7600000 /* PAD0_MODE */ ++ 0x00008 0x1000000 /* PAD5_MODE */ ++ 0x0000c 0x80 /* PAD6_MODE */ ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ ++ 0x000e0 0xc74164de /* SGMII_CTRL */ ++ 0x0007c 0x4e /* PORT0_STATUS */ ++ 0x00094 0x4e /* PORT6_STATUS */ ++ >; ++ }; ++ ++ phy4: ethernet-phy@4 { ++ device_type = "ethernet-phy"; ++ reg = <4>; ++ }; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ phy-handle = <&phy4>; ++ qcom,id = <1>; ++ ++ pinctrl-0 = <&rgmii2_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++}; ++ ++&adm_dma { ++ status = "ok"; ++}; diff --git a/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch index e69de29..cd4341e 100644 --- a/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch +++ b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch @@ -0,0 +1,246 @@ +diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +--- a/arch/arm/boot/dts/Makefile 2015-11-25 22:51:15.148899604 +0100 ++++ b/arch/arm/boot/dts/Makefile 2015-12-06 14:33:31.092396982 +0100 +@@ -453,6 +453,7 @@ + qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-db149.dtb \ + qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-c2600.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb +diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 1970-01-01 01:00:00.000000000 +0100 ++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 2015-12-06 14:20:05.152365670 +0100 +@@ -0,0 +1,231 @@ ++#include "qcom-ipq8064-v1.0.dtsi" ++ ++/ { ++ model = "TP-Link Archer C2600"; ++ compatible = "tplink,c2600", "qcom,ipq8064"; ++ ++ memory@0 { ++ reg = <0x42000000 0x1e000000>; ++ device_type = "memory"; ++ }; ++ ++ reserved-memory { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ rsvd@41200000 { ++ reg = <0x41200000 0x300000>; ++ no-map; ++ }; ++ }; ++ ++ aliases { ++ serial0 = &uart4; ++ mdio-gpio0 = &mdio0; ++ }; ++ ++ chosen { ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ ++ soc { ++ pinmux@800000 { ++ i2c4_pins: i2c4_pinmux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ bias-disable; ++ }; ++ ++ spi_pins: spi_pins { ++ mux { ++ pins = "gpio18", "gpio19", "gpio21"; ++ function = "gsbi5"; ++ drive-strength = <10>; ++ bias-none; ++ }; ++ }; ++ ++ nand_pins: nand_pins { ++ mux { ++ pins = "gpio34", "gpio35", "gpio36", ++ "gpio37", "gpio38", "gpio39", ++ "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-disable; ++ }; ++ ++ pullups { ++ pins = "gpio39"; ++ bias-pull-up; ++ }; ++ ++ hold { ++ pins = "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ bias-bus-hold; ++ }; ++ }; ++ ++ mdio0_pins: mdio0_pins { ++ mux { ++ pins = "gpio0", "gpio1"; ++ function = "gpio"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ ++ rgmii2_pins: rgmii2_pins { ++ mux { ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; ++ function = "rgmii2"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ }; ++ ++ gsbi@16300000 { ++ qcom,mode = ; ++ status = "ok"; ++ serial@16340000 { ++ status = "ok"; ++ }; ++ /* ++ * The i2c device on gsbi4 should not be enabled. ++ * On ipq806x designs gsbi4 i2c is meant for exclusive ++ * RPM usage. Turning this on in kernel manifests as ++ * i2c failure for the RPM. ++ */ ++ }; ++ ++ gsbi5: gsbi@1a200000 { ++ qcom,mode = ; ++ status = "ok"; ++ ++ spi4: spi@1a280000 { ++ status = "ok"; ++ spi-max-frequency = <50000000>; ++ ++ pinctrl-0 = <&spi_pins>; ++ pinctrl-names = "default"; ++ ++ cs-gpios = <&qcom_pinmux 20 0>; ++ ++ flash: m25p80@0 { ++ compatible = "s25fl256s1"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <50000000>; ++ reg = <0>; ++ ++ linux,part-probe = "qcom-smem"; ++ }; ++ }; ++ }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ phy-tx0-term-offset = <7>; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ phy-tx0-term-offset = <7>; ++ }; ++ ++ nand@1ac00000 { ++ status = "ok"; ++ ++ pinctrl-0 = <&nand_pins>; ++ pinctrl-names = "default"; ++ ++ nand-ecc-strength = <4>; ++ nand-bus-width = <8>; ++ ++ linux,part-probe = "qcom-smem"; ++ }; ++ ++ mdio0: mdio { ++ compatible = "virtual,mdio-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; ++ pinctrl-0 = <&mdio0_pins>; ++ pinctrl-names = "default"; ++ ++ phy0: ethernet-phy@0 { ++ device_type = "ethernet-phy"; ++ reg = <0>; ++ qca,ar8327-initvals = < ++ 0x00004 0x7600000 /* PAD0_MODE */ ++ 0x00008 0x1000000 /* PAD5_MODE */ ++ 0x0000c 0x80 /* PAD6_MODE */ ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ ++ 0x000e0 0xc74164de /* SGMII_CTRL */ ++ 0x0007c 0x4e /* PORT0_STATUS */ ++ 0x00094 0x4e /* PORT6_STATUS */ ++ >; ++ }; ++ ++ phy4: ethernet-phy@4 { ++ device_type = "ethernet-phy"; ++ reg = <4>; ++ }; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ phy-handle = <&phy4>; ++ qcom,id = <1>; ++ ++ pinctrl-0 = <&rgmii2_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++}; ++ ++&adm_dma { ++ status = "ok"; ++}; diff --git a/target/linux/ipq806x/profiles/tplink.mk b/target/linux/ipq806x/profiles/tplink.mk index e69de29..d3f5a6c 100644 --- a/target/linux/ipq806x/profiles/tplink.mk +++ b/target/linux/ipq806x/profiles/tplink.mk @@ -0,0 +1,20 @@ +# +# Copyright (c) 2014 The Linux Foundation. All rights reserved. +# Copyright (C) 2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/C2600 + NAME:=TP-Link Archer C2600 + PACKAGES:= \ + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \ + kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \ + kmod-ath10k ath10k-firmware-qca99x0 wpad-mini +endef + +define Profile/C2600/Description + Package set for the TP-Link Archer C2600. +endef +$(eval $(call Profile,C2600))