diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index e3b8500..df30085 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -241,6 +241,9 @@ rt-n14u)
        set_wifi_led "$board:blue:air"
        set_usb_led "$board:blue:usb"
        ;;
+sk-wb8)
+       set_usb_led "$board:green:usb"
+       ;;
 tiny-ac)
        set_wifi_led "$board:orange:wifi"
        set_usb_led "$board:green:usb"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 3c958ae..3e876d2 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -77,6 +77,7 @@ ramips_setup_interfaces()
        pbr-m1|\
        psg1208|\
        sap-g3200u3|\
+       sk-wb8|\
        wf-2881|\
        whr-300hp2|\
        whr-600d|\
@@ -310,6 +311,9 @@ ramips_setup_macs()
                lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(mtd_get_mac_binary factory 32772)
                ;;
+       sk-wb8)
+               wan_mac=$(mtd_get_mac_binary factory 57350)
+               ;;
        tew-691gr)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 3)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 550ec55..0997cc8 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -370,6 +370,9 @@ ramips_board_detect() {
        *"SAP-G3200U3")
                name="sap-g3200u3"
                ;;
+       *"SK-WB8")
+               name="sk-wb8"
+               ;;
        *"SL-R7205"*)
                name="sl-r7205"
                ;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 73ba6e6..fcc1b79 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -109,6 +109,7 @@ platform_check_image() {
        rt-n56u|\
        rut5xx|\
        sap-g3200u3|\
+       sk-wb8|\
        sl-r7205|\
        tew-691gr|\
        tew-692gr|\
diff --git a/target/linux/ramips/dts/SK-WB8.dts
b/target/linux/ramips/dts/SK-WB8.dts
new file mode 100644
index 0000000..edd95ad
--- /dev/null
+++ b/target/linux/ramips/dts/SK-WB8.dts
@@ -0,0 +1,121 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+       compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+       model = "SamKnows SK-WB8";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus@1E000000 {
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x7b0000>;
+                               };
+
+                       };
+               };
+       };
+
+       pcie@1e140000 {
+               status = "okay";
+
+               pcie0 {
+                       mt76@0,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x8000>;
+                               mediatek,2ghz = <0>;
+                       };
+               };
+
+               pcie1 {
+                       mt76@1,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x0000>;
+                               mediatek,5ghz = <0>;
+                       };
+               };
+       };
+
+       ethernet@1e100000 {
+               mtd-mac-address = <&factory 0xe000>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               wps {
+                       label = "twsz:green:wps";
+                       gpios = <&gpio1 46 1>;
+               };
+
+               usb {
+                       label = "twsz:green:usb";
+                       gpios = <&gpio1 47 1>;
+               }
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio1 43 1>;
+                       linux,code = <0x211>;
+               };
+               label = "reset";
+                       gpios = <&gpio0 41 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uart2",
"uart3", "rgmii2", "sdhci";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+};
\ No newline at end of file
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index 0af9596..3e2f7eb 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -132,6 +132,12 @@ define Device/ubnt-erx
 endef
 TARGET_DEVICES += ubnt-erx

+define Device/sk-wb8
+  DTS := SK-WB8
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+TARGET_DEVICES += sk-wb8
+
 # FIXME: is this still needed?
 define Image/Prepare
 #define Build/Compile
diff --git a/target/linux/ramips/mt7621/profiles/sk-wb8.mk
b/target/linux/ramips/mt7621/profiles/sk-wb8.mk
new file mode 100644
index 0000000..efa4858
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/sk-wb8.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/SK-WB8
+       NAME:=SK-WB8 Profile
+       PACKAGES:=\
+               kmod-usb-core kmod-usb3 \
+               kmod-ledtrig-usbdev
+endef
+
+define Profile/SK-WB8/Description
+       Package set optimized for the SamKnows SK-WB8.
+endef
+$(eval $(call Profile,SK-WB8))
